Installing The Pcie Expansion Card; Removing The Power Supply Unit (Psu) - Dell Vostro 3560 Owner's Manual
Hide thumbs
Also See for Vostro 3560:
- Service manual (113 pages) ,
- Owner's manual (71 pages) ,
- Setup and specifications (25 pages)
Table of Contents
Advertisement
Installing the PCIe expansion card
1.
Pull the release latch to open it.
2.
Insert the PCIe expansion card to the connector on the system board.
3.
Secure the PCIe expansion card by pushing the card retention latch until it clicks into place.
4.
Close the release latch.
5.
Close the front bezel door.
6.
Install the:
a.
bezel
b.
cover
7.
Follow the procedure in
Removing the power supply unit (PSU)
1.
Follow the procedure in
2.
Remove the:
•
cover
•
bezel
3.
Open the
front bezel
4.
To remove the PSU:
a. Remove the screws that secure the PSU to the computer [1].
b. Disconnect the PSU cables from the connectors on the system board [2, 3].
c. Unroute the PSU cables from the retention clips.
d. Press the metal release tab [4], slide and lift the PSU out of the computer [5].
After Working Inside Your
Before Working Inside Your
door.
Computer.
Computer.
15
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
