Table of Contents
Advertisement
16
EN
LENS COVER Open/Close Ring
Recording Start/Stop Button
2 5M I N
MIN
120MIN
(Now calculating)
0MIN
1MIN
(Blinking)
(Blinking)
90
180
Select Wheel (BRIGHT)
–
– – – – –
– – – – –
BR I GHT
6
To Adjust The Brightness Of The LCD Monitor
.... rotate the Select Wheel (BRIGHT) until the
bright level indicator on the display moves
and the appropriate brightness is reached.
AUTO : Suitable for standard recording using NO special effects or manual adjustments.
PRO. : Allows you to set recording functions using the menus for more creative capabilities.
OFF
: Switches off the camcorder.
PLAY : Allows you to play back your recordings.
Power Switch
Tape remaining time
indicator
(Approximate)
119MIN
2MIN
3MIN
(Blinking)
DISPLAY Button
+
Power Switch Position
RECORDING
NOTE:
You should already have performed the procedures listed
below. If not, do so before continuing.
Power (
pg. 8)
Recording Mode Setting (
Load A Cassette (
Grip Adjustment (
Viewfinder Adjustment (
Shooting While Watching The
Viewfinder
1
Make sure the LCD monitor is closed and locked.
Turn the LENS COVER Open/Close Ring to open the
lens cover. Set the Power Switch to "CAMERA"
("AUTO" or "PRO."). The power lamp lights and the
camcorder enters the Record-Standby mode.
"PAUSE" is displayed in the viewfinder.
2
Press the Recording Start/Stop Button. "
in the viewfinder while recording is in progress.
Shooting While Watching The
LCD Monitor
1
Make sure the LCD monitor is fully open. Turn the
LENS COVER Open/Close Ring to open the lens
cover. Set the Power Switch to "CAMERA" ("AUTO"
or "PRO."). The power lamp lights and the
camcorder enters the Record-Standby mode.
"PAUSE" is displayed in the LCD monitor.
2
Tilt the LCD monitor upward/downward for best
viewability and press the Recording Start/Stop Button.
"
" appears in the LCD monitor while recording is
in progress.
NOTE:
When you use the LCD monitor outdoors in direct
sunlight, the LCD monitor may be difficult to see. If this
happens, use the viewfinder instead.
To Stop Recording . . .
.... press the Recording Start/Stop Button. The camcorder
re-enters the Record-Standby mode.
Basic Recording
pg. 12)
pg. 10)
pg. 15)
pg. 15)
" appears
Hide quick links:
Advertisement
Table of Contents
