Table of Contents
Advertisement
15.3.3 MAIN DRYER
15:2 DOOR OPEN 2
Only on Pocket washer:
This error code will be shown if the control system detects that the input DOOR CLOSED 2
(unloading side) has been deactivated during an on-going program.
The error can only occur during an on-going program.
Possible causes:
This can be caused by for example a bad or defective door lock, loose cable to door lock, problem
with door lock edge connection, defective input on I/O unit type 10 etc.
Recommended action:
1. Check door lock functionality in service program, but activating door lock and then by checking
inputs.
2. Check electrical connections by reading inputs at the same time as cables carefully
moved/pulled.
3. Carefully knock on the door lock to locate intermittent errors.
15:3 DOOR LOCK FAIL 2
Only on Pocket washer:
This error code will be shown if the control system detects that the input DOOR LOCKED 2 has not
been activated within a certain time after unloading door is closed.
It will also be activated if the input DOOR LOCKED 2 has been deactivated during an on-going
program.
Possible causes:
This can be caused by a mechanical problem preventing door lock to lock, defective door lock,
loose cable connection to door lock, broken cables to door lock or mechanical problem with
emergency opening of the door.
Recommended actions:
1. Check door lock functionality in service program, but activating door lock and then by checking
check inputs.
2. Check electrical connections by reading inputs at the same time as cables carefully
moved/pulled.
3. Carefully knock on the door lock unit to locate intermittent errors.
4. Check DLCU 2 status in service mode for more information on possible causes.
Troubleshooting
139
- Quick Links:
- Drawing
- Technical Data
- Error Code
Hide quick links:
Advertisement
Table of Contents
