Create Emulex Hba Driver Diskette; Extract Emulex Drivers; Extract Emulex Drivers - Install - IBM DS3000 Introduction And Implementation Manual

System storage

Hide thumbs Also See for DS3000:

Table of Contents

7065FC_Config1.fm

19.4.1 Create Emulex HBA driver diskette

First we have to create a driver diskette for the Emulex HBA - you can do this on another

server running Windows 2003.

1. Download the Emulex HBA driver kit from the IBM Support site.

http://www-1.ibm.com/servers/storage/support/disk

2. Start the downloaded exe file to extract the drivers (Figure 19-22). Click Next.

Figure 19-22 Extract Emulex Drivers

3. Check the directory and click Install (Figure 19-23) to extract the files.

Figure 19-23 Extract Emulex Drivers - Install

4. When the installation is complete, (Figure 19-24 on page 455), uncheck Start Auto Pilot

Installer and click Finish.

IBM System Storage DS3000: Introduction and Implementation Guide

Draft Document for Review August 30, 2007 12:59 am

Show Quick Links

Table of Contents