hit counter script
Makita DBN500 Instruction Manual

Makita DBN500 Instruction Manual

Cordless brad nailer
Hide thumbs Also See for DBN500:

Advertisement

INSTRUCTION MANUAL
Cordless Brad Nailer
DBN500
014580
IMPORTANT: Read Before Using.
1

Advertisement

Table of Contents
loading

Summary of Contents for Makita DBN500

  • Page 1 INSTRUCTION MANUAL Cordless Brad Nailer DBN500 014580 IMPORTANT: Read Before Using.
  • Page 2: Specifications

    ENGLISH (Original instructions) SPECIFICATIONS Model DBN500 Brad nail size 18 Ga x 15, 20, 25, 30, 32, 35, 38, 40, 45, 50 mm Brad nail magazine capacity 100 pcs Dimensions (L x W x H) 294 mm x 97 mm x 318 mm Rated voltage D.C.
  • Page 3: General Power Tool Safety Warnings

    EC Declaration of Conformity Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and Makita declares that the following Machine(s): refrigerators. There is an increased risk of Designation of Machine: electric shock if your body is earthed or grounded.
  • Page 4 16. If devices are provided for the connection of 27. Under abusive conditions, liquid may be dust extraction collection facilities, ejected from the battery; avoid contact. If ensure these are connected and properly contact accidentally occurs, flush with water. used. Use of dust collection can reduce dust- If liquid contacts eyes, additionally seek medical help.
  • Page 5 ENC007-9 Make sure no one is nearby before operation. Never attempt to drive fasteners from both the IMPORTANT SAFETY inside and outside of wall at the same time. INSTRUCTIONS Fasteners may rip through and/or fly off, presenting a grave danger. FOR BATTERY CARTRIDGE 12.
  • Page 6: Functional Description

    FUNCTIONAL DESCRIPTION 1. Battery indicator CAUTION: Always be sure that the tool is switched off and the • battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge 014584 1. Red indicator Overheat protection for tool 2.
  • Page 7: Adjusting The Nailing Depth

    Press the check button on the battery cartridge to Nailing mode selection indicate the remaining battery capacity. The indicator lamps light up for few seconds. 1. Mode selecting button 2. Sequential Indicator lamps mode Remaining 3. Continuous capacity mode Lighted Blinking 75% to 100% 50% to 75%...
  • Page 8 To turn on the lamp, pull the trigger or place the contact 1. Nails element against the workpiece. Release the trigger or 2. Slide door contact element to turn it off. 3. Driver guide The lamp goes out 10 seconds after releasing the trigger or contact element from the workpiece.
  • Page 9: Driving Nails

    This tool stops automatically under the following • order before each operation. If you find issues conditions: described below, ask Makita Authorized Service − If you release the trigger or contact element from Centers for repairs. workpiece before the tool finishes the operation Before installing the battery cartridge into the tool, •...
  • Page 10: Maintenance

    Anti dry fire mechanism This tool is equipped with an anti dry fire mechanism. It automatically stops driving nails when the remaining nails finish. In this case, load more nails to resume Humid operation. Removing jammed nails Nail WARNING: Always make sure that the trigger is released, and 004311 •...
  • Page 11: Optional Accessories

    Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Nails • Makita genuine battery and charger • Safety goggles •...
  • Page 12 Makita Jan-Baptist Vinkstraat 2, 3070, Belgium Makita Corporation Anjo, Aichi, Japan www.makita.com 885334A226...

Table of Contents

Save PDF