The information in this document does not alter the terms of your purchase agreement or the Lenovo Limited Warranty. For more information, see “Warranty Information” in the Safety, Warranty, and Setup Guide that comes with your computer.
Note: If you notice these conditions with a product (such as an extension cord) that is not manufactured for or by Lenovo, stop using that product until you can contact the product manufacturer for further instructions, or until you get a suitable replacement.
Although there are no moving parts in your computer after the power cord has been disconnected, the following warnings are required for your safety. CAUTION: Hazardous moving parts. Keep fingers and other body parts away. CAUTION: Before you open the computer cover, turn off the computer and wait several minutes until the computer is cool.
Batteries supplied by Lenovo for use with your product have been tested for compatibility and should only be replaced with approved parts. A battery other than the one specified by Lenovo, or a disassembled or modified battery is not covered by the warranty.
• Do not operate your computer inside furniture, as this might increase the risk of overheating. • Airflow temperatures into the computer should not exceed 35°C (95°F). Electrical current safety information DANGER Electric current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: •...
50332-2 can be dangerous due to excessive sound pressure levels. If your Lenovo computer came with headphones or earphones in the package, as a set, the combination of the headphones or earphones and the computer already complies with the specifications of EN 50332-1.
“Specifications” on page 11 • “Operating environment” on page 11 • “Lenovo programs” on page 12 Locating computer controls, connectors, and indicators This section introduces the computer hardware features to give you the basic information you need to start using the computer.
Note: Use Lenovo programs for advanced power settings. • For Windows 7: Use the Power Manager program. • For Windows 8.1: Use the Lenovo Settings program. For more information, see “Lenovo programs” on page 12. Fingerprint reader (available on some models) Fingerprint authentication provides simple and secure user access by associating your fingerprint with your passwords.
Right-side view Figure 2. Right-side view SIM-card slot (available on some models) USB 3.0 connectors ® Mini DisplayPort connector Ethernet connector Video graphics array (VGA) connector Security-lock slot SIM-card slot If your computer supports the wireless Wide Area Network (wireless WAN) feature, a Subscriber Identification Module (SIM) card might be required to establish wireless WAN connections.
Note: You are responsible for evaluating, selecting, and implementing the locking device and security feature. Lenovo makes no comments, judgments, or warranties about the function, quality, or performance of the locking device and security feature.
Page 21
7: Start the Power Manager program, click the Global Power Settings tab, and then follow the instructions on the screen. • For Windows 8.1 and Windows 10: Start the Lenovo Settings program, click Power, and then follow the instructions on the screen.
Bottom view Figure 4. Bottom view Battery Docking station connector (available on some models) Keyboard drainage holes Speakers Battery Use your computer with battery power whenever ac power is unavailable. Docking station connector (available on some models) You can use the connector to connect the computer to a supported docking station to extend the computer capabilities when you are at the office or at home.
Fn Lock indicator The Fn Lock indicator shows the status of Fn Lock function. For more information, see “Special keys” on page 17. Speaker-mute indicator When the speaker-mute indicator is on, the speakers are muted. Microphone-mute indicator When the microphone-mute indicator is on, the microphones are muted. Camera-status indicator When the camera-status indicator is on, the camera is in use.
Machine type and model label The machine type and model label identifies your computer. When you contact Lenovo for help, the machine type and model information helps support technicians to identify your computer and provide faster service. The following illustration shows the location of the machine type and model of your computer.
Lenovo. Note: Do not remove or replace a preinstalled wireless module by yourself. For module replacement, you must contact Lenovo service first. Lenovo is not responsible for any damage caused by unauthorized replacement. • For a user-replaceable wireless WAN module, this label directs you to consult this user guide for the actual FCC ID and IC certification number.
• In other countries and regions, the Genuine Microsoft label is required only on computer models licensed for Windows 8.1 Pro or Windows 10 Pro. The absence of a Genuine Microsoft label does not indicate that the preinstalled Windows version is not genuine.
Your computer comes with Lenovo programs to help you work easily and securely. Note: The available programs are subject to change without notice. To learn more about the programs and other computing solutions offered by Lenovo, go to: http://www.lenovo.com/support Accessing Lenovo programs To access Lenovo programs on your computer, do the following: •...
Some Lenovo programs are ready to be installed. You cannot find these programs through the above methods unless you have installed them first. To install these Lenovo programs, go to Lenovo PC Experience ➙ Lenovo Tools and follow the instructions on the screen.
Page 30
Lenovo PC Experience The Lenovo PC Experience program helps you work more easily and securely by providing easy access to various programs, such as Active Protection System (Windows 7, Windows 8.1, and and Lenovo Solution Center. Windows 10) Lenovo Settings...
“Using a flash media card or a SmartCard” on page 34 Registering your computer When you register your computer, information is entered into a database, which enables Lenovo to contact you in case of a recall or other severe problem. In addition, some locations offer extended privileges and services to registered users.
Page 32
• For Windows 7: Open the Start menu, then click Shut down. • For Windows 8.1: Do one of the following: – Go to the Start screen by pressing the Windows key, click the power icon in the top-right corner of the screen, then click Shut down.
On the Windows 8.1 operating system, you can set the computer to open either the desktop or the Start screen by default. To set the default startup screen, do the following: 1. On the desktop, move your pointer to the taskbar at the bottom of the screen and right-click on the taskbar.
Page 34
The keyboard has several function keys, which consist of the Fn key and the other function keys You can configure the Fn key and function keys in the Keyboard Properties window by doing the following: 1. Go to Control Panel, then change the view of Control Panel from Category to Large icons or Small icons. 2.
• : Manage external displays. • : Enables or disables the wireless features. For more information on the wireless features, refer to “Wireless connections” on page 28. • For Windows 7: Opens Control Panel. For Windows 8.1: Opens the Settings charm. For Windows 10: Opens the Settings window.
The ThinkPad pointing device consists of the following two devices: TrackPoint pointing device Trackpad By default, both the TrackPoint pointing device and the trackpad are active with the touch gestures enabled. To change the settings, see “Customizing the ThinkPad pointing device” on page 23. TrackPoint pointing device The TrackPoint pointing device enables you to perform all the functions of a traditional mouse, such as pointing, clicking, and scrolling.
• Point Use the pointing stick to move the pointer on the screen. To use the pointing stick, apply pressure to the pointing-stick nonslip cap in any direction parallel to the keyboard. The pointer moves accordingly but the pointing stick itself does not move. The speed at which the pointer moves depends on the amount of pressure you apply to the pointing stick.
With the trackpad, you also can perform a variety of touch gestures. For information about using the touch gestures, see “Trackpad touch gestures” on page 22. Trackpad touch gestures The entire trackpad surface is sensitive to finger touch and movement. You can use the trackpad to perform the same point and click actions as you would using a traditional mouse.
After you use the cap for a period of time, you might consider replacing the cap with a new one. To get a new cap, contact Lenovo. For information about contacting Lenovo, see Chapter 11 “Getting support” on page 145.
Power management When you use your computer away from electrical outlets, you depend on battery power to keep your computer running. Different computer components consume power at different rates. The more you use the power-intensive components, the faster you consume battery power. Spend more time unplugged with ThinkPad batteries.
– When the battery icon in the Windows notification area shows a low percentage of battery power remaining. – When the batteries have not been used for a long time Checking the battery status Move your pointer to the battery-status icon in the Windows notification area to check the battery status. The battery-status icon displays the percentage of battery power remaining and how long you can use your computer before you must charge the battery.
To turn off the wireless features, press the wireless-radios control key Handling the battery This system supports only batteries specially designed for this specific system and manufactured by Lenovo or an authorized builder. The system does not support unauthorized batteries or batteries designed for other...
Page 43
Note: If an unauthorized battery is installed, the following message will be displayed: “The battery installed is not supported by this system and will not charge. Please replace the battery with the correct Lenovo battery for this system.”...
DANGER Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply with local ordinances or regulations and your company's safety standards. DANGER There is a danger of an explosion if the coin-cell battery is incorrectly placed. The lithium battery contains lithium and can explode if it is not properly handled, or disposed of.
Page 45
Your computer comes with a built-in wireless network card and a configuration utility to help you establish wireless connections and monitor the connection status. This enables you to stay connected to your network while you are at the office, in a meeting room, or at home, with no need for a wired connection. To establish a wireless-LAN connection, do the following: 1.
Page 46
• Power to the wireless radio is on. No signal. • Power to the wireless radio is on. The signal strength of the wireless connection is excellent. • Power to the wireless radio is on. The signal strength of the wireless connection is marginal. •...
Wireless status icon status: • Power to the WAN radio is off • No association • No signal • Weak signal • Medium signal • Strong signal Using the Bluetooth connection Bluetooth can connect devices a short distance from one another, and is commonly used for connecting peripheral devices to a computer, transferring data between hand-held devices and a personal computer, or remotely controlling and communicating with devices such as mobile phones.
Click Connect. Select the desired wireless display and follow the instructions on the screen. For more information, see the help information systems of the Lenovo QuickDisplay program and the Windows 8.1 operating system. Choosing a display mode You can display your desktop and apps on the computer display, the external display, or both.
There are four display modes: • Disconnect: Displays the video output only on your computer screen. Note: Depending on the situation, you might see Disconnect, PC screen only, Computer only, or Disconnect projector. • Duplicate: Displays the same video output on both your computer screen and an external display. •...
– Configure the camera settings directly from the program that is using the camera. For details, see the help information system of the program. – Click Lenovo Settings from the Start screen. Then click Camera. Follow the instructions on the screen to configure the camera settings as desired.
If your computer has a media card reader slot, it supports the following cards: • MultiMediaCard (MMC) • Secure Digital eXtended-Capacity (SDXC) card • Secure Digital (SD) card • Secure Digital High-Capacity (SDHC) card Note: Your computer does not support the content protection for recordable media (CPRM) feature for the SD card.
3. Click Device Manager. If you are prompted for an administrator password or confirmation, type the password or provide confirmation. 4. From the Action menu, select Add legacy hardware. The Add Hardware Wizard starts. 5. Follow the instructions on the screen. Removing a flash media card or a SmartCard Attention: •...
You can shop at Lenovo 24 hours a day, 7 days a week directly over the World Wide Web. All you need is an Internet connection and a credit card.
Page 54
ThinkPad Basic Dock Front view Power button: Press the power button to turn on or turn off the computer . Eject button: Press the eject button to release the computer from the docking station. Sliding adjuster: Use the sliding adjuster as a guide to align the docking station connector on your computer when you attach the docking station.
Page 55
Ethernet connector: Used to connect the docking station to an Ethernet LAN. Note: If you need to use an Ethernet connector or an external monitor connector when your computer is attached to a docking station, use the Ethernet connector or the external monitor connector on the docking station, instead of the one on the computer.
Page 56
Rear view Always On USB connector: Used to connect devices that are compatible with USB 2.0 or charge some mobile digital devices and smartphones when your computer is in sleep or hibernation mode. USB 2.0 connectors: Used to connect devices that are compatible with USB 2.0. USB 3.0 connectors: Used to connect devices that are compatible with USB 3.0.
Page 57
Security-lock slot: To protect your docking station from theft, you can use a security cable lock, such as a Kensington-style cable lock, that fits this security-lock slot to lock your docking station to a desk, table, or other non-permanent fixture. ThinkPad Ultra Dock Front view Power button: Press the power button to turn on or turn off the computer.
Page 58
Rear view Always On USB connector: Used to connect devices that are compatible with USB 2.0 or charge some mobile digital devices and smartphones when your computer is in sleep or hibernation mode. USB 2.0 connectors: Used to connect devices that are compatible with USB 2.0. USB 3.0 connectors: Used to connect devices that are compatible with USB 3.0.
Security-lock slot: To protect your docking station from theft, you can use a security cable lock, such as a Kensington-style cable lock, that fits this security-lock slot to lock your docking station to a desk, table, or other non-permanent fixture. Attaching a ThinkPad docking station To attach your computer to a supported ThinkPad docking station, do the following: Note: The ThinkPad Basic Dock does not have the system lock.
Detaching a ThinkPad docking station To detach your computer from a ThinkPad docking station, do the following: Note: The ThinkPad Basic Dock does not have the system lock. 1. Disconnect all cables and devices from the computer. 2. Ensure that the system lock key is turned to the unlocked position (horizontal). 3.
For the ThinkPad Ultra Dock, if you connect two external displays to the DisplayPort connector and the HDMI connector, the HDMI connector is inactive. Security features The system lock key has two positions as shown in the drawing. The security feature is different when the key is in different positions: •...
The following topics provide information about arranging your work area, setting up your computer equipment, and establishing healthy work habits. Lenovo is committed to providing the latest information and technology to our customers with disabilities. Refer to the accessibility information that outlines our efforts in this area. See “Accessibility information”...
Accessibility information Lenovo is committed to providing users who have hearing, vision, and mobility limitations with greater access to information and technology. This section provides information about the ways to help these users get the most out of their computer experience. You also can get the most up-to-date accessibility information from the following Web site: http://www.lenovo.com/accessibility...
Page 65
Keyboard shortcut Function Shift five times Turn on or turn off Sticky Keys Num Lock for five seconds Turn on or turn off Toggle Keys Left Alt+Left Shift+Num Lock Turn on or turn off Mouse Keys Left Alt+Left Shift+PrtScn (or PrtSc) Turn on or turn off High Contrast For more information, go to http://windows.microsoft.com/, and then type any of the following keywords for searching: keyboard shortcuts, key combinations, shortcut keys.
Page 66
To use Speech Recognition, do the following: 1. Go to Control Panel, and ensure that you view Control Panel by Category. 2. Click Ease of Access ➙ Speech Recognition. 3. Follow the instructions on the screen. Screen-reader technologies Screen-reader technologies are primarily focused on software program interfaces, help information systems, and various online documents.
ThinkPad docking stations” on page 37. Documentation in accessible formats Lenovo provides electronic documentation in accessible formats, such as properly tagged PDF files or HyperText Markup Language (HTML) files. Lenovo electronic documentation is developed to ensure that visually impaired users can read the documentation through a screen reader. Each image in the documentation also includes adequate alternative text so that visually impaired users can understand the image when they use a screen reader.
Page 68
• A quality carrying case that provides adequate cushion and protection • External storage device If you are traveling to another country, you might want to consider an ac power adapter for the country to which you are travelling. To purchase travel accessories, go to http://www.lenovo.com/accessories. User Guide...
Note: You might want to record your password and store it in a safe place. Otherwise, if you forget the password, you have to take your computer to a Lenovo reseller or a marketing representative to have the password canceled.
ThinkPad Setup program, you will be prompted to type your supervisor password to proceed. If you forget your supervisor password, Lenovo cannot reset your password. You must take your computer to a Lenovo reseller or a Lenovo marketing representative to have the system board replaced. Proof of purchase is required, and a fee will be charged for parts and service.
Page 72
The master hard disk password also requires a user hard disk password. The master hard disk password is usually set and used by a system administrator. It enables the administrator to access any hard disk drive in a system like a master key. The administrator sets the master password; then assigns a user password for each computer in the network.
Lenovo cannot reset your passwords or recover data from the hard disk drive. You must take your computer to a Lenovo reseller or a marketing representative to have the hard disk drive replaced. Proof of purchase is required, and a fee will be charged for parts and service.
• Set a power-on password as well as a hard disk password for your internal storage drive. Refer to the procedures in “Power-on password” on page 53 and “Hard disk passwords” on page 55. For security, a longer password is recommended. •...
To set the security chip, you have to start Client Security Solution, and follow the instructions on the screen. Note: If Client Security Solution is not preinstalled on your computer, download and install it from http://www.lenovo.com/support. Then follow the instructions on the screen. Tips on using the security chip •...
Page 76
• For Windows 7 and Windows 8.1 1. Start the Fingerprint Manager Pro program. For instructions on how to start the Fingerprint Manager Pro program, see “Lenovo programs” on page 12. 2. Enter the Windows password as required. 3. Click the icon for the finger that you want to enroll, and constantly swipe your corresponding finger across the fingerprint reader until the enrollment completes.
Page 77
Swiping your finger over the fingerprint reader To swipe your finger over the reader, do the following: 1. Place the top joint of your finger on the sensor. 2. Apply light pressure and swipe your finger toward you across the reader in one smooth motion. Do not lift your finger when you are swiping it.
• Delete the data. • Format your storage drive, using the software for initializing it. • Use the recovery program provided by Lenovo to bring the storage drive back to the factory default settings. These operations, however, only change the file location of the data; they do not delete the data itself. In other words, the data retrieval processing is disabled under an operating system such as Windows.
Lenovo provides a full version of antivirus software on your computer with a free 30-day subscription. After 30 days, you must renew the license to continue receiving the antivirus software updates.
7. After installing the device drivers, apply Windows Update to get the latest modules, for example the security patches. 8. Depending on your preference, install Lenovo programs. For information about Lenovo programs, see “Lenovo programs” on page 12. Note: After installing the operating system, do not change the initial UEFI/Legacy Boot setting in the ThinkPad Setup program.
USB 3.0 driver. To download the latest device drivers, do the following: 1. Go to http://www.lenovo.com/ThinkPadDrivers. 2. Select your product name to view all the device drivers for your computer. 3. Select the device drivers you that you need, and follow the instructions on the screen.
Note: You can press the F9 key to restore to the default settings. Main menu When you enter the ThinkPad Setup program, you will first see the Main menu as follows: • UEFI BIOS Version • UEFI BIOS Date (Year-Month-Day) •...
Page 85
Table 2. Config menu items (continued) Menu item Submenu item Selection Comments • The magic packet type Wake on LAN requires ac power. • The Wake on LAN function does not work when a hard disk password is set. Ethernet LAN Option ROM •...
Page 86
Table 2. Config menu items (continued) Menu item Submenu item Selection Comments If you select Enabled, it enables USB 3.0 mode and allows USB 3.0 to be supported in the operating system. If you select Disabled, it disables and hides the USB 3.0 controller, and USB 3.0 connectors will work as USB 2.0 connectors.
Page 87
Table 2. Config menu items (continued) Menu item Submenu item Selection Comments desired function key. The action is equivalent to pressing the required key simultaneously with the Fn key. When you press the Fn key twice, the state is locked until you press the Fn key again.
Page 88
Table 2. Config menu items (continued) Menu item Submenu item Selection Comments • Balanced Balanced: Balance sound, temperature, and performance. Note: Each scheme affects fan sound, temperature, and performance. • Disabled Enable or disable the CPU Power Management power-saving feature that •...
Page 89
Table 2. Config menu items (continued) Menu item Submenu item Selection Comments Beep and Alarm Password Beep • Disabled Enable this option to have a beep sound when the • Enabled system is waiting for a power-on, hard disk, or supervisor password.
Table 2. Config menu items (continued) Menu item Submenu item Selection Comments should match the Intel AMT • VT-UTF8 remote console. Intel NFF Intel NFF control • Disabled This option enables or disables the Intel Network • Enabled Frame Forwarder (NFF) function.
Page 91
Table 3. Security menu items (continued) Menu item Submenu item Selection Comments Password at Unattended • Disabled If you select and enable boot Password at unattended • Enabled boot, a password prompt is displayed when the computer is turned on, from either a power-off state or hibernation state.
Page 92
Table 3. Security menu items (continued) Menu item Submenu item Selection Comments Hard Disk X Password • Disabled Refer to “Hard disk passwords” on page • Enabled Security Chip Security Chip • Active If you select Active, the security chip is functional. •...
Page 93
Table 3. Security menu items (continued) Menu item Submenu item Selection Comments UEFI BIOS Update Option Flash BIOS Updating by • Disabled If you select Enabled, End-Users all users can update the • Enabled UEFI BIOS. If you select Disabled, only the person who knows the supervisor password can update the UEFI BIOS.
Page 94
Table 3. Security menu items (continued) Menu item Submenu item Selection Comments Memory Card Slot • Disabled If you select Enabled, you can use the memory card • Enabled slots. Integrated Camera • Disabled If you select Enabled, you can use the integrated •...
Table 3. Security menu items (continued) Menu item Submenu item Selection Comments Restore Factory keys • Yes This option is used to restore all keys and • No certificates in Secure Boot databases to factory defaults. Any customized Secure Boot settings will be erased, and the default platform key will be re-established along with...
Page 96
Table 4. Startup menu items Menu item Selection Comments Boot Select the boot device when you press the power button to turn on the computer. Network Boot Select the boot device when the computer wakes from LAN. If Wake On LAN is enabled, a network administrator can turn on all of the computers in a LAN remotely by use of network management software.
Windows environment. When you install a new program, a device driver, or hardware, you might be informed to update the UEFI BIOS. For instructions on how to update the UEFI BIOS, go to: http://www.lenovo.com/ThinkPadDrivers Using system management This topic is primarily intended for the network administrators.
Wake on LAN The network administrator can turn on a computer from a management console by using the Wake on LAN feature. When the Wake on LAN feature is enabled, many operations, such as data transfer, software updates, and Flash updates of the UEFI BIOS, can be done remotely without remote attendance. The updating process can perform after normal working hours and on weekends, so that the users are not interrupted during work, and the LAN traffic is kept to a minimum.
Page 99
Checking the requirements for flash updates A network administrator can update the programs on your computer from a management console, if the following requirements are met: • The computer must be started over LAN. • The computer must be engaged in the Preboot eXecution Environment (PXE). •...
• Profile your machine at http://www.lenovo.com/support to keep up to date with current drivers and revisions. • Keep up to date for device drivers on other non-Lenovo hardware. You might want to read the device driver information release notes prior to updating for compatibility or known issues.
This might eliminate the driver as the potential cause of a problem. Getting the latest drivers from the Web site You can download and install updated device drivers from the Lenovo Web site by doing the following: 1. Go to http://www.lenovo.com/ThinkPadDrivers.
scheduled updates to search by severity (critical updates, critical and recommended updates, or all updates) so the list you choose from contains only those update types that are of interest to you. For more information about how to use the System Update program, refer to the help information system of the program.
Taking care when setting passwords • Remember your passwords. If you forget a supervisor or hard disk password, Lenovo will not reset it, and you might have to replace your system board or storage drive. Taking care of the fingerprint reader The following actions could damage the fingerprint reader or cause it not to work properly: •...
Page 105
8. Wipe the surface again with a dry, soft, lint-free cloth. 9. Wait for the surface to dry completely and remove any fibers from the cloth. Cleaning your computer keyboard To clean the computer keyboard, do the following: 1. Apply some isopropyl rubbing alcohol to a soft, dust-free cloth. Note: Avoid spraying cleaner directly onto the keyboard.
When you are setting up your computer, the Lenovo Solution Center program prompts you to create recovery media. You can use the recovery media to restore the hard disk drive or hybrid drive to the factory default state.
2. While the computer is turned off, remove all power sources from the computer (battery and the ac power adapter). Hold down the power button for 10 seconds. Plug in the ac power adapter while keeping the battery out of the computer. If the computer does not turn back on, continue with step 3. Note: Once the computer starts up and enters the Windows environment, use the proper shutdown procedure to turn the computer off.
Page 109
• Message: 0187: EAIA data access error. Solution: The access to EEPROM is failed. Have the computer serviced. • Message: 0188: Invalid RFID Serialization Information Area. Solution: The EEPROM checksum is not correct (block # 0 and 1). The system board should be replaced, and the box serial number needs to be reinstalled.
Solution: Replace the battery with the correct Lenovo battery for this computer. If you still see the same error message, contact Lenovo service to have the computer serviced.
If a power-on password is set, press any key to display the prompt for the power-on password and then type the correct password and press Enter. If these items are correctly set, and the screen remains blank, have the computer serviced. •...
Follow the appropriate corrective actions for power-on self-test (POST) error messages. 3. Verify that the latest UEFI BIOS for your model has been installed. 4. Verify the proper memory configuration and compatibility including the maximum memory size and the memory speed. 5.
Solution: – Try another cable. – Make sure that the link partner is set to auto-negotiate. – Make sure that the switch is 802.3ab-compliant (gigabit over copper). A wireless LAN problem Problem: I cannot connect to the network using the built-in wireless network card. Solution: Make sure that: •...
ThinkPad pointing device problems • Problem: The pointer drifts when the computer is turned on or after it resumes normal operation. Solution: The pointer might drift when you are not using the TrackPoint pointing device during normal operation. This is a normal characteristic of the TrackPoint pointing device and is not a defect. Pointer drifting might occur for several seconds under the following conditions: –...
Page 115
– If your computer is in sleep mode, press Fn to resume from the sleep mode. – If the problem persists, follow the solution for the following problem. • Problem: The screen is unreadable or distorted. Solution: Make sure that: –...
Solution: Press and hold the power button for four seconds or more to turn off your computer; then turn it on again. • Problem: Missing, discolored, or bright dots appear on the screen every time you turn on your computer. Solution: This is an intrinsic characteristic of the TFT technology.
Page 117
2. Turn on the external monitor and the computer. 3. Right-click on the desktop, and do one of the following: – For Windows 7 and Windows 8.1: Click Screen resolution. – For Windows 10: Click Display settings, show the displayed window in full screen, and then click Advanced display settings.
Page 118
– For Windows 7 and Windows 8.1: Click Advanced settings. – For Windows 10: Click Display adapter properties. 6. Click the Monitor tab. 7. Select the correct screen refresh rate. • Problem: Wrong characters are displayed on the screen. Solution: Did you follow the correct procedure when installing the operating system or program? If you did, have the external monitor serviced.
Solution: If you use the Extend desktop function, disable it, and change the display output location. If a DVD movie or a video clip is playing, stop the playback, close the program, and then change the display output location. • Problem: The screen position on the external monitor is incorrect when that monitor is set for a high resolution.
Solution: The control is designed to compensate for minor differences in balance and does not completely mute either channel. • Problem: There is no volume control for MIDI sound in the Volume Mixer window. Solution: Use the hardware volume control. This is because the built-in synthesizer software does not support the control.
If the battery cannot be fully charged in 24 hours, use a new battery. • Problem: Your computer shuts down before the battery-status icon in the Windows notification area shows empty, or your computer operates after the battery-status icon in the Windows notification area shows empty.
If you receive an error message while the operating system is loading the desktop configuration after the POST is completed, check the following items: 1. Go to the Lenovo Support Web site at http://www.lenovo.com/support and search for the error message. 2. Go to the Microsoft Knowledge Base homepage at http://support.microsoft.com/ and search for the error message.
Solution: The battery power is getting low. Connect the ac power adapter to the computer and plug it into an electrical outlet, or replace the battery with a charged one. • Problem: The computer display remains blank after you press Fn to return from sleep mode. Solution: Check whether an external monitor was disconnected or turned off while the computer was in sleep mode.
Solution: On the Startup menu of ThinkPad Setup, make sure that the hard disk drive or hybrid drive is on the Boot priority order list. If it is on the Excluded from boot order list, it is disabled. Select the entry for it on the list and press the Shift+1 key.
• Problem: The computer cannot play a CD, or the sound quality is not good. Solution: Ensure that the disc meets the standards for your country. Usually, a disc that meets the local standards is marked with a CD logo on the label. If you use a disc that does not meet these standards, we cannot guarantee that it will play, or that, if it does play, the sound quality will be good.
• “Recovery overview for the Windows 7 operating system” on page 111 • “Recovery overview for the Windows 8.1 operating system” on page 116 Recovery overview for the Windows 7 operating system This section provides information about the recovery solutions provided by Lenovo on the Windows 7 operating system. Notes: •...
This section provides instructions on how to perform a backup operation using the Rescue and Recovery program. 1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo PC Experience ➙ Lenovo Tools ➙ Enhanced Backup and Restore. The Rescue and Recovery program opens.
This section provides instructions on how to perform a recovery operation using the Rescue and Recovery program. 1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo PC Experience ➙ Lenovo Tools ➙ Enhanced Backup and Restore. The Rescue and Recovery program opens.
Creating a rescue medium This section provides instructions on how to create a rescue medium. 1. From the Windows desktop, click Start ➙ All Programs ➙ Lenovo PC Experience ➙ Lenovo Tools ➙ Enhanced Backup and Restore. The Rescue and Recovery program opens.
2. Repeatedly press and release the F12 key when turning on the computer. When the Boot Menu window opens, release the F12 key. 3. In the Boot Menu window, select the desired optical drive as the first boot device. Then, insert the rescue disc into the optical drive and press Enter.
Attention: If you need updated device drivers for your computer, do not download them from the Windows Update Web site. Obtain them from Lenovo. For more information, see “Making sure device drivers are current” on page 86.
Resetting your computer to the factory default settings If you want to recycle your computer or just start over, you can reset your computer to the factory default settings. Resetting the computer will reinstall the operating system, reinstall all the programs that came with your computer, and reset all the settings to the factory default settings.
Page 134
Creating recovery media To create recovery media, you need a USB drive with at least 8 GB of storage. The required USB capacity depends on the size of the recovery image. Attention: Creating recovery media will delete anything stored on the USB drive. To avoid data loss, make a backup copy of all the data that you want to keep.
Recovery overview for the Windows 10 operating system The Windows recovery programs enable you to reset your computer or use advanced startup options. It is recommended that you create a recovery USB drive as early as possible. Store the recovery USB drive as a backup or replacement for the Windows recovery programs.
Page 136
Creating a recovery USB drive The USB drive that you use to create the recovery USB drive must be at least 16 GB of storage. The actual USB capacity that is required depends on the size of the recovery image. Attention: The creation process deletes anything stored on the USB drive.
Page 138
1. Turn off the computer or put the computer into hibernation mode. Then disconnect the ac power adapter and all cables from the computer. 2. Locate the SIM-card tray at the right side of the computer. 3. Insert a straightened paper clip into the hole in the SIM-card tray .
Note: If an unauthorized battery is installed, the following message will be displayed: “The battery installed is not supported by this system and will not charge. Please replace the battery with the correct Lenovo battery for this system.”...
3. Slide the battery latches to the unlocked position . Then remove the battery 4. Insert a new battery until it clicks into place. 5. Turn the computer over again. Connect the ac power adapter and all cables. Replacing the coin-cell battery Before you start, print these instructions and read “Important safety information”...
Page 141
5. Remove the rubber caps. 6. Loosen the screws . Then remove the cover 7. Detach the connector . Then remove the coin-cell battery Chapter 10 Replacing devices...
Page 142
8. Install the new coin-cell battery . Then attach the connector 9. Reinstall the computer cover . Then tighten the screws 10. Reinstall the rubber caps. User Guide...
11. Reinstall the battery. See “Replacing the battery” on page 123. 12. Turn the computer over again. Connect the ac power adapter and all cables. After you replace the coin-cell battery, reset the system date and time in the ThinkPad Setup program. See “Date and Time menu”...
Page 144
6. To reveal the screw heads beneath the keyboard frame, use the flat end of the multi-tool in the shipping package of the new keyboard to slide the keyboard forward by 2.5 mm (0.1 inch). 7. Use the cross end of the multi-tool to loosen the screws. User Guide...
Page 145
8. Pivot the keyboard slightly upward as shown by arrow until you can see the connectors on the bottom side of the keyboard. Then turn over the keyboard as shown by arrow 9. Put the keyboard on the palm rest and detach the connectors. Then remove the keyboard. To install the new keyboard, do the following: Chapter 10 Replacing devices...
Page 146
1. Attach the connectors, and then turn over the keyboard. 2. Insert the keyboard into the keyboard bezel as shown. Ensure that the front edge of the keyboard (the edge that is close to the display) is under the frame of the keyboard bezel. User Guide...
Page 147
3. Ensure that the screw heads are exposed completely. Otherwise, reveal the screw heads by sliding the keyboard frame forward with the flat end of the keyboard multi-tool. 4. Tighten the screws with the cross end of the keyboard multi-tool to secure the keyboard in place. Chapter 10 Replacing devices...
Page 148
5. Slide the keyboard frame backward by 2.5 mm (0.1 inch) with the flat end of the keyboard multi-tool to hide the latches of the keyboard frame under the keyboard bezel. Note: Do not press and hold the keys while sliding the keyboard frame, otherwise the keyboard frame cannot be moved.
7. Reinstall the rubber caps. 8. Reinstall the battery. See “Replacing the battery” on page 123. 9. Turn the computer over again. Connect the ac power adapter and all cables. Replacing the internal storage drive Before you start, print these instructions and read “Important safety information” on page vi. Attention: The internal storage drive (such as a hard disk drive, solid-state drive, or hybrid drive) is very sensitive.
Page 150
5. Remove the rubber caps. 6. Loosen the screws . Then remove the cover 7. Remove the screw that secures the storage drive. User Guide...
Page 151
8. Remove the storage drive. 9. Place the new storage drive into the drive bay. 10. Install the screw to secure the storage drive. Chapter 10 Replacing devices...
11. Reinstall the computer cover . Then tighten the screws 12. Reinstall the rubber caps. 13. Reinstall the battery. See “Replacing the battery” on page 123. 14. Turn the computer over again. Connect the ac power adapter and all cables. Replacing a wireless WAN card Before you start, print these instructions and read “Important safety information”...
Page 153
4. If your computer came with a SIM-card tray, remove the SIM-card tray before you remove the bottom cover. See “Installing or replacing the SIM card” on page 121. 5. Remove the rubber caps. 6. Loosen the screws . Then remove the cover Chapter 10 Replacing devices...
Page 154
7. Open the film on the card and hold it when you are replacing the memory module. 8. If a tool is provided with the new card to help you disconnect cables, use the tool to disconnect the cables from the old card. If no such a tool is provided, hold the cable connector with your fingers and gently disconnect each cable from the old card.
Page 155
10. Remove the card. 11. Insert the contact edge of the new card to the corresponding socket . Pivot the new card downward 12. Install the screw to secure the new card. Chapter 10 Replacing devices...
Page 156
13. Connect the antenna cables to the new card as shown. Then release the hand holding the film. 14. Reinstall the computer cover . Then tighten the screws 15. Reinstall the rubber caps. User Guide...
16. Reinstall the battery. See “Replacing the battery” on page 123. 17. Turn the computer over again. Connect the ac power adapter and all cables. Replacing a memory module Before you start, print these instructions and read “Important safety information” on page vi. Increasing memory capacity is an effective way to make programs run faster.
Page 158
6. Loosen the screws . Then remove the cover 7. Open the film and hold it when you are replacing the memory module. 8. Open the latches on both sides of the memory slot at the same time . Then remove the memory module User Guide...
Page 159
9. Place the notched end of the new memory module toward the contact edge side of the memory slot. Insert the memory module into the slot at an angle of about 20 degrees. Pivot the memory module downward until it snaps into place .
Page 160
11. Reinstall the rubber caps. 12. Reinstall the battery. See “Replacing the battery” on page 123. 13. Turn the computer over again. Connect the ac power adapter and all cables. User Guide...
Lenovo to assist you. This section contains information about where to go for additional information about Lenovo and our products, what to do if you experience a problem with your computer, and whom to call for service should it be necessary.
• Lenovo hardware repair - If the problem is determined to be caused by Lenovo hardware under warranty, trained service personnel are available to provide the applicable level of service.
• Installation and maintenance of network operating systems (NOS) • Installation and maintenance of application programs For the terms and conditions of the Lenovo Limited Warranty that applies to your Lenovo hardware product, see “Warranty information” in the Safety, Warranty, and Setup Guide that comes with your computer.
Due to the fact that integrated wireless cards operate within the guidelines found in radio frequency safety standards and recommendations, Lenovo believes they are safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
Electronic emission notices Federal Communications Commission Declaration of Conformity The following information refers to the ThinkPad L450, machine type 20DS and 20DT. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
• Consult an authorized dealer or service representative for help. Lenovo is not responsible for any radio or television interference caused by using other than specified or recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Geräte der Klasse B. Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-Konformitätszeichen - CE - zu führen. Verantwortlich für die Konformitätserklärung nach Paragraf 5 des EMVG ist die Lenovo (Deutschland) GmbH, Gropiusplatz 10, D-70563 Stuttgart. Informationen in Hinsicht EMVG Paragraf 4 Abs. (1) 4: Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse B.
Lenovo product service information for Taiwan Eurasian compliance mark Brazil audio notice Ouvir sons com mais de 85 decibéis por longos períodos pode provocar danos ao sistema auditivo. User Guide...
Collecting and recycling a disused Lenovo computer or monitor If you are a company employee and need to dispose of a Lenovo computer or monitor that is the property of the company, you must do so in accordance with the Law for Promotion of Effective Utilization of Resources.
If you need to replace it with a new one, contact your place of purchase or contact Lenovo for service. If you need to dispose of a disused lithium battery, insulate it with vinyl tape, contact your place of purchase or an industrial-waste-disposal operator, and follow their instructions.
For proper collection and treatment, go to: http://www.lenovo.com/lenovo/environment Battery recycling information for the United States and Canada Appendix B. WEEE and recycling statements...
(RoHS) European Union RoHS Lenovo products sold in the European Union, on or after 3 January 2013 meet the requirements of Directive 2011/65/EU on the restriction of the use of certain hazardous substances in electrical and electronic equipment (“RoHS recast” or “RoHS 2”).
Turkish RoHS The Lenovo product meets the requirements of the Republic of Turkey Directive on the Restriction of the Use of Certain Hazardous Substances in Waste Electrical and Electronic Equipment (WEEE). Ukraine RoHS Appendix C. Restriction of Hazardous Substances Directive (RoHS)
Lenovo is proud to offer our customers products with the ENERGY STAR qualified designation. You might find an ENERGY STAR mark affixed on the computer or displayed on the power settings interface. Lenovo computers of the following machine types, if carry an ENERGY STAR mark, have been designed and tested to conform to the ENERGY STAR program requirements for computers.
Page 180
The Wake On LAN function is enabled when your Lenovo computer is shipped from the factory, and the setting remains valid even when the computer is in sleep mode. If you do not need to have Wake on LAN enabled while the computer is in sleep mode, you can reduce the power consumption and prolong the time in sleep mode, by disabling the setting of Wake on LAN for sleep mode.
Appendix E. Trademarks The following terms are trademarks of Lenovo in the United States, other countries, or both: Lenovo Access Connections Active Protection System Secure Data Disposal ThinkPad ThinkPad logo TrackPoint UltraConnect Intel and Intel SpeedStep are trademarks of Intel Corporation in the U. S. and/or other countries.
Lenovo representative for information on the products and services currently available in your area. Any reference to a Lenovo product, program, or service is not intended to state or imply that only that Lenovo product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Lenovo intellectual property right may be used instead.