Related Manuals for Pioneer MXT-X386BT
Summary of Contents for Pioneer MXT-X386BT
- Page 1 COMPLETE CAR AUDIO PACKAGE DIGITAL MEDIA RECEIVER AND 16 cm 2-WAY SPEAKERS MXT-X386BT Owner’s Manual MXT-X186UI...
-
Page 2: Table Of Contents
Table of Contents Before You Start Before You Start ................. 2 Thank you for purchasing this PIONEER product To ensure proper use, please read through this manual before using this product. It is Getting Started ................3 especially important that you read and observe WARNINGs and CAUTIONs in this manual. -
Page 3: Getting Started
Basic operation Purpose Head Unit Remote Control Turn on the power* Press SRC/OFF to turn Press SRC to turn on the MXT-X386BT/X186UI on the power. power. Press and hold SRC/OFF Press and hold SRC to M.C. (multi-control) dial Display window to turn off the power. -
Page 4: Display Indication
Detach Attach Display indication Indication Description Appears when a lower tier of the menu or folder exists. Appears when a Bluetooth telephone is connected to this unit by HFP (Hands Free Profile) (page 9) and flashes while the telephone is on hold. (Only for Bluetooth-compatible models.) Appears when a Bluetooth audio player is connected to this unit by A2DP (Advanced Audio Distribution Profile) (page 9). -
Page 5: Setup Menu
Press the M.C. dial to confirm the settings. CAUTION • There is a potential danger of explosion if the battery is incorrectly replaced. When NOTES replacing the battery, replace it with the same type. • You can cancel the menu setting by pressing SRC/OFF. •... -
Page 6: Radio
Menu Item Description buttons can be also used to select a preset station when [SEEK] is set to SP-P/O MODE Select when there is a full-range speaker connected to [PCH] in the FUNCTION settings (page 16). the rear speaker output leads and there is a subwoofer [REAR/SUB.W] connected to the RCA output. -
Page 7: Usb/Ipod/Aux
Use an optional Pioneer USB cable (CD-U50E) to connect the USB device as any device connected directly to the unit will protrude out from the unit, which could be dangerous. -
Page 8: Ipod Control
Purpose Operation Purpose Operation Select a folder/album* Press 1/ or 2/ Change drives in USB device Press BAND/ (Devices that support the USB mass Select a track/song (chapter) Press storage device class protocol only) Fast forward or reverse Press and hold * Compressed audio files only 1 Press Search for a file from a list... -
Page 9: Bluetooth
The MIXTRAX function creates a non-stop mix of your music library. For details between the Bluetooth device address and device name. on MIXTRAX settings, see page 18. Select [Pioneer BT Unit] shown in the device display. NOTES Make sure the same 6-digit number appears on this unit and the device, •... -
Page 10: Basic Operations
Menu Item Description To make a phone call A.CONN Select [ON] to connect to a Bluetooth device Press to display the phone menu. automatically. [ON], [OFF] When two phones are connected, a phone name appears first then a phone VISIBLE Select [ON] so that a Bluetooth device can detect the menu will display. - Page 11 Purpose Operation Phone menu Adjust the volume of the Turn the M.C. dial during the call. Menu Item Description caller’s voice (When private mode is on, this function is not RECENTS Display the missed call history. available.) [MISSED] Turn the privacy mode on or Press BAND/ during the call.
-
Page 12: Bluetooth Audio
Press 5/ Pause/resume playback Press 4/PAUSE. NOTE PIONEER IS NOT LIABLE FOR ANY THIRD PARTY APPS OR CONTENT, INCLUDING WITHOUT LIMITATION THEIR ACCURACY OR COMPLETENESS. THE CONTENT AND FUNCTIONALITY OF SUCH APPS ARE THE SOLE RESPONSIBILITY OF THE APP PROVIDER. -
Page 13: Pandora
(list), then turn the M.C. dial to Pandora® station select the Shuffle or the desired station. (Only for Australia and New Zealand models) Pandora internet radio is a music service not affiliated with Pioneer. More information is available at http://www.pandora.com. -
Page 14: Car Remote Mode
[DELETE YES] appears. 2 Press the M.C. dial. Making the car remote connection To cancel, press BAND/ in step 1. The Bluetooth connection is available for MXT-X386BT. Pause/resume playback Press 4/PAUSE. Thumbs Up Press 1/ Connect this unit with the mobile device. -
Page 15: Settings
If [ON] is selected in [P.APP AUTO ON] (page 18), the car remote application • ILLUMINATION settings (page 18) • MIXTRAX settings (page 18) on the Android device starts automatically, and all the steps are finished. Turn the M.C. dial to select the options, then press to confirm. NOTE If the car remote application has not been installed on your Android device yet, a NOTE... -
Page 16: Audio Settings
Menu Item Description Menu Item Description NEWS PAUSE [ON], [OFF] Interrupt the currently selected source with Pause or resume playback. news programs. (Available only when FM PLAY band is selected.) Start playback. ALARM STOP [ON], [OFF] Interrupt the currently selected source with emergency announcements. -
Page 17: System Settings
Menu Item Description SYSTEM settings SUB.W*2 You can also access to these menus when the unit is turned off. [NOR], [REV], [OFF] Select the subwoofer phase. Menu Item Description SUB.W CTRL*2*3 CLOCK SET Cut-off frequency: [50HZ], Only frequencies lower than those in the [63HZ], [80HZ], [100HZ], selected range are output from the Set the clock (page 5). -
Page 18: Illumination Settings
PIONEER Service Station. DISP FX *2 Please use a commercially available wiring harness for each car model when [PRESET] mode is engaged, and use a commercially available adapter when in [PIONEER]. [ON], [OFF] Set the MIXTRAX special effects on/off. -
Page 19: Connections/Installation
the hole to the engine This unit Connections/Installation compartment. – Cover any disconnected cable connectors with insulating tape. Important Connections – Do not shorten any cables. • When installing this unit in a vehicle – Never cut the insulation of the without an ACC (accessory) position WARNING power cable of this unit in order to... - Page 20 Perform these connections when Connect to the constant 12 V To rear output or subwoofer output using a subwoofer without the supply terminal. Rear speaker or subwoofer optional amplifier. Leave ample 5 cm Connect to terminal controlled by Installation space the ignition switch (12 V DC).
-
Page 21: Installing The Microphone
Screw in one screw on each side to hold the unit in place. Installing the microphone (Only for MXT-X386BT) Screw The microphone should be placed Truss screw (5 mm × 9 mm) Bracket directly in front of the driver at a... - Page 22 Side Double-sided tape Make holes as illustrated. (If 13 mm (1/2 in.) Speed nut needed, remove the door 41 mm (1-5/8 in.) Tapping-screws (4 mm × 25 mm) upholstery.) Speaker installation ф 65 mm (2-5/8 in. Dia.) Cable (gray or white) ф...
-
Page 23: Additional Information
– Perform one of the following cellular phone, that may cause remains, contact your dealer or an operations, then return to the audible interference. authorized Pioneer Service supported by this unit. USB source. – Move electrical devices that may Station for assistance. - Page 24 is displayed, reconnect the iPod – Disconnect the cable from the – Press BAND/ to make a LOGIN ERROR and reset it. device. Once the device’s main connection again. → Your Pandora account is not logged menu is displayed, reconnect the ERROR-23 DISCONNECTED PRESS BAND KEY TO device and reset it.
-
Page 25: Handling Guidelines
384 kbps (VBR) running yet. settings will return to the original – Operate the mobile device to Sampling 32 kHz, 44.1 kHz, 48 AAC files (MXT-X386BT only) settings. start up the application. frequency • Incompatible text saved on the iPod Windows Media™... -
Page 26: Ipod Compatibility
Please note that the use of CAUTION trademark this accessory with iPod or iPhone Pioneer accepts no responsibility for may affect wireless performance. iPod compatibility data lost on the iPod, even if that data Bluetooth Android™ & Google Play is lost while this unit is used. -
Page 27: Specifications
(iTunes encoded only) (Ver. 10.6 Nominal power: 25 W • 50 W × 2 ch/4 Ω + 70 W × 1 ch/2 network) and earlier) (MXT-X386BT) Grille material: Heat-proof resin Ω (for subwoofer) WAV signal format: Linear PCM & MS... - Page 28 © 2015 PIONEER CORPORATION. All rights reserved. <QRD3335-A> GS...