Table of Contents
Advertisement
34
en | Troubleshooting
7
Troubleshooting
7.1
Resolving problems
The following table is intended to help identify the causes of
malfunctions and correct them where possible.
Malfunction
No image on screen. Check that the power cord and line
The image on the
screen is dim.
The image on the
screen is dark.
The camera is not
working properly,
and its surface is
hot.
The image on the
screen flickers.
AM18-Q0609 | v1.0 | 2012.01
Solution
connection between the camera and
monitor are fixed properly.
Check that you have properly connected
VIDEO cable to the camera VIDEO
output jack.
Is lens stained with dirt? Clean your lens
with soft, clean cloth.
Ensure the monitor is set up correctly.
If the camera is exposed to strong light,
change its position.
Adjust the focus.
Adjust the contrast of the monitor.
If you have an intermediate device, set
the 75 Ohm / Hi-z correctly.
Check that you have properly connected
the camera to an appropriate power
source.
Check whether the camera is exposed
to strong sunlight or fluorescent
lighting.
Installation Manual
Indoor Dome Camera
Bosch Security Systems
- Quick Links:
- Camera Controls
- Installation
Hide quick links:
Advertisement
Table of Contents
