Adding Or Replacing A Drive In The Upgrade Bay; Adding Or Replacing An Optical Drive - HP Computer User Manual
Computer
Hide thumbs
Also See for Computer:
- User manual (60 pages) ,
- Troubleshooting and maintenance manual (22 pages) ,
- User manual (33 pages)
Table of Contents
Advertisement
8.
Insert the battery (see
9.
Connect AC power and external devices to the computer.
10.
Turn on the computer.
Adding or replacing a drive in the upgrade bay
The upgrade bay can hold an optical drive.
Adding or replacing an optical drive
CAUTION:
Shut down the computer before removing the optical drive from the upgrade bay. Do not remove the
optical drive while the computer is on or in the Sleep state.
If you are not sure whether the computer is off, turn the computer on by pressing the power button.
Then shut down the computer through the operating system.
To remove an optical drive or the weight saver from the upgrade bay:
1.
Save your work.
2.
Shut down the computer and close the display.
3.
Disconnect all external hardware devices connected to the computer.
4.
Unplug the power cord from the AC outlet.
5.
Turn the computer upside down on a flat surface, with the upgrade bay toward you.
6.
Remove the battery (see
7.
Remove the service door (see
8.
Loosen the upgrade bay screw (1).
9.
Using a flat-bladed screwdriver, gently push the tab (2) to release the optical drive or weight
saver.
Inserting or removing the battery on page
To prevent information loss or an unresponsive system:
Inserting or removing the battery on page
Removing or replacing the service door on page
34).
34).
45).
Using hard drives
49
Hide quick links:
Advertisement
Table of Contents
