hit counter script
HP Pavilion x360 Convertible Maintenance And Service Manual
  1. Manuals
  2. Brands
  3. HP Manuals
  4. Laptop
  5. ENVY x360 Convertible PC
  6. Maintenance and service manual

HP Pavilion x360 Convertible Maintenance And Service Manual

Hide thumbs Also See for Pavilion x360 Convertible:
Table of Contents

Advertisement

Quick Links

See also: Maintenance and Service Manual
HP Pavilion x360 Convertible
Maintenance and Service Guide
IMPORTANT! This document is intended for HP
authorized service providers only.

Advertisement

Table of Contents
loading

Related Manuals for HP Pavilion x360 Convertible

Summary of Contents for HP Pavilion x360 Convertible

  • Page 1 HP Pavilion x360 Convertible Maintenance and Service Guide IMPORTANT! This document is intended for HP authorized service providers only.
  • Page 2 This computer may require upgraded and/ or change without notice. The only warranties for separately purchased hardware and/or a DVD HP products and services are set forth in drive to install the Windows 7 software and the express warranty statements take full advantage of Windows 7 functionality.
  • Page 3 Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the device, do not place the device directly on your lap or obstruct the device air vents. Use the device only on a hard, flat surface. Do not allow another hard surface, such as an adjoining optional printer, or a soft surface, such as pillows or rugs or clothing, to block airflow.
  • Page 4 Safety warning notice...

  • Page 5: Table Of Contents

    Table of contents 1 Product description ............................1 2 External component identification ......................... 4 Right side ................................4 Left side ................................. 5 Bottom ................................... 6 Display ................................... 7 Changing your notebook to an entertainment stand ................. 8 Changing your notebook to a tablet ....................8 Top ..................................
  • Page 6 Synchronizing a tablet and keyboard (select models only) ................60 7 Using HP PC Hardware Diagnostics (UEFI) ...................... 61 Downloading HP PC Hardware Diagnostics (UEFI) to a USB device ..............62 8 Backing up, restoring, and recovering ......................63 Creating recovery media and backups ........................ 63 Creating HP Recovery media (select models only) ................
  • Page 7 29.5-cm (11.6-in) HD+ display specifications ..................... 71 10 Power cord set requirements ........................72 Requirements for all countries ........................... 72 Requirements for specific countries and regions ....................72 11 Recycling ..............................74 Index ................................75...
  • Page 8 viii...

  • Page 9: Product Description

    Category Description Product Name HP Pavilion x360 Convertible Processor Intel® CoreT M-5Y10c processor (0.8 GHz, turbo up to 2.0GHz, 4 MB L3, 1600 MHz), dual core Intel Pentium N3700 processor (1.6 GHz, turbo up to 2.4 GHz, 2 MB L2, 1600 MHz), quad core Intel Celeron N3050 processor (1.6 GHz, turbo up to 2.16 GHz, 2 MB L2, 1600 MHz), dual core...
  • Page 10 Support for external 9.5 mm tray load, SATA, DVD+/-RW DL SuperMulti drive only Audio and video Integrated HP TrueVision camera: HD (1280×720 by 30 frames per second), fixed (no tilt), with activity light Dual array Digital Microphones w/ appropriate software - beam forming, echo cancellation, noise...
  • Page 11 Category Description ● 45-W HP Smart AC adapter (non-PFC, with 26.5 mm z-height adapter [non-slim]) (not for India/People’s Republic of China) ● 65-W HP Smart AC adapter (non-PFC, EM, 4.5-mm) (only for India/People’s Republic of China) 1 m length power cord Support for the following battery: ●...

  • Page 12: External Component Identification

    Safety, and Environmental Notices. To access this document: ▲ From the Start screen, type support, and then select the HP Support Assistant app. ‒ or – From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop.

  • Page 13: Left Side

    RJ-45 (network) jack/status lights Connects a network cable. ● White: The network is connected. ● Amber: Activity is occurring on the network. ● AC adapter light White: The computer is connected to external power and the battery is fully charged. ●...

  • Page 14: Bottom

    To increase speaker volume, press the + edge of the button. ● Hard drive light Blinking white: The hard drive is being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the hard drive. Bottom Component Description Speakers Produce sound.

  • Page 15: Display

    To access this document: From the Start screen, type support, and then select the HP Support Assistant app. ‒ or – From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop.

  • Page 16: Changing Your Notebook To An Entertainment Stand

    Your computer can function as a classic notebook and, in addition, the display can be rotated so that the computer transforms into an entertainment stand or a tablet. Changing your notebook to an entertainment stand To change your notebook to an entertainment stand, raise the display, and then rotate the display backward to a stand position (about 315 degrees).

  • Page 17: Top

    TouchPad Component Description TouchPad zone Reads your finger gestures to move the pointer or activate items on the screen. Left TouchPad button Functions like the left button on an external mouse. Right TouchPad button Functions like the right button on an external mouse. Lights Component Description...

  • Page 18: Keys

    Keys Component Description Displays system information when pressed in combination with key. Executes frequently used system functions when pressed in combination with the key, or on select models, the spacebar. Windows key Returns you to the Start screen from an open app or the Windows desktop.

  • Page 19: Labels

    Microsoft® Certificate of Authenticity label (select models only prior to Windows 8)—Contains the Windows Product Key. You may need the Product Key to update or troubleshoot the operating system. HP platforms with Windows 8 or Windows 8.x preinstalled do not have the physical label. Instead a Digital Product Key is electronically installed.

  • Page 20: Illustrated Parts Catalog

    Computer major components NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Chapter 3 Illustrated parts catalog...
  • Page 21 Item Component Spare part number Display assembly not spared Top cover (includes keyboard and TouchPad) For use in Belgium 809543-A41 For use in Brazil 809543-201 For use in Bulgaria 809543-261 For use in Canada (English/French) 809543-DB1 For use in the Czech Republic and Slovakia 809543-FL1 For use in France 809543-051...
  • Page 22 Item Component Spare part number USB/audio jack board (includes cable) 809545-001 WLAN module: Intel Dual Band Wireless-AC 3160 802.11 ac 1x1 WiFi + BT 4.0 Combo Adapter for use in Brazil 751416-005 Intel Dual Band Wireless-AC 3160 802.11 ac 1x1 WiFi + BT 4.0 Combo Adapter 784644-005 Realtek RTL8723BE 802.11b/g/n 1x1 Wi-Fi + BT4.0 Combo Adapter 792610-005...

  • Page 23: Mass Storage Devices

    Item Component Spare part number 8-GB 693374-005 4-GB 691740-005 Mass storage devices Component Spare part number Hard drive (does not include hard drive bracket, hard drive connector cable, or screws): 1-TB, 5400-rpm, 7.0-mm 762990-005 500-GB, 5400-rpm, 7.0-mm 778186-005 500-GB, 5400-rpm, 8 GB hybrid SSD, 7.0-mm 732000-005 Hard Drive Hardware Kit, includes: 809537-001...

  • Page 24: Display Assembly Subcomponents

    Display assembly subcomponents Item Component Spare part number Display panel (raw) 809548-001 UWVA 809549-001 Display cable 809576-001 Display hinges (left and right; includes rubber cap) 809539-001 Display hinge covers (left and right) For use in red models 809541-001 For use in silver models 809540-001 For use in green models 809542-001...

  • Page 25: Miscellaneous Parts

    809575-001 Purple models 816503-001 Miscellaneous parts Component Spare part number AC adapter 45-W HP Smart AC adapter (non-PFC, 4.5-mm, non-slim) 741727-001 65-W HP Smart AC adapter (non-PFC, EM, 4.5-mm) 714657-001 Power cord (3-pin, black, 1.0-m): For use in Argentina 755530-D01...
  • Page 26 Component Spare part number For use in silver models 809550-001 For use in red models 809551-001 For use in green models 809552-001 For use in purple models 816522-001 Screw Kit 809553-001 Synaptics Active Pen 773175-001 HDMI to VGA adapter 701943-001 Chapter 3 Illustrated parts catalog...

  • Page 27: Removal And Replacement Procedures Preliminary Requirements

    Removal and replacement procedures preliminary requirements Tools required You will need the following tools to complete the removal and replacement procedures: ● Flat-bladed screw driver ● Magnetic screw driver ● Phillips P0 and P1 screw drivers Service considerations The following sections include some of the considerations that you must keep in mind during disassembly and assembly procedures.

  • Page 28: Cables And Connectors

    Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed in their proper locations during the reassembly process. Improper cable placement can damage the computer. Cables must be handled with extreme care to avoid damage. Apply only the tension required to unseat or seat the cables during removal and insertion.

  • Page 29: Grounding Guidelines

    Grounding guidelines Electrostatic discharge damage Electronic components are sensitive to electrostatic discharge (ESD). Circuitry design and structure determine the degree of sensitivity. Networks built into many integrated circuits provide some protection, but in many cases, ESD contains enough power to alter device parameters or melt silicon junctions. A discharge of static electricity from a finger or other conductor can destroy static-sensitive devices or microcircuitry.

  • Page 30: Packaging And Transporting Guidelines

    Packaging and transporting guidelines Follow these grounding guidelines when packaging and transporting equipment: ● To avoid hand contact, transport products in static-safe tubes, bags, or boxes. ● Protect ESD-sensitive parts and assemblies with conductive or approved containers or packaging. ● Keep ESD-sensitive parts in their containers until the parts arrive at static-free workstations.
  • Page 31 Equipment guidelines Grounding equipment must include either a wrist strap or a foot strap at a grounded workstation. ● When seated, wear a wrist strap connected to a grounded system. Wrist straps are flexible straps with a minimum of one megohm ±10% resistance in the ground cords. To provide proper ground, wear a strap snugly against the skin at all times.

  • Page 32: Removal And Replacement Procedures For Authorized Service Provider Parts

    Accessing these parts can damage the computer or void the warranty. NOTE: HP continually improves and changes product parts. For complete and current information on supported parts for your computer, go to http://partsurfer.hp.com, select your country or region, and then follow the on-screen instructions. Component replacement procedures This chapter provides removal and replacement procedures for Authorized Service Provider only parts.

  • Page 33: Top Cover

    Top cover Description Spare part number Base enclosure: For use in red models 809671-001 For use in silver models 809670-001 For use in green models 809672-001 For use in purple models 816504-001 Top cover with keyboard and TouchPad: For use in Belgium 809543-A41 For use in Brazil 809543-201...
  • Page 34 Before removing the top cover, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer. Disconnect all external devices from the computer.
  • Page 35 Run a plastic, non-marking tool around the seam to disengage the top cover from the computer. Separate the top cover from the computer by separating and lifting up at the seam on the left side (1), top (2), and right side (3), far enough to access the keyboard and touchpad connectors on the system board.

  • Page 36: Touchpad

    TouchPad Description Spare part number TouchPad not spared Before removing the TouchPad, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer.

  • Page 37: Hard Drive

    Hard drive NOTE: The Hard Drive Hardware Kit, spare part number 809537-001, includes the hard drive bracket and hard drive connector cable. Description Spare part number 1-TB, 5400-rpm, 7.0-mm 762990-005 500-GB, 5400-rpm, 7.0-mm 778186-005 500-GB, 5400-rpm, 8 GB hybrid SSD, 7.0-mm 732000-005 Hard Drive Hardware Kit (includes hard drive bracket and connector cable) 809537-001...
  • Page 38 Lift the hard drive out of the computer (2). If it is necessary to disassemble the hard drive, perform the following steps: Disconnect the hard drive connector cable (1) from the hard drive. Pull the sides of the bracket away from the drive (2) to remove the pegs that secure the bracket to the hard drive.

  • Page 39: Solid-State Drive (M.2)

    Solid-state drive (M.2) Description Spare part number 128 GB solid-state drive (SSD), M.2, TLC 809555-001 Before removing the solid-state drive, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 40 Reverse this procedure to install the solid-state drive. Chapter 5 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 41: Usb/Audio Jack Board (Right Side)

    USB/audio jack board (right side) Description Spare part number USB/audio jack board (includes cable) 809545-001 The USB/audio jack board is located on the right side of the computer. Do not confuse this board with the USB/card reader/volume board on the left side of the computer. Before removing the USB/audio jack board, follow these steps: Shut down the computer.
  • Page 42 Lift the board straight up to disconnect it from the connector on the system board (3). Reverse this procedure to install the USB/audio board. Chapter 5 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 43: Usb/Card Reader Board (Left Side)

    USB/card reader board (left side) Description Spare part number USB/card reader board for use in models with an Intel Core processor (includes cable) 809544-001 USB/card reader board for use in models with an Intel Pentium or Celeron processor (includes cable) 819789-001 The USB/card reader/volume board is located on the left side of the computer.
  • Page 44 Remove the board from the computer (3). Reverse this procedure to install the USB/card reader board. Chapter 5 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 45: Speakers

    Speakers Description Spare part number Speaker Kit (includes left and right speakers and cable) 809554-001 Before removing the speakers, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 46 Remove the four Phillips PM2.5×6.0 screws (3) that secure the speakers to the computer. NOTE: Rubber gaskets fit around each screw. For installation, make sure the gaskets are properly installed. Lift the speakers from the computer, noting the proper cable routing for reinstallation. Reverse this procedure to install the speakers.

  • Page 47: System Board

    System board NOTE: The system board spare part kit includes replacement thermal material. Description Spare part number System board for use in models equipped with: Intel CoreT M-5Y10C processor and the Windows 8.1 Standard operating system 809560-501 Intel CoreT M-5Y10C processor and a non-Windows 8 operating system 809560-001 Intel Pentium N3700 processor and the Windows 8.1 Standard operating system 809557-501...
  • Page 48 Remove the system board: Disconnect the following cables from the system board: (1): Display cable (2): Touch board cable (3): Power connector cable (4): Speaker cable (5): USB/card reader board cable (6): Wireless antennas (may include one or two antennas) (7): Power button board cable Remove the Phillips PM2.5×3.0 screw from the WLAN module (1).
  • Page 49 Loosen the captive screw in the upper right corner of the system board (3). Lift the left side of the system board (1), and the pull the system board toward the left to remove it from the computer (2). Reverse this procedure to install the system board. Component replacement procedures...

  • Page 50: Memory Module

    Memory module Description Spare part number 8-GB (DDR3L-1600) 693374-005 4-GB (DDR3L-1600) 691740-005 IMPORTANT: The memory modules are not customer replaceable. Before removing a memory module, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 51: Wlan Module

    WLAN module Description Spare part number Intel Dual Band Wireless-AC 3160 802.11 ac 1x1 WiFi + BT 4.0 Combo Adapter for use in Brazil 751416-005 Intel Dual Band Wireless-AC 3160 802.11 ac 1x1 WiFi + BT 4.0 Combo Adapter 784644-005 Realtek RTL8723BE 802.11b/g/n 1x1 Wi-Fi + BT4.0 Combo Adapter 792610-005 CAUTION:...

  • Page 52: Heat Sink

    Heat sink Description Spare part number Heat sink for use in models with Intel Core processors (includes replacement thermal material) 809536-001 Heat sink for use in models with Intel Pentium and Celeron processors (includes replacement thermal 819788-001 material) Before removing the heat sink, follow these steps: Turn off the computer.
  • Page 53 Remove the heat sink (2). NOTE: Due to the adhesive quality of the thermal material located between the heat sink and the system board components, it may be necessary to move the heat sink from side to side to detach it. Models with Intel Pentium or Celeron processors: Models with Intel Core processors: NOTE:...
  • Page 54 Models with Intel Pentium or Celeron processors: Reverse this procedure to install the heat sink. Chapter 5 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 55: Battery

    WARNING! To reduce potential safety issues, use only the battery provided with the computer, a replacement battery provided by HP, or a compatible battery purchased from HP. Disconnect the battery cable from the system board (1). Disconnect the speaker cable from the system board (2), lift the tape that secures the cable to the...
  • Page 56 Remove the battery (2). Reverse this procedure to install the battery. Chapter 5 Removal and replacement procedures for Authorized Service Provider parts...

  • Page 57: Display Assembly

    Display assembly The display is only spared at the subcomponent level. The full hinge-up is not spared. Before removing the display assembly, follow these steps: Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Page 58 NOTE: The display enclosure is available using the following spare part numbers: 809574-001 for red models 809573-001 for silver models 809575-001 for green models 816503-001 for purple models Use a thin plastic tool to run along the entire seam of the display to loosen the cover from the display.
  • Page 59 Disconnect the cable from the touch control board (1), and the separate the display enclosure from the display (2). Position the display enclosure next to the display panel so you can access the display cable connected to the back of the display panel. Disconnect the display cable from the back of the display panel by lifting the tape that secures the cable in the connector (1), and then pull the cable out of the connector (2).
  • Page 60 Disconnect the cable (2) from the module. To remove the display hinges: NOTE: The display hinges are available using spare part number 809539-001. Position the display enclosure upright. Remove the Phillips PM2.0×2.0 screw (1) from the top of each hinge and the three broadhead Phillips PM2.5×2.0 screws (2) from the bottom of each hinge that secure the hinges to the display.
  • Page 61 Rotate the top of the hinges inward so that the hinges are at an angle, (1), and then remove the hinges (2). To remove the display hinge covers: NOTE: The display hinge covers are available using spare part number 809541-001 for red models, 809540-001 for silver models, 809542-001 for green models, and 809828-001 for purple models.
  • Page 62 To remove the antenna cables: NOTE: The antenna cables are available using spare part number 809530-001. ▲ Remove the cables from the tape and clips (1) that secure them to the display enclosure, peel the transceivers from the enclosure, and then lift the cables and transceivers from the display enclosure (2).
  • Page 63 Remove the sensor board from the display (3). Reverse this procedure to reassemble and install the display assembly. Component replacement procedures...

  • Page 64: Power Button Board

    Power button board Description Spare part number Power button board (includes cable) 809546-001 Before removing the power button board, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

  • Page 65: Power Connector Cable

    Power connector cable Description Spare part number Power connector cable 807522-001 Before removing the power connector cable, follow these steps: Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. Disconnect the power from the computer by unplugging the power cord from the computer.

  • Page 66: Using Setup Utility (Bios)

    Updating the BIOS Updated versions of the BIOS may be available on the HP website. Most BIOS updates on the HP website are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting the file.

  • Page 67: Downloading A Bios Update

    If your computer is connected to a network, consult the network administrator before installing any software updates, especially system BIOS updates. From the Start screen, type support, and then select the HP Support Assistant app. ‒ or – From the Windows desktop, click the question mark icon in the taskbar area of the Windows desktop.

  • Page 68: Synchronizing A Tablet And Keyboard (Select Models Only)

    Synchronizing a tablet and keyboard (select models only) When you attach a tablet to the keyboard and restart the computer, the BIOS checks to see if the Embedded Controller firmware on the keyboard needs to be synchronized. If so, BIOS will start the synchronization. If the synchronization is interrupted, a notification screen displays for 10 seconds before the tablet restarts and attempts to synchronize again.

  • Page 69: Using Hp Pc Hardware Diagnostics (Uefi)

    Using HP PC Hardware Diagnostics (UEFI) HP PC Hardware Diagnostics is a Unified Extensible Firmware Interface (UEFI) that allows you to run diagnostic tests to determine whether the computer hardware is functioning properly. The tool runs outside the operating system so that it can isolate hardware failures from issues that are caused by the operating system or other software components.

  • Page 70: Downloading Hp Pc Hardware Diagnostics (Uefi) To A Usb Device

    Instructions for downloading HP PC Hardware Diagnostics (UEFI) are provided in English only. There are two options to download HP PC Hardware Diagnostics to a USB device: Option 1: HP PC Diagnostics homepage— Provides access to the latest UEFI version Go to http://hp.com/go/techcenter/pcdiags.

  • Page 71: Backing Up, Restoring, And Recovering

    Use HP Recovery Manager after you successfully set up the computer to create HP Recovery media. This step creates a backup of the HP Recovery partition on the computer. The backup can be used to reinstall the original operating system in cases where the hard drive is corrupted or has been replaced. For...

  • Page 72: Using Windows Tools

    The creation process can take an hour or more. Do not interrupt the creation process. ● If necessary, you can exit the program before you have finished creating all of the recovery DVDs. HP Recovery Manager will finish burning the current DVD. The next time you start HP Recovery Manager, you will be prompted to continue, and the remaining discs will be burned.

  • Page 73: Recovering Using Hp Recovery Manager

    ● On select models, if you want to reset your computer using a minimized image, you can choose the HP Minimized Image Recovery option from the HP Recovery partition or HP Recovery media. Minimized Image Recovery installs only drivers and hardware-enabling applications.

  • Page 74: Using The Hp Recovery Partition (Select Models Only)

    Using HP Recovery media to recover You can use HP Recovery media to recover the original system. This method can be used if your system does not have an HP Recovery partition or if the hard drive is not working properly.

  • Page 75: Removing The Hp Recovery Partition (Select Models Only)

    Follow the on-screen instructions. Removing the HP Recovery partition (select models only) HP Recovery Manager software allows you to remove the HP Recovery partition to free up hard drive space. IMPORTANT: After you remove the HP Recovery partition, you can no longer use the Windows Refresh option or the Windows option to remove everything and reinstall Windows.

  • Page 76: Specifications

    Specifications Computer specifications Metric U.S. Dimensions Width 306 mm 12.13 in Depth 208 mm 8.47 in Height 22.5 mm 0.86 in Weight with solid-state drive 1362.9 g 3.01 lbs Weight with hard drive 1462.9 g 3.23 lbs Input power Operating voltage and current 19.5 V dc @ 3.33 A –...

  • Page 77: Hard Drive Specifications

    Hard drive specifications 1-TB, 5400-rpm* 500-GB, 5400-rpm* Dimensions Height 7.0 mm 7.0 mm Length 100.4 mm 100.4 mm Width 69.9 mm 69.9 mm Weight 110 g 110 g Interface type SATA SATA Transfer rate (synchronous, maximum) 1.2 GB/sec 1.1 GB/sec Security ATA security ATA security...

  • Page 78: Solid-State Drive Specifications

    M.2 solid-state drive specifications 128-GB* Dimensions Height 1 mm Length 50.8 mm Width 28.9 mm Weight < 10 g Interface type ATA-7 Transfer rate Sequential Read Up to 160 MB/s Random Read Up to 128 MB/s Sequential Write Up to 115 MB/s Random Write Up to 16 MB/s Ready time, Maximum (to not busy)

  • Page 79: Cm (11.6-In) Hd+ Display Specifications

    29.5-cm (11.6-in) HD+ display specifications Metric U.S. Dimensions Height 20.6 cm 8.11 in Width 28.9 cm 11.38 in Diagonal 29.5 cm 11.6 in Number of colors up to 16.8 million Contrast ratio 200:1 (typical) Brightness 220 nits (typical) Pixel resolution Pitch 0.197 ×...

  • Page 80: 10 Power Cord Set Requirements

    10 Power cord set requirements The wide-range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC, or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the equipment is purchased.
  • Page 81 Country/region Accredited agency Applicable note number South Korea Sweden CEMKO Switzerland Taiwan BSMI The United Kingdom The United States The flexible cord must be Type HO5VV-F, 3-conductor, 1.0-mm² conductor size. Power cord set fittings (appliance coupler and wall plug) must bear the certification mark of the agency responsible for evaluation in the country or region where it will be used.

  • Page 82: 11 Recycling

    Follow the local laws and regulations in your area for battery disposal. HP encourages customers to recycle used electronic hardware, HP original print cartridges, and rechargeable batteries. For more information about recycling programs, see the HP Web site at http://www.hp.com/...

  • Page 83: Index

    52 left side 5 hinge covers right side 4 removing 53 top 9 electrostatic discharge 21 HP PC Hardware Diagnostics (UEFI) computer equipment guidelines 23 downloading 62 major components 12 esc key, identifying 10 specifications 68 Ethernet, product description 2...
  • Page 84 2 system 65 regulatory 11 USB 2.0 6 USB flash drive 66 serial number 11 USB 3.0 4 using HP Recovery media 64 service 11 power button board recovery media wireless certification 11 removal 56 creating 63 WLAN 11...
  • Page 85 Rubber Feet Kit, spare part number tools required 19 top cover removal 25 Screw Kit, spare part number 18 spare part number 25 security cable slot, identifying 6 TouchPad security, product description 3 buttons 9 sensor board removal 28 removing 54 TouchPad zone, identifying 9 spare part number 16, 54 transporting guidelines 22...

Table of Contents