Sanyo PLC-XP51 Service Manual page 11
Hide thumbs
Also See for PLC-XP51:
- Owner's manual (56 pages) ,
- Specifications (1 page) ,
- Brochure (2 pages)
Table of Contents
Advertisement
Electrical Adjustments
,
PC gain adjustment
1. Receive the 16-step gray scale computer signal with
Input 1 [RGB(Analog)] mode.
2. Enter the service mode.
3. Connect an oscilloscope to test point "
and chassis ground (-).
4
4. Select group no. "
", item no. "
value to adjust waveform "a" to be minimum ampli-
tude.
5. Connect an oscilloscope to test point "
and chassis ground (-).
4
6. Select item no. "
" and change data value to adjust
waveform "a" to be minimum amplitude.
7. Connect an oscilloscope to test point "
and chassis ground (-).
5
8. Select item no. "
" and change data value to adjust
waveform "a" to be minimum amplitude.
White Level
(a)
.
PC signal offset adjustment
1. Receive the 16-step gray scale computer signal with
Input 1 [RGB(Analog)] mode.
2. Enter the service mode.
3. Connect an oscilloscope to test point "
and chassis ground (-).
4
4. Select group no. "
", item no. "
1.5
amplitude "a" to be
value.
white level
(a)
TP35G
3
" and change data
TP35B
TP35R
TP35G
" (+)
6
" and adjust the
±0.1V by changing the Data
white level
⁄0
Video A/D reference voltage (bottom
side) adjustment
1. Receive the 16-step gray scale composite video sig-
nal with Input 3 [Video] mode.
" (+)
2. Enter the service mode.
3. Connect a digital voltmeter to test point "
and chassis ground (-).
4. Select group no. "
value to adjust the voltage to be
" (+)
⁄1
" (+)
Video Y pedestal adjustment
1. Receive the black 0% composite video signal with
Input 3 [Video] mode.
2. Enter the service mode.
3. Select group no. "
value to adjust the green noise on the screen to the
deepest green.
⁄2
Video A/D reference voltage (top
side) adjustment
1. Receive the white 100% composite video signal with
Input 3 [Video] mode.
2. Enter the service mode.
3. Select group no. "
value to adjust the magenta noise on the screen to
the deepest magenta.
⁄3
Video Cb/Cr pedestal adjustment
1. Receive the black 0% composite video signal with
Input 3 [Video] mode.
2. Enter the service mode.
3. Select group no. "
value to adjust the blue noise on the screen to the
deepest blue.
4. Select group no. "
value to adjust the red noise on the screen to the
deepest red.
-11-
TPVRB
5
17
", item no. "
" and change data
0.70
±0.02Vdc.
5
11
", item no. "
" and change data
5
18
", item no. "
" and change data
5
12
", item no. "
" and change data
5
13
", item no. "
" and change data
" (+)
- Quick Links:
- Lamp Replacement
Hide quick links:
Advertisement
Table of Contents
