Table of Contents
Advertisement
Notes:
1. Turn on all external devices, such as the monitor, before you turn on the
2. The power-on LED on the front of the computer is lit when the computer is on
Approximately 20 seconds after the computer is connected to ac power, the
power-control button becomes active, and you can turn on the computer and start
the operating system by pressing the power-control button. The computer can also
be turned on any of the following ways:
v If a power failure occurs while the computer is turned on, the computer will
v When you connect the computer to power for the first time, the Wake on LAN
Running the operating-system setup program
If you are starting the computer for the first time, the setup program runs
automatically when you start the computer. The program prompts you to make
choices or type information. If you need more information than is provided in this
Installation Guide, see the operating-system documentation.
Important:
1. After turning on the computer for the first time, you must complete the
2. The setup program might be slightly different from the one that is described in
3. During the setup procedure, you must indicate that you accept the license
4. For Windows operating systems, the registration information is already
You will need the following information to complete the setup program in a Windows
operating system:
v The documentation that comes with the computer.
v Network information from your network administrator, if the computer is being
v The printer model and port, if a printer is attached directly to the computer.
After the setup procedure is completed and the computer restarts, the desktop
opens, and the computer is ready for use.
Turning off the computer
When you turn off the computer and leave it connected to ac power, the computer
can respond to requests, such as a remote request to turn on the computer. To
remove all power from the computer, you must disconnect it from the power source.
12
IBM IntelliStation M Pro Type 9229: Installation Guide
computer.
and while it is being turned on.
restart automatically when power is restored.
feature can turn on the computer. If the computer was previously turned on, it
must be properly turned off for the Wake on LAN feature to turn on the computer.
operating-system setup procedure before you turn off the computer; otherwise,
unexpected results might occur.
the operating-system documentation. Some choices are not available because
they are preset.
agreement.
displayed in the registration field. If the product ID number is not already
displayed, you must type it. The product ID is on a label that is attached to the
computer.
connected to a network.
®
- Quick Links:
- Installation Guide
Hide quick links:
Advertisement
Table of Contents
