Installing The Keyboard; Removing The Palmrest - Dell Latitude E7240 Owner's Manual
Hide thumbs
Also See for Latitude E7240:
- Owner's manual (59 pages) ,
- Setup and features information (12 pages) ,
- Setup & features manual (7 pages)
Table of Contents
Advertisement
Installing the Keyboard
1.
Connect the keyboard cable and tighten the screw that secures the keyboard to the computer.
2.
Slide the keyboard into its compartment and ensure that it clicks into place.
3.
Flip the computer, place the keyboard, and tighten the screws that secure the keyboard to the
computer.
4.
Install:
a. keyboard trim
b. base cover
c. battery
5.
Follow the procedures in After Working Inside Your Computer.
Removing the Palmrest
1.
Follow the procedures in Before Working Inside Your Computer.
2.
Remove:
a. SD card
b. battery
c. base cover
d. keyboard trim
e. keyboard
3.
Remove the screws that secure the palmrest assembly and flip the computer.
4.
Perform the following steps as shown in the illustration:
a. Disconnect the cable from the computer.
b. Lift the latch that secures the keyboard cable to the computer [1].
c. Disconnect the keyboard cable [2].
d. Disconnect the touch cable from the computer [3].
e. Unroute the cables from the slot [4].
16
- Quick Links:
- Specifications
Hide quick links:
Advertisement
Table of Contents
