Table of Contents
Advertisement
8-10 Troubleshooting
Error Messages
If an error occurs in the server, an error message appears on the display unit connected to the server.
POST Error Messages
When POST detects an error, it displays an error message on the display unit screen. In addition,
depending on the error contents, the computer might beep to report that an error occurred.
Messages indicating a memory
error (In this example, the
messages indicate that
CPU1_DIMM1 and
CPU1_DIMM4 have failed and
been disabled, and that
CPU1_DIMM1 have been forcibly
started up.)
The following table lists error messages and actions to take.
IMPORTANT:
your service representative. Alarm messages are useful information for
maintenance.
NOTE:
the server. For details about the BIOS error messages for the SCSI
controller card and RAID controller, which are options connected to the
motherboard, and the actions to take, see the manuals that come with
the options.
:
System Monitoring Check
... Passed
ERROR
AE81: CPU1_DIMM1 with error is enabled.
AE01: CPU1_DIMM1 has been disabled.
AE04: CPU1_DIMM4 has been disabled.
Press <F1> to resume, <F2> to setup
Write down the messages displayed before contacting
The list of POST error messages only contains messages for
Advertisement
Table of Contents
Troubleshooting
