4.
Remove the two Phillips PM2.0×3.0 screws (1) and the five Phillips PM1.5×2.0 screws (2) that
secure the keyboard to the top cover.
5.
Remove the keyboard (3).
Reverse this procedure to install the keyboard.
Rear speakers
Description
Rear speakers (includes left and right rear speakers, cables, and 2 rubber isolators)
Before removing the rear speakers, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the bottom cover (see
components:
a.
Battery (see
b.
Fan (see
c.
System board (see
Bottom cover on page
Battery on page
35)
Fan on page
39)
System board on page
33), and then remove the following
62)
Component replacement procedures
Spare part number
701821-001
71