function.
Press AMP MENU, then set [<HDMI>] - [CTRL HDMI] to [CTRL ON] on the display panel.
Make sure that your TV is compatible with the Audio Return Channel function.
Make sure that the HDMI cable is connected to a jack on your TV that is compatible with the
Audio Return Channel function.
[148] Troubleshooting
Sound
The left and right sound is unbalanced or reversed.
Check that the speakers and device are connected correctly and securely.
Adjust the sound level parameters using [Speaker Setting] from the home menu.
[149] Troubleshooting
Sound
Dolby Digital or DTS multi-channel sound is not
reproduced.
Check that the DVD, etc., you are playing is recorded in Dolby Digital or DTS format.
When connecting the DVD player, etc., to the digital input jacks of this receiver, make sure
the digital audio output setting of the connected device is available.
Press AMP MENU, then set [<HDMI>] - [AUDIO OUT] to [AMP] on the display panel.
You can only enjoy High Bitrate Audio (DTS-HD Master Audio, Dolby TrueHD), DSD and
Multi Channel Linear PCM with an HDMI connection.
[150] Troubleshooting
Sound
The surround effect cannot be obtained.
Make sure you have selected a sound field for movies or music.
[PLII MV], [PLII MS], [PLIIX MV], [PLIIX MS], [NEO6.CINEMA], and [NEO6.MUSIC] do not
work when [<SPEAKER>] - [SP PATTERN] is set to [2/0] or [2/0.1].
[151] Troubleshooting
Sound
A test tone is not output from the speakers.
The speaker cables may not be connected securely. Check that they are connected
securely and cannot be disconnected by pulling on them slightly.
The speaker cables may have short-circuited.
[152] Troubleshooting
Sound