Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Mitsubishi Electric SE1U
Summary of Contents for Mitsubishi Electric SE1U
- Page 1 LCD PROJECTOR MODEL SE1U User Manual...
-
Page 2: Important Safeguards
Do not block these openings or allow them to be blocked by placing the projector on a bed, sofa, rug, or bookcase. Ensure that there is adequate ventilation and that the manufacturer’s instructions have been adhered to. - Page 3 Do not touch them or put other equipment close to the air outlet grilles because they become hot during operation. The heated air outlet grilles and bottom plate may cause injury or damage to other equipment. Also, do not put the projector on a desk that is easily affected by heat.
-
Page 4: About Lamp
• Do not touch the lamp directly. It may break and cause injury or burn. • Be sure not to drop the lamp lid screw into the projector. Also be sure not to put metal or any flammable objects inside because it may cause fire or electric shock. If any objects should fall inside, unplug and contact your dealer. -
Page 5: Label Locations
If this happens, move it away from the TV or radio. Moving the projector from a low-temperature room to a high-temperature room may cause condensation on the lens or internal parts in the instrument. If you continue to use it in that situation, the malfunction may result. -
Page 6: Exemption Clauses
LCD projector. Model No. Serial No. Retain this information for future reference. Declaration of Conformity Model Number : SE1U Trade Name : MITSUBISHI ELECTRIC Responsible party : Mitsubishi Digital Electronics America, Inc. 9351 Jeronimo Road, Irvine, CA 92618 U.S.A... -
Page 7: Table Of Contents
CONTENTS Before Using IMPORTANT SAFEGUARDS ... 3 ABOUT LAMP ... 7 ABOUT REMOTE BATTERIES ... 7 LABEL LOCATIONS ... 8 POWER SUPPLY CORD SELECTION ... 9 IMPORTANT PRECAUTIONS ... 9 EXEMPTION CLAUSES ... 11 OTHER CAUTIONS AND INFORMATIONS ... 11 CONTENTS ... -
Page 8: Preparations
: Adjusts the vertical projection angle. p.23 : Operates the projector. p.16 : Expels air that has grown hot inside the projector. : Plays audio. : Attach a security chain, etc. here. : Feeds the audio signal from a computer or video equipment. -
Page 9: Names Of Each Part On The Control Panel And Remote Control
I Operating the remote control Point the remote control toward the projector’s infrared remote sensor, and press a button on the remote control. • Operating the projector from the front Approx. 15° • Operating the projector from the rear Approx. 15°... -
Page 10: Placement
• Always obey the instructions listed in IMPORTANT SAFEGUARDS when placing the unit. • If you wish to mount the projector on the ceiling, be sure to ask your dealer to do so. Mounting the projector on a ceiling requires special ceiling brackets and specialized knowledge. -
Page 11: Operations
You can also configure the start-up screen not to appear via the Display setting menu p.31 • The first time you use the projector after purchase, after the start-up screen disappears, the p.22 Language menu is displayed I Turning the power off Press the ON/STANDBY button. -
Page 12: Basic Operations
Select the language and the lamp power (When using the first time). When the projector is used for the first time after purchase, menu for language and lamp power selection and configuration is displayed in English. (If the screen is out of... -
Page 13: Using Handy Features
NTSC/PAL/SECAM/PAL-N/PAL-M/PAL60/NTSC4.43 Note • Moving pictures generated with the DVD software for computers may appear unnatural if it is projected with this projector, but it is not a malfunction. I Correcting the keystone distortion (Keystone) When the foot adjuster Remote... -
Page 14: Cutting Off The Picture And Sound Temporarily (Mute)
• The still function can be used on the Expand function. Other operations will release the still. • Even if an image is frozen on the projector, the pictures are running on the video or other equipment. • If you use this function on video soft sold on the market, broadcast or broadcast on cable except for the purpose of your private viewing and listening, it may infringe the copyright protected by the copyright laws. -
Page 15: Displaying Information [Status Display]
When the displayed time approaches 2,000 hours, consult with a store about getting aVLT-SE1LP replacement lamp (sold separately) prepared. 5: [Version] shows the version of the projector’s internal control program. This version is referred to for customer service, etc. Notes •... -
Page 16: The Image Adjustment Menu
• Note that if Power on is set to Auto, then if the AC power cord is plugged in when power is restored after a power outage, the projector power will come on. • Even if Power on is set to Auto, press the ON/STANDBY button to turn off the power. -
Page 17: Maintenance
• When replacing, always use lamp “VLT-SE1LP ” (sold separately). CAUTION • If you have been using the projector, the lamp will be very hot, and may cause burn injuries. Wait for the lamp to cool (for longer than 1 hour) before replacing it. -
Page 18: Others
⇒ Internal overheating, or the outside temperature is too high. (Red lit) • Place the projector so that the air intake and exhaust are not blocked. • Unplug the AC power cord and wait for a short while, then turn the power back on. -
Page 19: Before Calling Service Personnel
Please see “Trouble indications” p.35 as well. If This Happens Check • Is the AC power cord plugged in? Is it connected to the projector? No power p.35 • Is the lamp cover loose? Power goes out • Is the ambient temperature high? p.35... -
Page 20: B /P R
I List of supported signals (RGB signals) This projector supports the following RGB signals. Note, however, that depending on the computer model, the screen may show flicker or streaking. Please adjust the projector if this happens. (Press the AUTO POSITION button, and adjust automatically or manually. -
Page 21: Serial Terminal
Acknowledge ACK (06h) CR (0Dh) Data ACK (06h) ESC (1Bh) No acknowledge NAK (15h) If commands are to be sent consecutively, wait for the response from the projector before sending the next command. G Main Commands Item Command Power on...