Operating and Installation Instructions Oven H 4880 BP To prevent accidents and machine damage, read these instructions before installation or use. M.-Nr. 06 426 290...
Improper use of the appliance can lead to personal injury and material damage. Read all instructions before installing or using the oven for the first time. Keep these operating instructions in a safe place and pass them on to any future user.
Do not lean, sit, or place heavy items on the open oven door. Only use the Miele roast probe supplied with the oven. Contact Miele if you need to purchase a new probe. To prevent damage, remove the roast probe from the oven when it is not being used.
Children should not be left alone or unattended in an area where an oven is in use. Never allow children to sit or stand on any part of the oven. Caution: Do not store items of interest to children in cabinets above an oven.
Door contact switch * d Upper heating element e Rotisserie motors f Convection fan g Roast probe socket Guide to the oven h Light i Non-tip, six level runners j Data plate k Oven door * This switch shuts off the heating element and convection fan when the door is opened during use.
Display shows the time or the functions. f "Timer" touch control to set a timer independent of an oven function. g "Clear" touch control to delete the last entry or to clear menu items.
Wire rack The racks are to be slid into the runners on either side of the oven. They have non-tip safety notches which prevent them from being pulled out completely while the oven is in use. When inserting a rack, always check that the safety notches are at the rear of the oven.
Oven accessories Grease filter The filter helps to keep the oven fan clean from moisture and grease. Anytime meat or poultry is prepared insert the grease filter in front of the fan opening. Roast probe The roast probe reliably monitors the core temperature of meat and poultry during a roasting function.
The system lock can be activated to prevent children from operating the oven or to conserve standby power when the oven will not be used for some time (e.g. vacation). If activated the ) symbol will show in the display when the oven is switched off.
Using the oven display This oven uses soft key technology and an LCD display to assist in the selection of functions. To select a function, touch the control next to the desired function. The arrow next to each displayed function points to its corresponding control.
The default oven settings can be changed in the function "SETTINGS J". In this function you can customize the oven to suit your preferences. Settings may be adjusted by touching the appropriate touch control. Available settings: SETTINGS ( LANGUAGE J...
– whether or not the time is displayed, Clock-Display On Clock-Display Off ^ Touch the "OK" control to confirm the entries. If power to the oven is cut off for more than 4 days, the clock will have to be reset. LANGUAGE english ( english...
The default temperature of each function can be adjusted within the range shown below. If a temperature out of the range is selected, the oven will revert to the default temperature. ^ Touch the control of the function whose default temperature you wish to alter.
SETTINGS Oven Light The "on" duration of the oven light can be altered. ^ Touch the control of the light setting you wish to choose. – "Off after 1 minute" The light goes off after the first minute of a function.
Tone Options Unique tones may be set for each of the two timers to differentiate the timers from an oven function tone. "Timer 1" and "Timer 2" The tone of Timer 1 and Timer 2 can be set to one of five tone options.
SETTINGS "Tone Short / Long" The duration of the timer and oven tones can be modified. – "Tone short" will beep in quick succession when an oven signal or the oven timer sounds. – "Tone long", a continuous tone will sound when an oven signal or the oven timer sounds.
Reset The factory settings of the oven can be restored through the "RESET" function. – Temperatures – Settings – Favorites Reset Temperatures If the request is confirmed with "yes", all changed temperatures will be restored to the factory default. Reset Settings If the request is confirmed with "yes", all...
Before using the oven Heat the oven New ovens may have a slight odor during the first few uses. To eliminate the odor quickly, the oven should be operated at a high temperature for 2 hours. Before heating the oven for the first time remove (if present) –...
Page 21
^ Set the temperature to 500 °F (260 °C) using the keypad. ^ Set the timer to run the oven for 2 hours by touching the "Delay Start" control. ^ Select "Duration". Set the duration by entering "2", "0", "0" using the keypad.
(160 °C) will be displayed next to the function name. Adjusting the oven temperature This oven has been factory tested for the optimum operating temperature of each function. This temperature can be adjusted if needed. ^ Touch the "Temperature" control.
A tone will sound once the oven has finished preheating. ^ Place the food in the oven once the temperature has been reached. The oven should not be preheated when using "AUTO ROAST".
30 minutes. If a duration time is entered, a delay start time will automatically be calculated. If no duration time is entered, the oven will calculate a duration based on the current time. ^ Confirm the entry by touching the "OK"...
^ Select the option you wish to cancel. Turning off the oven ^ Touch the "Off" control. The oven will turn off and the time of day will appear in the display. At the end of cooking: CONVECTION BAKE 325°F 12:23 –...
Setting the timer Setting a timer The timer can be used to time any activity in the kitchen and can be set independently of a cooking function. Two alarms (Timer 1 and 2) can be selected simultaneously. A maximum time of 59 minutes and 59 seconds can be selected.
Baking tips When baking meat or poultry, insert the grease filter in front of the fan opening. Remember to remove the grease filter from the fan opening when baking pastries. If the filter is not removed, increase the baking time. The roasting pan does not need to be greased or covered with parchment paper.
Page 30
Default temperature . . . 375 °F (190 °C) The "BAKE" function works by heating food from below. This is similar to the "bake mode" of a conventional oven. Use this function for: – boxed cake mixes, – baked apples, –...
CONVECTION BAKE Default temperature . . . 325 °F (160 °C) This function actively circulates heated air throughout the oven cavity for a consistent baking temperature. Use this function for: – cookies, cakes, – quick breads, – yeast breads, – cheesecakes, –...
Page 32
SURROUND Default temperature . . . 375 °F (190 °C) The "SURROUND" function is a premium conventional baking mode. The oven heats with both the upper and lower heating elements without the convection fan. Use this function for: – souffles, meringues, –...
Page 33
Default temperature . . . 325 °F (160 °C) The "INTENSIVE" function generates heat from the lower heating element. The oven’s fan gently circulates the heated air to create a brick oven (convection) environment. Use this function for: – pizza, –...
Default temperature . . . 325 °F (160 °C) This premium convection function heats the oven to a high temperature to sear the meat, retaining moisture and tenderness. Once the oven cavity temperature has exceeded the set temperature, "Searing"...
Default temperature . . . 325 °F (160 °C) This function uses the convection fan to actively circulate heated air throughout the oven. This function does not spike the oven temperature for searing. Use this function for: – chicken pieces, –...
Page 36
ROAST SURROUND ROAST Default temperature . . . 400 °F (200 °C) "SURROUND ROAST" is a conventional roasting program for traditional recipes. Use this function for: – pot roast, – brisket, – stew. The recommended position is the 2 runner from the bottom.
Roasting tips – Always install the grease filter in the back of the oven before roasting. – The larger the cut of meat to be roasted, the lower the temperature that should be used. The roasting process will take a little...
Make sure that the probe does not touch any bones and is not located in a fatty portion of the meat. Improper insertion of the probe could shut the oven off too early. ^ Put the meat into the oven.
Page 39
^ Insert the short end of the roast probe into the socket on the right side of the oven so it clicks into place. ^ Select a roasting function. For example, "AUTO ROAST".
Page 40
10 minutes. During this time, the core temperature will rise 5 - 10 degrees. If the temperature probe is left in the food at the end of the cooking process, the oven display will show the core temperature first increasing and then decreasing. AUTO ROAST 325°F...
When using the "MASTER CHEF" function to cook meat or poultry insert the grease filter in front of the fan opening. The "MASTER CHEF" function contains an easy to use list of preset functions of commonly cooked foods such as pizza, chicken and french fries.
Page 42
Convection Bake 320 °F (160 °C) and cook or brown it for a few more minutes. – After use let the oven cool to room temperature before using it again for an automatic program. – When cooking poultry like goose or turkey, set the weight of the unstuffed poultry.
BROIL BROIL When broiling (all Broil functions), insert the grease filter in front of the fan opening. No default temperature Only the inner part of the upper heating element is used for a smaller area of intense heat from above. This function is excellent for broiling or searing small quantities.
BROIL MAXI BROIL No default temperature The entire upper heating element is used for intense heating from above. This function gives excellent browning and searing results. Use this function for: – chops, ribs, – large quantities of meat, – browning large dishes. The recommended position is the 4 runner from the bottom.
Always insert the grease filter over the convection fan in the back of the oven when using this function. The roast probe can be used in this function to monitor the meat’s core temperature. Refer to "ROAST/ Using...
Page 47
ROTISSERIE No default temperature The "ROTISSERIE" function broils meat or poultry while turning it on a spit for even cooking results. Use this function for: – poultry, whole birds, – tied roasts, e.g. pork loin, beef tenderloin, etc., – kabobs. The roast probe cannot be used at the same time as the rotisserie.
Page 48
^ Assemble the rotisserie as shown. ^ Put the rotisserie in the oven, using the lowest level runner. ^ Insert the spits into the grill motors at the back of the oven.
Broiling tips – Always insert the grease filter in the back of the oven before broiling. – To ensure even cooking, it is best to broil foods of a similar thickness at the same time. Most items should be turned halfway through broiling.
"favorite" to memory. Your "favorite" can now be recalled from the "FAVORITES" list. When selected the oven will automatically use the saved settings. ^ Touch "Clear" to cancel the running function if you are not cooking.
"Off" control. At the end of Sabbath After 72 hours, the oven will shut off and "Fault 55" will appear in the display. ^ Turn the oven off to reset it to normal operation. SABBATH ( BAKE ( SURROUND...
For best results, blot food with a paper towel before dehydrating. Foods to be dehydrated should be placed directly on the oven racks or on a drying screen (not supplied with oven).
This function maintains a low temperature perfect for yeast to rise. Place the dough in a large bowl on the oven rack positioned at the lowest runner level. Keep the oven door closed during this process.
DEFROST DEFROST Default temperature ..75 °F (25 °C) This function allows you to defrost food at a constant temperature. Defrosting times depend on the type and weight of the food, and at what temperature it was deep-frozen. Defrosting tips –...
Appliance front The glass front of the appliance and the control area can be cleaned with glass cleaner when cool. Stainless steel Stainless steel surfaces can be cleaned using a non-abrasive stainless steel cleaner. To help prevent resoiling, a conditioner for stainless steel can also be used.
^ Do not use abrasive cleaners, ceramic cleaners, metal scourers, or oven cleaners on PerfectClean surfaces. ^ After cleaning, rinse thoroughly with water. The water should run off the surface easily, any residue will hinder this effect.
Do not use abrasive cleaning agents, hard brushes, metal scouring pads, steel wool, knives or other abrasive materials. Do not use oven sprays on any part of this oven. ^ Dry surfaces before reassembly. Cleaning...
Cleaning Removing the oven door Please note: The oven door is quite heavy. It should be gripped firmly at the sides when being removed or refitted. ^ Open the door fully. ^ Flip up the locking clamps on each door hinge.
Removing the runners ^ Turn the two screws, a, counterclockwise and remove. ^ Remove the runners, b, from the oven by pulling them away from the oven wall. Reassemble in the reverse order, ensuring all parts are correctly in place.
Cleaning Lowering the upper heating element ^ First remove the runners. ^ Loosen the wing nut. ^ Gently lower the upper heating element. Do not use force to lower it, as this could cause damage. ^ Reassemble in the reverse order, ensuring all parts are correctly in place.
SELF CLEAN function In the self cleaning function, the oven is heated to very high temperatures burning off any residue on the oven interior. The duration of the "SELF CLEAN" function will depend on the amount of soiling in the oven.
Page 62
Self Cleaning A film may build up on the oven door. This can be removed with a shielded blade scraper or a non-abrasive sponge and a mild solution of warm water and dish soap. The "SELF CLEAN" function will stop, if the oven interior is extremely soiled.
Changing the light bulb ^ Remove the runners. ^ Spread a dishtowel on the oven floor to protect the enamel, in case the light cover falls. ^ Insert the supplied slide opener...
Page 64
Changing the light bulb ^ Replace the halogen bulb. Only use the following light bulb: 12 V, 10 W, 572 °F (300 °C) heat resistant, socket G4, type 64418 made by Osram. Do not touch the new light bulb with your fingers;...
Why is a noise heard after turning the oven off? This is normal. The fan will continue to run for a short time to cool the oven. When the oven has cooled sufficiently, the fan will turn off automatically.
Miele’s Service department, Extended Service Contracts offered by other providers for Miele products will not be recognized by Miele. Our goal here is to prevent unauthorized (and untrained) service personnel from working on your Miele products, possibly doing further damage to them, you and/or your home.
Optional accessories The following accessories are available for purchase from your Local Miele Dealer or from Miele. Pizza pan This circular pan is suitable for cooking fresh or frozen pizzas, flat cakes, tarts, and baked desserts. Pizza stone The pizza stone is ideal for baking dishes with a crisp bottom like pizza and bread.
Caring for the environment Disposal of the packing materials The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
30 A circuit. Connection details are also given on the diagram located on the top of the oven. Data plate The silver data plate is located along the front side of the oven with the door open.
Appliance and Cut-out Dimensions a Vent cut-out (min. 24" / 150 cm ) possible at rear or platform of cabinet b Cut-out for power cord (min. 1" / 3 cm c Power cord For the most current specifications see the Miele website.
In addition, the oven vent at the bottom of the door (bottom of the lower door in a double oven) must not be obstructed.
Page 74
Pull the door upward. ^ Connect the oven to the electrical supply. ^ Slide the oven into the cabinet and align. ^ Reinstall the door. ^ Open the oven door and locate the two mounting screw holes in the oven frame.
Page 75
Set the time "Enter Time: hh:mm" will appear in the display once the oven is connected to electricity. ^ Set the current time using the keypad. ^ Save the time by touching the "OK" control. Installing the oven...
Page 76
Alteration rights reserved / 1107 M.-Nr. 06 426 290 / 08 (H 4880 BP) For the most updated manual see the Miele website.