Table of Contents
Advertisement
Available languages
Available languages
Other Functions
(VIDEO 2/BACK CAMERA INPUT jack) when
a rear view camera is installed on your vehicle.
When the gear shift is in REVERSE (R) posi-
tion, the video automatically switches to a rear
view camera video. (For more details, consult
your dealer.)
! Confirm the setting immediately whether
the display changes to a rear view camera
video when the gear shift is moved to RE-
VERSE (R) from another position.
! When the display changes to a rear view
camera video during normal drivings,
switch to another setting.
! To return to the source display, press
V.ADJ.
1
Use a, b, c, d and A.MENU to select
AV INPUT2.
2
Press c or d to select B. CAMERA.
3
Press b to select POLARITY.
4
Press c or d to select an appropriate
setting for polarity.
Each press of c or d switches between the
following polarity:
! BATTERY When the polarity of the con-
nected lead is positive while the gear shift
is in REVERSE (R) position
! GND When the polarity of the connected
lead is negative while the gear shift is in RE-
VERSE (R) position
Switching the warning tone
If the front panel is not detached from this
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn
off the warning tone.
1
Use a, b, c, d and A.MENU to select
DT. WARNING.
2
Press a to turn warning tone on.
# To turn warning tone off, press b.
Setting the automatic open
function
To prevent the display from hitting the shift
lever of an automatic vehicle when it is in P
(park) position, or when you do not wish the
display to open/close automatically, you can
set the automatic open function in the manual
mode.
Furthermore, to adjust the LCD panel slide po-
sition, you can turn the set back on or off.
1
Use a, b, c, d and A.MENU to select
FLAP SET.
2
Press a and the LCD panel slides to the
back.
# Press b and the LCD panel slides to the front.
3
Press c or d to select the display to
open/close automatically or manually.
Press c to select MANUAL, and you have to
press OPEN/CLOSE to open/close the display.
Press d to select AUTO, and the display auto-
matically opens/closes when power to this
unit is turned on.
Setting the clock
Use these instructions to set the clock.
1
Use a, b, c, d and A.MENU to select
CLOCK ADJ.
2
Press c or d to select OFF and then
press A.MENU to turn the clock display on.
ON will appear in the display instead of OFF.
Clock display is now on.
Section
05
13
En
Advertisement
Chapters
Table of Contents
