Table of Contents
Advertisement
• Remote controller
Once the controls are set, the same operation mode can be repeated by simply pressing the ON/OFF button.
• Operation buttons
Set Temperature buttons
Down
Up
Timer Menu button
(Monitor/Set button)
Mode button (Return button)
Set Time buttons
Timer On/Off button
(Set Day button)
Opening the
door.
• Display
For purposes of this explanation,
all parts of the display are shown
as lit. During actual operation, only
the relevant items will be lit.
Identifies the current operation
Shows the operating mode, etc.
* Multilanguage display is sup-
ported.
"Centrally Controlled" indicator
Indicates that operation of the re-
mote controller has been prohib-
ited by a master controller.
"Timer is Off" indicator
Indicates that the timer is off.
Temperature Setting
Shows the target temperature.
Caution
Only the Power on indicator lights when the unit is stopped and power supplied to the unit.
If you press a button for a feature that is not installed at the indoor unit, the remote controller will display the "Not Available"
message.
If you are using the remote controller to drive multiple indoor units, this message will appear only if the feature is not
present at the parent unit.
When power is turned ON for the first time, it is normal that "PLEASE WAIT" is displayed on the room temperature indication
(For max. 2minutes). Please wait until this "PLEASE WAIT" indication disappear then start the operation.
8
Back
Ahead
BACK
PAR-21MAA
Day-of-Week
Shows the current day of the week.
Time/Timer Display
Shows the current time, unless the simple or Auto Off
timer is set.
If the simple or Auto Off timer is set, shows the time
remaining.
˚F˚C
Up/Down Air Direction indica-
tor
The indicator
shows the direc-
tion of the outcoming airflow.
"One Hour Only" indicator
Displayed if the airflow is set to
weak and downward during COOL
or DRY mode. (Operation varies
according to model.)
The indicator goes off after one
hour, at which time the airflow di-
rection also changes.
TEMP.
ON/OFF
MENU
ON/OFF
MONITOR/SET
DAY
CLOCK
OPERATION
Built-in temperature sensor
TIME SUN MON TUE WED THU FRI SAT
TIMER
Hr
ON
AFTER
AFTER
OFF
ERROR CODE
FUNCTION
˚F˚C
FILTER
WEEKLY
SIMPLE
ONLY1Hr.
AUTO OFF
Room Temperature display
Shows the room temperature. The room
temperature display range is 8–39°C.
The display flashes if the temperature
is less than 8 °C or 39 °C or more.
Louver display
Indicates the action of the swing louver.
Does not appear if the louver is station-
ary.
(Power On indicator)
Indicates that the power is on.
ON/OFF button
Fan Speed button
Filter
button
(<Enter> button)
Test Run button
Check button (Clear button)
FILTER
CHECK
TEST
Airflow Up/Down button
CLEAR
Louver button
(
Operation button)
To preceding operation
number.
Ventilation button
(
Operation button)
To next operation
number.
"Sensor" indication
Displayed when the remote controller
sensor is used.
"Locked" indicator
Indicates that remote controller but-
tons have been locked.
"Clean The Filter" indicator
Comes on when it is time to clean the
filter.
Timer indicators
The indicator comes on if the corre-
sponding timer is set.
Fan Speed indicator
Shows the selected fan speed.
Ventilation indicator
Appears when the unit is running in
Ventilation mode.
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
