Restoring Factory Settings In Computer Setup - HP Computer User Manual
Computer
Hide thumbs
Also See for Computer:
- User manual (60 pages) ,
- Troubleshooting and maintenance manual (22 pages) ,
- User manual (33 pages)
Table of Contents
Advertisement
To exit Computer Setup menus, choose one of the following methods:
●
To exit Computer Setup menus without saving your changes:
Click the Exit icon in the lower-right corner of the screen, and then follow the on-screen
instructions.
– or –
Use the
enter.
●
To save your changes and exit Computer Setup menus:
Click the Save icon in the lower-right corner of the screen, and then follow the on-screen
instructions.
– or –
Use the
enter.
Your changes go into effect when the computer restarts.
Restoring factory settings in Computer Setup
NOTE:
Restoring defaults will not change the hard drive mode.
To return all settings in Computer Setup to the values that were set at the factory, follow these steps:
1.
Turn on or restart the computer, and then press
Menu" message is displayed at the bottom of the screen.
2.
Press
3.
Use a pointing device or the arrow keys to select Main > Restore Defaults.
4.
Follow the on-screen instructions.
5.
To save your changes and exit, click the Save icon in the lower-right corner of the screen, and
then follow the on-screen instructions.
– or –
Use the arrow keys to select Main > Save Changes and Exit, and then press enter.
Your changes go into effect when the computer restarts.
NOTE:
Your password settings and security settings are not changed when you restore the factory
settings.
62
Chapter 11 Computer Setup (BIOS), MultiBoot, and HP PC Hardware Diagnostics (UEFI)
tab
key and the arrow keys to select Main > Ignore Changes and Exit, and then press
tab
key and the arrow keys to select Main > Save Changes and Exit, and then press
f10
to enter Computer Setup.
esc
while the "Press the ESC key for Startup
Hide quick links:
Advertisement
Table of Contents
