Menu List - NEC NC1600C Service Manual
Dlp cinema projector
Hide thumbs
Also See for NC1600C:
- User manual (57 pages) ,
- Specifications (2 pages) ,
- Important information manual (72 pages)
Table of Contents
Advertisement
2. Operating the Projector Using the Touch Panel
2-2. Menu List
Menus in parentheses are menus for our service personnel. Normally, these menus cannot be used.
Main menu
Displayed items
START
POWER
MODE button
MAIN
Preset button
Title
Test
Anamorphic Out/In
Douser Open/Close
(Edit Preset Button)
Display of input signal
LENS
Fine-adjust Mode
Shift
Zoom
Focus
Lens Memory
LAMP
Adjust
Lamp Output
FeedBack
Lamp Memory
Information
(Setup)
STATUS
(TITLE)
INFO.
(SETUP)
(LAN)
buttons
Sheild Button
(*Note) : Preset buttons 1 to 8 correspond to macro keys 1 to 8 on the projector.
NOTE
If the projector head is being used with the NC800 series, the functions below are unavailable.
• Anamorphic lens control (The [Anamorphic Out/In] button on the Main Screen)
• Lamp information display (The [Information] button on the LAMP Screen
• Lamp setting (The [Setup] button on the LAMP Screen)
8
This screen is displayed when the controller is started.
To turn on and off the projector.
Button to change the menu mode.
Select the input signal from this screen.
To display the titles assigned to preset buttons. (*Note)
Displays the title list registered in the projector.
To display the list of test putterns.
To control the anamorphic lens.
To control the Douser function.
To set the titles assigned to preset buttons. (*Note)
A list of input signals selected by the Select field (Preset button/Title/Test)
is displayed.
Control the lens from this screen.
Set to operate only while pressing the Lens Shift, Zoom, or Focus buttons.
To shift the lens.
To zoom in and zoom out.
To adjust focus.
To save the current lens settings and call the saved settings.
Screen for various settings and display for the lamp.
To adjust the lamp brightness.
To adjust the lamp output.
To set the lamp brightness constant mode that uses a brightness sensor.
To save the current lamp settings, and call the saved settings.
To display the lamp information.
To set the lamp data.
Projector setting status is displayed in this screen.
Set titles and display the list in this screen. This is used by the service personnel.
Screen for display of various information about the projector.
Screen for initial setting upon installation. This is used by the service personnel.
Screen for LAN setting of SYSTEM and CINEMA.
This is used by the service personnel.
Buttons to switch between pages of the main menu bar.
Button that disables/enables operations from the touch panel screen.
Explanation
Reference
page
9
11
13
15
17
18
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
