Table of Contents
Advertisement
WLAN antenna
Description
WLAN antenna (includes antenna cables, transceivers, and double-sided adhesive)
Before removing the WLAN antenna, follow these steps:
1.
Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2.
Disconnect the power from the tablet by unplugging the power cord from the tablet.
3.
Disconnect all external devices from the tablet.
4.
Remove the back cover (see
a.
Middle frame and battery (see
b.
Rear-facing webcam (see
c.
System board (see
Remove the WLAN antenna:
1.
Remove the tape (1) that secures the WLAN antenna cable to the middle frame.
2.
Detach the WLAN antenna transceivers (2) from the middle frame. (The WLAN antenna transceivers are
attached to the middle frame with double-sided adhesive.)
3.
Remove the WLAN antenna.
28
Chapter 5 Removal and replacement procedures
Back cover on page
14), and then remove the following components:
Middle frame and battery on page
Rear-facing webcam on page
System board on page
20)
Spare part number
805077-001
15)
19)
Hide quick links:
Advertisement
Table of Contents
