Table of Contents
Advertisement
Recording
information on your
location
The camcorder records information on
the location when movies or photos are
recorded (the default setting).
GPS triangulating status
Searching for the
Triangulating
Triangulating meters
Images will be registered using
the location information that was
previously obtained.
GB
(GPS)
satellites
Number of dots
changes
Unable to
triangulate
Unable to record
location information
If you do not want to record location
information
[Setup]
Select
General Settings] [GPS
[
Setting] [Off ].
Notes
It may take a while before the camcorder starts
triangulating.
Use the GPS function outdoors and in open
areas, as the radio signals can best be received
in such areas.
If data on your current location
cannot be obtained
A display that allows you to triangulate the
location again appears. In this case, follow
the instructions that appears on the LCD
screen.
Hints for better reception
Use the GPS function outdoors and in open
areas.
For details on locations or situations where
radio signals cannot be received, refer to
page 103.
Rotate the LCD panel to direct the GPS antenna
(p. 7) towards the sky. Do not place your hand
on the GPS antenna.
Advertisement
Chapters
Table of Contents
