Panasonic DMR-HS2 Operating Instructions Manual page 67
Dvd video recorder
Hide thumbs
Also See for DMR-HS2:
- Operating instructions manual (76 pages) ,
- Operating instructions manual (94 pages)
Advertisement
On the television
Page
8
18
8
38
No disc.
l
You haven't inserted a disc. Correctly insert a disc that this unit can use.
@The disc is upside down. If it is a single-sided disc, insert it so the label is facing up.
*The
unit cannot record on the disc you inserted. The unit cannot record onto finalized DVD-R,
This is non-recordable
disc.
DVD-Video, CDs, or video CDs. Insert a DVD-RAM or unfinalized DVD-R.
l
You inserted an unformatted DVD-RAM. Format the disc with this unit.
This disc is not formatted
properly.
Please format the disc in
'DISC SETTING' to record.
l
You inserted an incompatible disc. Insert a compatible disc.
l The write-protect tab on the cartridge is set to PROTECT.
Use a ballpoint pen or similar to release the write protection.
8
This disc cannot be read.
Please check write protect
tab on the disc.
l The program is write-protected.
Cancel the protection with the Direct Navigator.
*The disc is write-protected.
Cancel Disc Protection with DISC SETTING.
l
The program was copy-guarded.
l
No space left on HDD, DVD-RAM or DVD-R.
*The connection from the external device (DV equipment etc.) was lost during recording.
l
Recording was not completed for some other reason.
*The disc is scratched. Use another disc.
l The disc is dirty.
l
You inserted an incompatible disc. Insert a compatible disc.
l
No space left on HDD, DVD-RAM or DVD-R.
+ Create space by erasing any unwanted programs. mm
+ Use a new disc. m
m
+ Erase any unwanted fifes (still pictures).
l YOU may record up to 300 folders and 3000 files (still pictures) using this unit.
40
38
Contents
of this disc are
protected.
Cannot finish recording
completely.
-
-
-
-
Cannot record.
-
10
8
38,40
-
48
-
HDD is full.
Disc is full.
Cannot dub from this disc.
l
Dubbing prohibited disc in tray.+ Dubbing to the HDD is not possible.
*The clock is not set. Set the clock.
-
64
Please set clock.
l YOU tried to play a disc with a region number different from this unit's region number. This unit can
Cover
only play discs with the region numbers compatible with this unit (1, All, or including the number 1).
page
62
This disc may not be played
in your region.
Your selection
exceeds the
recorder's
rating limit.
Cannot play back on this unit.
No PC CARD
No valid PC card
@A ratings level has been set for DVD-Video with this unit.
Unlock the unit with "Ratings" in "Disc" in the SETUP menu.
l
You tried to playback incompatible pictures (TIFF images and MOTION JPEG cannot be played back).
*The
PC card is not inserted. If this message is displayed with a compatible
PC card already
inserted, turn off the power, remove and then re-insert the card.
.The PC card format does not match.
*The PC card inserted is not compatible.
9
25
9
9
No DVD-RAM disc
l
DVD-RAM is not loaded.
l
DVD-RAM is not formatted.
(Even if this message is displayed, it may sometimes be possible to playback moving picture parts.)
38
l
Release the protection on the PC card.
l
Release the protection on the DVD-RAM.
aThere is no compatible folder in this unit.
l The PC card is currently protected + Release the write protection.
l There is no space remaining. + Erase any unwanted files (still pictures).
l
To enable playback of your DVD-R on compatible equipment, it is necessary to finalize it.
9
8, 38
9
9
48
Please check write protect
tab.
No folder
Cannot write.
Finalizing
is necessary
for
compatible
playback.
3n the unit's display
Uli
NO DISC
*The disc is dirty or badly scratched.
-Clean the disc if it is dirty.
-The disc cannot be played if it is scratched and this display doesn't disappear.
*You have inserted a disc the unit cannot play or record on.
- Insert a disc the unit can play or record on.
l
cleaning has been carried out using DVD-RAM/PD lens cleaner.
+ Cleaning is finished. Press [I
OPEN/CLOSE] and remove the disc cleaner from the disc tray.
u14
aThe unit is hot.
-The
unit switches to standby automatically for safety reasons and you cannot operate it. Wait for
about 30 minutes for the service number to disappear.
-Select a position with good ventilation when installing the unit.
-Do not block the cooling fan on the rear of the unit.
u99
l
The unit fails to operate properly.
- Press [a, DVD POWER] to switch the unit to standby. Now press [C!l, DVD POWER1 again to turn
the unit on.
CHK REMOTE
@The remote control and main unit are using different codes.
-Change
the code on the remote control or main unit.
RECOVER
l
If there is a power failure or the AC plug was disconnected while the power was on.
+ The unit is carrying out its recovery process. Wait until the message disappears.
38
10
8
-
-
-
-
-
65
-
Advertisement
