Features And Requirements - HP XP48 Configuration Manual

Storageworks disk array xp

Hide thumbs Also See for XP48:

Table of Contents

Features and requirements

The disk array has the following features:

• Storage capacity. The storage capacity for each model is listed below:

XP48: Up to 48 drives from 72 GB to 8.7 TB, 24 FC ports

XP128: From 8 to 128 drives for up to 18 TB, 48 FC ports

XP512: Up to 512 drives from 72 GB to 93 TB, 48 FC ports

XP1024: From 8 to 1024 drives for up to 149 TB, 64 FC ports

XP12000: Up to 1152 drives for up to 165 TB, 128 FC ports

• Server support. SGI ORIGIN 2000 system(s)

• Operating system support. SGI IRIX operating system 6.5 or higher

with current patches.

Before installing the disk array, ensure the environment conforms to these

requirements:

• Host Bus Adapters (HBAs). Install HBAs and all utilities and

drivers. Refer to the adapter documentation for installation details.

• (Recommended) HP StorageWorks Command View XP with LUN

management feature or Remote Control with the LUN Configuration

Manager XP option. These are used to configure disk array ports and

paths.

• (Recommended) HP StorageWorks Secure Manager XP. Allows the

host to access only authorized array devices.

• (Optional) Other available XP software (some may not be supported

by your system):

HP StorageWorks Business Copy XP

HP StorageWorks Continuous Access XP

HP StorageWorks Continuous Access Extension XP

HP StorageWorks Auto LUN XP

HP StorageWorks Data Exchange XP

HP StorageWorks Resource Manager XP

HP StorageWorks RAID Manager XP

HP StorageWorks Cache LUN XP

HP StorageWorks Disk Array XP Operating System Configuration Guide: SGI IRIX

Table of Contents

Xp128 Xp512 Xp1024 Xp12000