Table of Contents
Advertisement
Troubleshooting
135
15.3.1 MAIN BARRIER
13:1 DRUM POSITIONING TIMED OUT
The error code is shown if input POSITION DRUM 1 and POSITION DRUM 2 is not activated within
set time in Config parameter DRUM POS TIMEOUT.
Recommended actions:
1. Check inputs from positioning sensors DP1 and DP2.
13:2 DRUM UNLOCKING
The error code is shown if input DRUM UNLOCKED is not active or input DRUM LOCKED is
still active after 2,5 seconds.
Recommended actions:
1. Check inputs from indexing sensors FC1 and FC2.
13:3 INNER DOOR OPENING
The error code is shown if input JACK AT HOME is not activated within set time in Config parameter
AUTO INNER DOOR TIME.
Recommended actions:
1. Check input from door jack sensor DP6.
13:4 INNER DOOR JACK POSITION
The error code is shown if input JACK AT HOME is not activated and the reported motor speed
is not zero.
Recommended actions:
1. Check input from door jack sensor DP6.
13:5 DOOR UNLOCKING
The error code is shown if inputs JACK AT HOME does not get inactive.
Recommended actions:
1. Check input from door jack sensor DP6.
13:6 DRUM LOCK POSITION SWITCH
The error code is shown if inputs DRUM UNLOCKED and DRUM LOCKED are both active or
inactive at the same time.
Recommended actions:
1. Check inputs from indexing sensors FC1 and FC2.
13:7 DRUM NOT ROTATING
The error code is shown if positioning sensor on input on J201 is not indicating rotation when
rotation is expected during program run.
Recommended actions:
1. Check that drive belt is not broken.
2. Check positioning sensor on input J201.
- Quick Links:
- Drawing
- Technical Data
- Error Code
Hide quick links:
Advertisement
Table of Contents
