Table of Contents
Advertisement
DVP-NC60K/NC62K
QQ
3 7 63 1515 0
Step 3: Connecting the Video Cords
Connect this player to your TV monitor, projector, or AV amplifier (receiver) using a video cord.
Select one of the patterns A through C, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
In order to view progressive signal (525p or 625p) pictures with a compatible TV, projector, or
monitor, you must use pattern C.
A
(yellow)
INPUT
Audio/video
VIDEO
cord (supplied)
L
AUDIO
R
TV, projector, or AV
amplifier (receiver)
to LINE OUT (VIDEO)
(green)
(blue)
(red)
Component video
cord (not supplied)
l : Signal flow
A
If you are connecting to a video input jack
Connect the yellow plug of an audio/video cord (supplied) to the yellow (video) jack. You will
enjoy standard quality images.
With this connection, select "NORMAL (INTERLACE)" (default) by pressing the
PROGRESSIVE button on the front panel.
Yellow
TE
L 13942296513
White (L)
Red (R)
Using the PROGRESSIVE button
By using the PROGRESSIVE button on the front panel, you can select the signal format in
which the player outputs video signals (Progressive or Interlace), and the conversion method for
progressive signals. The PROGRESSIVE indicator lights up when the player outputs
progressive signals.
Each time you press PROGRESSIVE, the display changes as follows:
PROGRESSIVE AUTO
m
PROGRESSIVE VIDEO
m
NORMAL (INTERLACE)
◆PROGRESSIVE AUTO
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks.
Normally select this under the above condition. This automatically detects the software type, and
selects the appropriate conversion method.
Note that the picture will not be clear or no picture will appear if you select these settings when
either of the above conditions is not met.
◆PROGRESSIVE VIDEO
Select this setting when:
– your TV accepts progressive signals, and,
– the TV is connected to the COMPONENT VIDEO OUT jacks, and
– you want to fix the conversion method to PROGRESSIVE VIDEO for video-based software.
Select this if the image is not clear when you select PROGRESSIVE AUTO.
Note that the picture will not be clear or no picture will appear if you select these settings when
either of the above conditions is not met.
◆NORMAL (INTERLACE)
Select this setting when:
– your TV does not accept progressive signals, or,
– your TV is connected to jacks other than the COMPONENT VIDEO OUT jacks (LINE OUT
(VIDEO) or S VIDEO OUT).
◆About DVD software types and the conversion method
DVD software can be divided into two types: film-based software and video-based software.
Video-based software is derived from TV, such as dramas and sit-coms, and displays images at
30 frames/60 fields (25 frames/50 fields) per second. Film-based software is derived from film
and displays images at 24 frames per second. Some DVD software contains both video and film.
In order for these images to appear natural on your screen when output in progressive format,
the progressive signals need to be converted to match the type of DVD software that you are
www
watching.
Notes
• When you play video-based software in progressive signal format, sections of some types of images may
appear unnatural due to the conversion process when output through the COMPONENT VIDEO OUT
jacks. Images from the S VIDEO OUT and LINE OUT (VIDEO) jacks are unaffected as they are output in
the normal (interlace) format.
• When using LINE OUT (VIDEO) or S VIDEO OUT, the picture may appear to flicker each time the
PROGRESSIVE button on the front panel is pressed (Interlace switches to Progressive or vice versa).
http://www.xiaoyu163.com
S VIDEO cord
INPUT
B
(not supplied)
S VIDEO
TV, projector, or AV
amplifier (receiver)
(yellow)
to S VIDEO OUT
to COMPONENT
CD/DVD player
VIDEO OUT
C
COMPONENT
VIDEO IN
Y
(green)
P
/C
B
B
(blue)
P
/C
R
R
(red)
TV, projector, or AV
amplifier (receiver)
Yellow
White (L)
Red (R)
,
x
ao
y
.
i
http://www.xiaoyu163.com
8
B
If you are connecting to an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
With this connection, select "NORMAL (INTERLACE)" (default) by pressing the
PROGRESSIVE button on the front panel.
C
If you are connecting to a monitor, projector, or AV amplifier
(receiver) having component video input jacks (Y, P
Connect the component via the COMPONENT VIDEO OUT jacks using a component video
cord (not supplied) or three video cords (not supplied) of the same kind and length. You will
enjoy accurate colour reproduction and high quality images.
If your TV accepts progressive 525p/625p format signals, use this connection and press the
PROGRESSIVE button on the front panel to output progressive signals. For details, see "Using
the PROGRESSIVE button" (page 17).
Green
Blue
Red
When connecting to a standard 4:3 screen TV
Depending on the disc, the image may not fit your TV screen. To change the aspect ratio, see
page 68.
To change the colour system
If the on-screen menu of the player does not appear on the connected TV, switch the player's
colour system to match the colour system of the TV (NTSC or PAL).
First turn off the player by pressing "/1, and then press "/1 again while holding down X on the
player. The player turns back on, and the name of the colour system scrolls across the front panel
display.
Notes
• Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the VCR,
you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack,
connect the player to this jack.
• Consumers should note that not all high definition television sets are fully compatible with this product and
may cause artifacts to be displayed in the picture. In case of 525 or 625 progressive scan picture problems,
it is recommended that the user switch the connection to the 'standard definition' output. If there are
questions regarding your TV set compatibility with this 525p and 625p DVD player model, please contact
our customer service centre.
Q Q
3
6 7
1 3
15
16
Step 4: Connecting the Audio Cords
Select one of the following patterns A or B, according to the input jack on your TV monitor,
projector, or AV amplifier (receiver).
This will enable you to listen to sound.
LINE OUT
R-AUDIO-L
DIGITAL OUT
COAXIAL
R-AUDIO-L
OPTICAL
Y
P
B
/C
COMPONENT VIDEO OUT
to DIGITAL OUT
(COAXIAL or OPTICAL)
DIGITAL OUT
COAXIAL
OPTICAL
Optical digital cord (not supplied)
[Speakers]
Rear (L)
Front (L)
Centre
u163
: Signal flow
.
* The yellow plug is used for video signals (page 15).
z Hint
For correct speaker location, see the operating instructions supplied with the connected components.
17
18
1-4
2 9
9 4
2 8
/C
B
B
Green
Blue
Red
VCR
CD/DVD player
TV
Connect
directly
1 5
0 5
8
2 9
INPUT
(red)
(yellow)*
Audio/video
cord (supplied)
(white)
(white)
(yellow)*
(red)
TV, projector, or AV
VIDEO
amplifier (receiver)
to LINE OUT L/R (AUDIO)
LINE OUT
VIDEO
B
P
R
/C
R
S VIDEO OUT
CD/DVD player
or
Coaxial digital cord
(not supplied)
to optical
to coaxial
digital input
digital input
[Speakers]
Rear (R)
m
Front (R)
AV amplifier (receiver)
with a decoder
Subwoofer
co
9 9
, P
/C
)
R
R
9 4
2 8
9 9
A
VIDEO
L
AUDIO
R
B
Hide quick links:
Advertisement
Table of Contents
