hit counter script
Lenovo E200 Hardware Maintenance Manual
  1. Manuals
  2. Brands
  3. Lenovo Manuals
  4. Desktop
  5. E200
  6. Hardware maintenance manual
Lenovo E200 Hardware Maintenance Manual

Lenovo E200 Hardware Maintenance Manual

E series
Hide thumbs Also See for E200:
Table of Contents

Advertisement

Quick Links

Advertisement

Table of Contents
loading

Related Manuals for Lenovo E200

Summary of Contents for Lenovo E200

  • Page 3 Lenovo E200 Hardware Maintenance Manual...
  • Page 4 Portions © Copyright International Business Machines Corporation 2005. All rights reserved. LENOVO products, data, computer software, and services have been developed exclusively at private expense and are sold to governmental entities as commercial items as defined by 48 C.F.R. 2.101 with limited and restricted rights to use, reproduction and disclosure.

  • Page 5: Table Of Contents

    Exiting from the Setup Utility program . Chapter 7. Symptom-to-FRU Index . . . 53 Hard disk drive boot error . Power Supply Problems . © Lenovo 2005, 2008. Portions © IBM Corp. 2005. Diagnostic error codes . POST error codes . Miscellaneous error messages .
  • Page 6 Lenovo E200 Hardware Maintenance Manual...

  • Page 7: Chapter 1. About This Manual

    It is intended only for trained servicers who are familiar with Lenovo computer products. Before servicing a Lenovo product, be sure to read the Safety Information. See Chapter 2, “Safety information,” on page 5. The Symptom-to-FRU Index and Additional Service Information chapters are not specific to any machine type and are applicable to all Lenovo computers.

  • Page 8: Important Information About Replacing Rohs Compliant Frus

    Lenovo plans to transition to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule. Products sold in 2005, will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant parts.

  • Page 9: Turkish Statement Of Compliance

    Turkish statement of compliance The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment (EEE). Lenovo ürünü Turkiye cumhuriyeti'nin Elektrikli ve elektronik e yalardaki zararli madde kullaniminin sinirlandirilmasi ş...
  • Page 10 Lenovo E200 Hardware Maintenance Manual...

  • Page 11: Chapter 2. Safety Information

    After service, reinstall all safety shields, guards, labels, and ground wires. Replace any safety device that is worn or defective. v Reinstall all covers correctly before returning the machine to the customer. Electrical safety © Lenovo 2005, 2008. Portions © IBM Corp. 2005.
  • Page 12 Never assume that power has been disconnected from a circuit. First, check that it has been powered-off. Lenovo E200 Hardware Maintenance Manual handles covered with a soft material that does not insulate you when working with live electrical currents.

  • Page 13: Safety Inspection Guide

    v Always look carefully for possible hazards in your work area. Examples of these hazards are moist floors, nongrounded power extension cables, power surges, and missing safety grounds. v Do not touch live electrical circuits with the reflective surface of a plastic dental mirror.

  • Page 14: Handling Electrostatic Discharge-Sensitive Devices

    – Use the round ground-prong of the ac plug on ac-operated computers. Grounding requirements Electrical grounding of the computer is required for operator safety and correct system function. Proper grounding of the electrical outlet can be verified by a certified electrician. Lenovo E200 Hardware Maintenance Manual...

  • Page 15: Safety Notices (Multi-Lingual Translations)

    Safety notices (multi-lingual translations) The caution and danger safety notices in this section are provided in the following languages: v English v Arabic v Brazilian/Portuguese v Chinese (simplified) v Chinese (traditional) v French v German v Hebrew v Italian v Korean v Spanish DANGER Electrical current from power, telephone and communication cables is hazardous.
  • Page 16 ≥18 kg (37 lbs) CAUTION: Use safe practices when lifting. Lenovo E200 Hardware Maintenance Manual diode. Note the following: Laser radiation when open. Do not stare into the beam, do not view directly with optical instruments, and avoid direct exposure to the beam.
  • Page 17 CAUTION: The power control button on the device and the power switch on the power supply do not turn off the electrical current supplied to the device. The device also might have more than one power cord. To remove all electrical current from the device, ensure that all power cords are disconnected from the power source.
  • Page 18 Lenovo E200 Hardware Maintenance Manual...
  • Page 19 Chapter 2. Safety information...
  • Page 20 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) Lenovo E200 Hardware Maintenance Manual...
  • Page 21 PERIGO A corrente elétrica proveniente de cabos de alimentação, de telefone e de comunicações é perigosa. Para evitar risco de choque elétrico: v Não conecte nem desconecte nenhum cabo ou execute instalação, manutenção ou reconfiguração deste produto durante uma tempestade com raios. v Conecte todos os cabos de alimentação a tomadas elétricas corretamente instaladas e aterradas.
  • Page 22 Radiação a laser quando aberto. Não olhe diretamente para o feixe a olho nu ou com instrumentos ópticos e evite exposição direta ao feixe. ≥18 kg (37 lbs) CUIDADO: Utilize procedimentos de segurança para levantar equipamentos. Lenovo E200 Hardware Maintenance Manual ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs)
  • Page 23 CUIDADO: O botão de controle de alimentação do dispositivo e o botão para ligar/desligar da fonte de alimentação não desligam a corrente elétrica fornecida ao dispositivo. O dispositivo também pode ter mais de um cabo de alimentação. Para remover toda a corrente elétrica do dispositivo, assegure que todos os cabos de alimentação estejam desconectados da fonte de alimentação.
  • Page 24 Lenovo E200 Hardware Maintenance Manual...
  • Page 25 Chapter 2. Safety information...
  • Page 26 Lenovo E200 Hardware Maintenance Manual...
  • Page 27 Chapter 2. Safety information...
  • Page 28 3. Branchez les câbles d’interface sur des connecteurs. 4. Branchez les cordons d’alimentation sur des prises. 5. Mettez les unités SOUS TENSION. Lenovo E200 Hardware Maintenance Manual Déconnexion 1. Mettez les unités HORS TENSION. 2. Débranchez les cordons d’alimentation des prises.
  • Page 29 ATTENTION: Remplacer la pile au lithium usagée par une pile de référence identique exclusivement, (référence 33F8354), ou suivre les instructions du fabricant qui en définit les équivalences. Si votre système est doté d’un module contenant une pile au lithium, vous devez le remplacer uniquement par un module identique, produit par le même fabricant.
  • Page 30 L’interrupteur de contrôle d’alimentation de l’unité et l’interrupteur dubloc d’alimentation ne coupent pas le courant électrique alimentantl’unité. En outre, le système peut être équipé de plusieurs cordonsd’alimentation. Pour mettre l’unité hors tension, vous devez déconnectertous les cordons de la source d’alimentation. Lenovo E200 Hardware Maintenance Manual...
  • Page 31 VORSICHT An Netz-, Telefon- und Datenleitungen können gefährliche Spannungen anliegen. Aus Sicherheitsgründen: v Bei Gewitter an diesem Gerät keine Kabel anschließen oder lösen. Ferner keine Installations-, Wartungs- oder Rekonfigurationsarbeiten durchführen. v Gerät nur an eine Schutzkontaktsteckdose mit ordnungsgemäß geerdetem Schutzkontakt anschließen. v Alle angeschlossenen Geräte ebenfalls an Schutzkontaktsteckdosen mit ordnungsgemäß...
  • Page 32 Laserstrahlung auftreten. VORSICHT Einige Lasergeräte enthalten eine Laserdiode der Klasse 3A oder 3B. Beachten Sie Folgendes: Laserstrahlung bei geöffneter Verkleidung. Nicht in den Strahl blicken. Keine Lupen oder Spiegel verwenden. Strahlungsbereich meiden. Lenovo E200 Hardware Maintenance Manual...
  • Page 33 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) ACHTUNG: Arbeitsschutzrichtlinien beim Anheben der Maschine beachten. ACHTUNG: Mit dem Netzschalter an der Einheit und am Netzteil wird die Stromversorgung für die Einheit nicht unterbrochen. Die Einheit kann auch mit mehreren Netzkabeln ausgestattet sein.
  • Page 34 Lenovo E200 Hardware Maintenance Manual...
  • Page 35 Chapter 2. Safety information...
  • Page 36 Lenovo E200 Hardware Maintenance Manual...
  • Page 37 PERICOLO La corrente elettrica proveniente dai cavi di alimentazione, del telefono e di comunicazione può essere pericolosa. Per evitare il rischio di scosse elettriche: v Non collegare o scollegare qualsiasi cavo oppure effettuare l’installazione, la manutenzione o la riconfigurazione del prodotto durante un temporale. v Collegare tutti i fili elettrici a una presa di alimentazione correttamente cablata e dotata di messa a terra.
  • Page 38 Alcune unità laser contengono un diodo laser di Classe 3A o Classe 3B. Tener presente quanto segue: Aprendo l’unità vengono emesse radiazioni laser. Non fissare il fascio, non guardarlo direttamente con strumenti ottici ed evitare l’esposizione al fascio. Lenovo E200 Hardware Maintenance Manual...
  • Page 39 ≥18 kg (37 lbs) ≥32 kg (70.5 lbs) ≥55 kg (121.2 lbs) ATTENZIONE: Prestare attenzione nel sollevare l’apparecchiatura. ATTENZIONE: Il pulsante di controllo dell’alimentazione presente sull’unità e l’interruttore dell’alimentatore non disattivano l’alimentazione corrente fornita all’unità. E’ possibile che l’unità disponga di più cavi di alimentazione. Per disattivare l’alimentazione dall’unità, accertarsi che tutti i cavi di alimentazione siano scollegati dalla fonte di alimentazione.
  • Page 40 Lenovo E200 Hardware Maintenance Manual...
  • Page 41 Chapter 2. Safety information...
  • Page 42 4. Enchufe los cables de alimentación a las tomas de corriente. 5. Encienda el dispositivo. Lenovo E200 Hardware Maintenance Manual Para desconectar 1. APÁGUELO todo. 2. En primer lugar, desenchufe los cables de alimentación de las tomas de corriente.
  • Page 43 PRECAUCIÓN: Cuando sustituya una batería de litio, utilice solamente una batería número de pieza 33F8354 u otra de tipo equivalente recomendada por el fabricante. Si su sistema dispone de un módulo que contiene una batería de litio, reemplácelo sólo con el mismo tipo de módulo, del mismo fabricante. La batería contiene litio y puede explotar si no se utiliza, manipula o desecha correctamente.
  • Page 44 Además, el dispositivo podría tener más de un cable de alimentación. Para suprimir toda la corriente eléctrica del dispositivo, asegúrese de que todos los cables de alimentación estén desconectados de la toma de corriente. Lenovo E200 Hardware Maintenance Manual...

  • Page 45: Chapter 3. General Information

    CRU removal and installation instructions v Publications v Troubleshooting information v Parts information v Downloads and drivers v Links to other useful sources of information To access this information, point your browser to http://www.lenovo.com/ support/. © Lenovo 2005, 2008. Portions © IBM Corp. 2005.

  • Page 46: Specifications

    High range: Minimum: 200 V AC Maximum: 240 V AC Input frequency range: 50/60 Hz Voltage-selection switch setting: 230 V AC Input kilovolt-amperes (kVA) (approximate): Minimum configuration as shipped: 0.180 kVA Maximum configuration: 0.210 kVA Lenovo E200 Hardware Maintenance Manual...

  • Page 47: Chapter 4. General Checkout

    Support and Engineering functions. v Machine type and model v Processor or hard disk upgrades v Failure symptom – Do diagnostics indicate a failure? – What, when, where, single, or multiple systems? © Lenovo 2005, 2008. Portions © IBM Corp. 2005.
  • Page 48 7. Have the same configuration options set in the system 8. Have the same setup for the operating system control files Comparing the configuration and software set-up between “working and non-working” systems will often lead to problem resolution. Lenovo E200 Hardware Maintenance Manual...

  • Page 49: Chapter 5. Diagnostics

    Lenovo troubleshooting center, update system drivers, and review system information. To run the Lenovo System Toolbox, click Start → All Programs → Lenovo Services → Lenovo System Toolbox. Follow the instructions on the screen. For additional information about running the diagnostic program, refer to the Lenovo System Toolbox help system.

  • Page 50: Creating A Diagnostic Cd/Dvd Image

    2. Using the cursor movement keys, highlight the desired test. 3. Press the space bar. Lenovo E200 Hardware Maintenance Manual drive set as a startable device. See “Selecting a startup device” on page 51 for instructions on how to change the startup device.

  • Page 51: Test Results

    A selected test is marked by >>. Pressing the space bar again de-selects a test and removes the >>. 4. Repeat steps 2 and 3 above to select all desired tests. Test results Diagnostics test results produce the following error code format: Function Code v Function Code:...
  • Page 52 Most of the tests found in FDAT are non-destructive. This means that PC-Doctor program will preserve any data that is present on the tested media prior to beginning any destructive operations (such as write operations). However, users Lenovo E200 Hardware Maintenance Manual...

  • Page 53: Quick And Full Erase - Hard Drive

    can run certain tests in destructive mode (i.e. surface scan tests). Destructive tests will speed up testing because FDAT does not preserve the data on the media prior to the test beginning. Unlike non-destructive tests, any data present on the media prior to the test beginning is lost.
  • Page 54 Lenovo E200 Hardware Maintenance Manual...

  • Page 55: Chapter 6. Using The Setup Utility

    You do not have to set any passwords to use your computer. However, if you decide to set any passwords, read the following sections. © Lenovo 2005, 2008. Portions © IBM Corp. 2005. Utility program menu is not displayed until you type your password.

  • Page 56: Password Considerations

    1. Start the Setup Utility program. See Chapter 6, “Using the Setup Utility,” on page 49. 2. From the Setup Utility program, select the Security tab and then select Set administrator password or Set Power-On Password. Read the information displayed on the right side of the screen. Lenovo E200 Hardware Maintenance Manual...

  • Page 57: Selecting A Startup Device

    Selecting a startup device If your computer does not start up from a device such as the disc, diskette, or hard disk drive as expected, use one of the following procedures to select a startup device. Selecting a temporary startup device Use this procedure to start up from any start device.
  • Page 58 Lenovo E200 Hardware Maintenance Manual...

  • Page 59: Chapter 7. Symptom-To-Fru Index

    System Board Power Supply connectors v Microprocessor(s) connection Check the power cord for continuity. Check the power-on switch for continuity. © Lenovo 2005, 2008. Portions © IBM Corp. 2005. FRU/Action Check the configuration and ensure the start-up drive is in the boot sequence.

  • Page 60: Diagnostic Error Codes

    000-038-XXX BIOS Extension failure 000-039-XXX BIOS DMI data error 000-195-XXX BIOS Test aborted by user Lenovo E200 Hardware Maintenance Manual FRU/Action No action 1. Flash the system. See “Flash update procedures” on page 111 2. System board 1. Flash the system. See “Flash update procedures”...
  • Page 61 Diagnostic Error Code 000-196-XXX BIOS test halt, error threshold exceeded 000-197-XXX BIOS test warning 000-198-XXX BIOS test aborted 000-199-XXX BIOS test failed, cause unknown 000-250-XXX BIOS APM failure 000-270-XXX BIOS ACPI failure 001-000-XXX System Test Passed 001-00X-XXX System Error 001-01X-XXX System Error 001-024-XXX System Addressing test failure...
  • Page 62 001-198-XXX System test aborted 001-199-XXX System test failed, cause unknown 001-250-XXX System ECC error Lenovo E200 Hardware Maintenance Manual FRU/Action System board 1. Reboot the system 2. Flash the system. See “Flash update procedures” on page 111 3. Run memory test 4.
  • Page 63 Diagnostic Error Code 001-254-XXX 001-255-XXX 001-256-XXX 001-257-XXX System DMA error 001-260-XXX 001-264-XXX System IRQ error 001-268-XXX System IRQ1 failure 001-269-XXX System IRQ2 failure 001-270-XXX System IRQ3 failure 001-271-XXX System IRQ4 failure 001-272-XXX System IRQ5 failure 001-273-XXX System IRQ6 (diskette drive) failure 001-274-XXX System IRQ7 failure 001-275-XXX...
  • Page 64 Video Checksum Value error 005-027-XXX Video Configuration/Setup error 005-031-XXX Video Device Cable failure 005-032-XXX Video Device Controller failure Lenovo E200 Hardware Maintenance Manual FRU/Action System board 1. Run Setup and re-test 2. System board 1. CMOS Battery 2. System board 1.
  • Page 65 Diagnostic Error Code 005-036-XXX Video Register error 005-038-XXX System BIOS extension failure 005-040-XXX Video IRQ failure 005-195-XXX Video Test aborted by user 005-196-XXX Video test halt, error threshold exceeded 005-197-XXX Video test warning 005-198-XXX Video test aborted 005-199-XXX Video test failed, cause unknown 005-2XX-XXX 005-3XX-XXX Video subsystem error...
  • Page 66 Serial port failure 011-195-XXX Serial port Test aborted by user 011-196-XXX Serial port test halt, error threshold exceeded Lenovo E200 Hardware Maintenance Manual FRU/Action 1. If a component is called out, make sure it is connected and/or enabled 2. Re-run test 3.
  • Page 67 Diagnostic Error Code 011-197-XXX Serial port test warning 011-198-XXX Serial port test aborted 011-199-XXX Serial port test failed, cause unknown 011-2XX-XXX Serial port signal failure 014-000-XXX Parallel port Interface Test Passed 014-001-XXX Parallel port Presence 014-002-XXX 014-003-XXX Parallel port Timeout/Parity error 014-013-XXX 014-014-XXX Parallel port Control Signal/Loopback test...
  • Page 68 USB port buffer allocation failure 015-035-XXX USB port Reset condition detected Lenovo E200 Hardware Maintenance Manual FRU/Action 1. Press F3 to review the log file 2. Re-start the test to reset the log file 1. Make sure the component that is called out is connected and/or enabled.
  • Page 69 Diagnostic Error Code 015-036-XXX USB port Register error 015-040-XXX USB port IRQ failure 015-195-XXX USB port Test aborted by user 015-196-XXX USB port test halt, error threshold exceeded 015-197-XXX USB port test warning 015-198-XXX USB port test aborted 015-199-XXX USB port test failed, cause unknown 018-000-XXX PCI Card Test Passed 018-0XX-XXX...
  • Page 70 PCI Test aborted by user 020-196-XXX PCI test halt, error threshold exceeded 020-197-XXX PCI test warning Lenovo E200 Hardware Maintenance Manual FRU/Action 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 49 2.
  • Page 71 Diagnostic Error Code 020-198-XXX PCI test aborted 020-199-XXX PCI test failed, cause unknown 020-262-XXX PCI system error 025-000-XXX IDE interface Test Passed 025-00X-XXX 025-01X-XXX IDE interface failure 025-027-XXX IDE interface Configuration/Setup error 025-02X-XXX 025-03X-XXX 025-04X-XXX IDE Interface failure 025-195-XXX IDE interface Test aborted by user 025-196-XXX IDE interface test halt, error threshold exceeded...
  • Page 72 SCSI interface test halt, error threshold exceeded 030-197-XXX SCSI interface test warning Lenovo E200 Hardware Maintenance Manual FRU/Action 1. If a component is called out, make sure it is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 49 2.
  • Page 73 Diagnostic Error Code 030-198-XXX SCSI interface test aborted 030-199-XXX SCSI interface test failed, cause unknown 035-000-XXX RAID interface Test Passed 035-0XX-XXX RAID interface Failure 035-195-XXX RAID interface Test aborted by user 035-196-XXX RAID interface test halt, error threshold exceeded 035-197-XXX RAID interface test warning 035-198-XXX RAID interface test aborted...
  • Page 74 Game Port interface Test Passed 080-XXX-XXX Game Port interface Error 080-195-XXX Game Port interface Test aborted by user Lenovo E200 Hardware Maintenance Manual FRU/Action 1. Run Setup 2. Flash the system. See “Flash update procedures” on page 111 3. System board 1.
  • Page 75 Diagnostic Error Code 080-196-XXX Game Port interface test halt, error threshold exceeded 080-197-XXX Game Port interface test warning 080-198-XXX Game Port interface test aborted 080-199-XXX Game Port interface test failed, cause unknown 086-000-XXX Mouse Port interface Test Passed 086-001-XXX Mouse Port interface Presence 086-032-XXX Mouse Port interface Device controller failure...
  • Page 76 Microprocessor test aborted 089-199-XXX Microprocessor test failed, cause unknown 170-000-XXX Voltage Sensor(s) Test Passed Lenovo E200 Hardware Maintenance Manual FRU/Action 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 49 2.
  • Page 77 Diagnostic Error Code 170-0XX-XXX Voltage Sensor(s) failure 170-195-XXX Voltage Sensor(s) Test aborted by user 170-196-XXX Voltage Sensor(s) test halt, error threshold exceeded 170-197-XXX Voltage Sensor(s) test warning 170-198-XXX Voltage Sensor(s) test aborted 170-199-XXX Voltage Sensor(s) test failed, cause unknown 170-250-XXX 170-251-XXX Voltage Sensor(s) Voltage limit error 170-254-XXX...
  • Page 78 System Cache error 206-000-XXX Diskette Drive Test Passed 206-XXX-XXX Diskette Drive error Lenovo E200 Hardware Maintenance Manual FRU/Action 1. Make sure the component that is called out is connected and/or enabled. See Chapter 6, “Using the Setup Utility,” on page 49 2.
  • Page 79 Diagnostic Error Code 215-000-XXX CD-ROM Drive Test Passed 215-XXX-XXX CD-ROM Drive error 217-000-XXX Hard Disk Drive Test Passed 217-25X-XXX 217-26X-XXX Hard Disk Drive (IDE) error 217-28X-XXX 217-29X-XXX Hard Disk Drive (SCSI) error 220-000-XXX Hi-Capacity Cartridge Drive Test Passed 220-XXX-XXX Hi-Capacity Cartridge Drive error 301-XXX-XXX Keyboard error 301-000-XXX...
  • Page 80 Diagnostic Error Code 415-000-XXX Modem Test Passed 415-XXX-XXX Modem error Lenovo E200 Hardware Maintenance Manual FRU/Action No action Remove the Modem and re-test the system...

  • Page 81: Post Error Codes

    POST error codes Each time you power-on the system, it performs a series of tests that check the operation of the system and some options. This series of tests is called the Power-On Self-Test, or POST. POST does the following operations. v Checks some basic system-board operations v Checks the memory operation v Starts the video operation...
  • Page 82 POST Error Message Press TAB to show POST screen Error: Non-System disk or disk error Replace and press any key when ready Lenovo E200 Hardware Maintenance Manual Description/Action Pressing the TAB key permits the user to toggle between the default POST display screen and a custom POST display screen.

  • Page 83: Miscellaneous Error Messages

    Miscellaneous error messages Message/Symptom Changing display colors Computer will not power-off. See “Power Supply Problems” on page 53. Computer will not RPL from server Computer will not perform a Wake on LAN (if applicable) Dead computer. See “Power Supply Problems” on page 53. Diskette drive in-use light remains on or does not light when drive is active.

  • Page 84: Undetermined Problems

    1. Power-off the computer. 2. Remove or disconnect the following components (if installed) one at a time. a. External devices (modem, printer, or mouse) b. Any adapters Lenovo E200 Hardware Maintenance Manual FRU/Action 1. Diskette Drive 2. System Board 3. Diskette Drive Cable 1.
  • Page 85 c. Memory modules d. Extended video memory e. External Cache f. External Cache RAM g. Hard disk drive h. Diskette drive 3. Power-on the computer to re-test the system. 4. Repeat steps 1 through 3 until you find the failing device or adapter. If all devices and adapters have been removed, and the problem continues, replace the system board.
  • Page 86 Lenovo E200 Hardware Maintenance Manual...

  • Page 87: Chapter 8. Replacing Frus (Type 7848)

    This chapter does not contain a remove and replace procedure for all FRUs. Only the major FRUs are documented. Note: The computer might look slightly different than the illustrations in this chapter. © Lenovo 2005, 2008. Portions © IBM Corp. 2005.

  • Page 88: Locating The Connectors On The Rear Of Your Computer

    4 Standard mouse connector 5 Serial port 6 Parallel port 7 VGA monitor connector 8 USB connectors (4) Lenovo E200 Hardware Maintenance Manual 9 Ethernet connector 10 Microphone connector 11 Audio line-out connector 12 Audio line-in connector 13 PCI Express x1 graphics adapter card slot...

  • Page 89: Locating The Connectors On The Front Of Your Computer

    Locating the connectors on the front of your computer The following illustration shows the location of connectors on the front of the computer. 1 USB connector 2 Headphone connector 3 Microphone connector 4 USB connector 5 xD (extreme Digital) card slot 6 CF (CompactFlash) card slot 7 SD (Secure Digital) card slot 8 MS (Memory Stick) slot...

  • Page 90: Locations

    Locations The following illustration will help you locate the major FRUs in the computer. Microprocessor Heat sink and fan Memory modules Power switch Media Card Reader Lenovo E200 Hardware Maintenance Manual Hard disk drive System board Optical drive Power supply...

  • Page 91: Identifying Parts On The System Board

    Identifying parts on the system board 1 12 V power connector 2 Microprocessor and heat sink 3 Microprocessor fan connector 4 Memory slots (2) 5 Serial connector 6 Diskette drive connector 7 IDE connector 8 24-pin power connector 9 Front panel connector 10 SATA connectors (4) 11 Clear CMOS (Complementary Metal Oxide Semiconductor)/Recovery jumper...

  • Page 92: Removing The Computer Cover

    Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the Lenovo 3000 Safety and Warranty Guide that came with your computer. To obtain a copy of the Lenovo 3000 Safety and Warranty Guide, go to: http://www.lenovo.com/support...
  • Page 93 4. Remove the two screws that secure the computer cover and then slide the cover to the rear to remove. Chapter 8. Replacing FRUs (Type 7848)

  • Page 94: Removing And Replacing The Front Bezel

    3. To reinstall the bezel, align the plastic tabs on the bottom of the bezel with the corresponding holes in the chassis, and then snap it into position at the bottom and top of the chassis. 4. Go to “Completing the FRU replacement” on page 107. Lenovo E200 Hardware Maintenance Manual...

  • Page 95: Installing Or Replacing A Memory Module

    Do not open your computer or attempt any repair before reading and understanding the “Important safety information” in the Lenovo 3000 Safety and Warranty Guide that came with your computer. To obtain a copy of the Lenovo 3000 Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to install or replace a memory module.
  • Page 96 4. Open the retaining clips as shown. If you are replacing an old memory module, open the retaining clips and remove the memory module being replaced as shown. Lenovo E200 Hardware Maintenance Manual...
  • Page 97 5. Position the new memory module over the memory slot. Make sure the notch 1 on the memory module aligns correctly with the slot key 2 on the system board. Push the memory module straight down into the slot until the retaining clips close.

  • Page 98: Replacing A Pci Adapter Card

    1. Remove the cover. See “Removing the computer cover” on page 86. 2. Remove the adapter connector cover for the appropriate expansion connector. 3. If replacing, remove the screw securing the adapter in the connector, and remove the adapter being replaced. Lenovo E200 Hardware Maintenance Manual...
  • Page 99 4. Remove the new adapter from its static-protective package. 5. Install the adapter into the appropriate connector on the system board. 6. Secure the adapter with the screws as shown. Chapter 8. Replacing FRUs (Type 7848)

  • Page 100: Replacing The Cmos Battery

    8. Replace the cover, and plug in the power cord. See “Completing the FRU replacement” on page 107. Note: When the computer is turned on for the first time after battery Lenovo E200 Hardware Maintenance Manual replacement, an error message might be displayed. This is normal after replacing the battery.

  • Page 101: Replacing The Power Supply

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support Attention Never remove the cover on a power supply or any part that has the following label attached.
  • Page 102 7. Reconnect all power supply cables to the system board and the drives. See “Identifying parts on the system board” on page 85. Make sure the cables are correctly routed. 8. Go to “Completing the FRU replacement” on page 107. Lenovo E200 Hardware Maintenance Manual...

  • Page 103: Replacing The Heat Sink And Fan Assembly

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that was included with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support This section provides instructions on how to replace the heat sink and fan assembly.
  • Page 104 9. Connect the heat sink and fan assembly cable to the microprocessor fan connector on the system board. 10. Go to “Completing the FRU replacement” on page 107. Lenovo E200 Hardware Maintenance Manual fan assembly cable is toward the microprocessor fan connector on the system board.

  • Page 105: Replacing The Microprocessor

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support CAUTION: The heat sink and microprocessor might be very hot. Turn off the computer and wait three to five minutes to let the computer cool before opening the computer cover.
  • Page 106 Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible. 7. Make sure that the small handle is in the raised position. Lenovo E200 Hardware Maintenance Manual...
  • Page 107 8. Remove the protective cover 2 that protects the gold contacts on the new microprocessor 1 . 9. Hold the new microprocessor and align the notches on it with the tabs in the microprocessor socket, or align the small triangle on one corner with the corresponding beveled corner of the microprocessor socket.

  • Page 108: Replacing The System Board

    11. Lower the microprocessor straight down into the system board socket of the new system board. Lenovo E200 Hardware Maintenance Manual protect the socket on the new system board. Remove the black plastic cover and place it on the microprocessor socket of the failing system...
  • Page 109 12. Lower the microprocessor retainer. 13. Lock the retainer with the small handle to secure the microprocessor in the socket. 14. The new retention bracket has plastic one-way rings on the posts that insert into the rear of the new system board. Install the new retention bracket by aligning the posts on the module with the holes in the system board and pushing the posts through the holes until the retention bracket is secure.

  • Page 110: Replacing A Hard Disk Drive

    5. Slide the new drive into the bay until the screws holes are aligned and install the four screws into the drive bay. 6. Reconnect the signal and power cables to the rear of the hard disk drive. 7. Go to “Completing the FRU replacement” on page 107. Lenovo E200 Hardware Maintenance Manual...

  • Page 111: Replacing An Optical Drive

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support 1. Remove the computer cover. See “Removing the computer cover” on page 86.
  • Page 112 Media Card Reader with the hole in the chassis. 7. Install the screw to secure the Media Card Reader to the chassis. 8. Connect the Media Card Reader cable to the system board. 9. Go to “Completing the FRU replacement” on page 107. Lenovo E200 Hardware Maintenance Manual...

  • Page 113: Replacing The Power Switch Or Led Assembly

    “Important safety information” in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy of the ThinkCentre Safety and Warranty Guide, go to: http://www.lenovo.com/support 1. Disconnect the power switch/LED assembly cable from the system board. See “Identifying parts on the system board”...
  • Page 114 Lenovo E200 Hardware Maintenance Manual...

  • Page 115: Chapter 9. Fru Lists

    Hard disk drive, HDD 160GB W Digital XL80SM-3 SATA II, 7200 RPM 8MB ROHS (models B1P, B2P, B1S, B2S) Hard disk drive, HDD 250GB SEAGATE TONKA 2-2 7200RPM, S-ATA II 8MB ROHS (models B3P, B3S) © Lenovo 2005, 2008. Portions © IBM Corp. 2005. 7848 FRUs FRU# CRU Tier...
  • Page 116 Adapters and miscellaneous FRUs TECLADO PS/2 BRASIL PRETO (models B1P, B2P, B3P) Lenovo USB Preferred Pro Full Size ID LA Spanish (models D1S, D2S, D3S) MOUSE PRIMAX USB OPTICAL WHEEL 400 DPI ROHS (models B1P, B2P, B3P, D1S, D2S, D3S)

  • Page 117: Chapter 10. Additional Service Information

    Updating (flashing) BIOS from a diskette or disc This section describes information about how to update (flash) the BIOS using a diskette or a disc. System BIOS program updates are available at: http://www.lenovo.com/support © Lenovo 2005, 2008. Portions © IBM Corp. 2005.

  • Page 118: Updating (Flashing) Bios From The Operating System

    Note: Due to the constant improvements made to the Web site, Web page content (including the links referenced in the following procedure) is subject to change. 1. From your browser, type http://www.lenovo.com/support in the address field and press Enter. 2. Locate the Downloadable files for your machine type as follows: a.

  • Page 119: Power Management

    Power management Power management reduces the power consumption of certain components of the computer such as the system power supply, processor, hard disk drives, and some monitors. Automatic configuration and power interface (ACPI) BIOS Being an ACPI BIOS system, the operating system is allowed to control the power management features of the computer and the setting for Advanced Power Management (APM) BIOS mode is ignored.

  • Page 120: Recovering Software

    The set of Product Recovery discs will enable the contents of the hard disk to be restored to the same state as when the computer was originally shipped from the factory. For more information on recovering factory-installed software, refer to “Recovering software” in the User Guide. Lenovo E200 Hardware Maintenance Manual...

  • Page 121: Appendix. Notices

    Web sites. The materials at those Web sites are not part of the materials for this Lenovo product, and use of those Web sites is at your own risk.

  • Page 122: Television Output Notice

    Macrovision Corporation. Reverse engineering or disassembly is prohibited. Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo The Lenovo logo...
  • Page 124 Part Number: 36-LNV-LC00121 Printed in USA (1P) P/N: 36-LNV-LC00121...

This manual is also suitable for:

7848

Table of Contents