Toshiba Tecra A3 Series Resource Manual page 34

Hide thumbs Also See for Tecra A3 Series:

Table of Contents

Setting up your computer and getting started

Hold the memory module by its edges so that the gold

connector bar faces the slot, fit the module into the

socket.

10 Gently press down on the memory module connector

until the clips snap into place.

Do not force the memory module into position. The

memory module should be level when secured in place.

Sample inserting the sample memory module into the slot

The clips on either side of the module clicks to secure the

memory module.

11 Replace the memory module slot cover and secure it to

the computer with the screw.

12 Turn the computer over and reconnect any cables you

removed.

13 Restart the computer.

14 To verify that the computer correctly recognizes the

memory module:

Avoid touching the connectors on the memory module or on the

computer. Grease or dust on the connectors may cause memory

access problems.

Click Start, then click Control Panel.

Click Performance and Maintenance.

Click System.

The General tab view automatically appears and

shows the recognized memory.

Table of Contents