CONTENTS BEFORE USE BEFORE USE IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important BASICS that you read and observe Warning and Caution in this manual. • Please keep the manual in a safe and accessible place for future reference. GETTING STARTED 1 Select the display language Warning...
BASICS Faceplate Remote control (RC-406) Display window (Sold separately for Remote sensor (Do not expose Volume knob Loading slot to bright sunlight.) Pull out the insulation sheet when using for the first time. * Not used Detach button : Flashes when the unit enters searching status.
GETTING STARTED To set the date Turn the volume knob to select [DATE FORMAT], then press the knob. Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob. Turn the volume knob to select [DATE SET], then press the knob. Turn the volume knob to make the settings, then press the knob.
Page 5
PRESET TYPE NORMAL: Memorizes one station for each preset button in each band For details on how to update the firmware, see: ( 6, RADIO). ; MIX: Memorizes one station for each preset button, www.kenwood.com/cs/ce/ regardless of the selected band. CLOCK SYSTEM CLOCK DISPLAY ON: The clock time is shown on the display even when the unit is...
RADIO Direct Access Tuning (using RC-406) Press DIRECT to enter Direct Access Tuning. Press the number buttons to enter a frequency. Press to search for a station. • To cancel, press or DIRECT. • If no operation is done for 10 seconds after step , Direct Access Tuning is automatically canceled.
RADIO Preparation: ON: Allows the unit to temporarily switch to Traffic Information if available (“TI” Select [ON] for [BUILT-IN AUX]. ( 5) lights up). ; OFF: Cancels. Start listening PTY SEARCH 1 Press the volume knob to enter PTY language selection. 2 Turn the volume knob to select the PTY language (ENGLISH/ FRENCH/ Connect a portable audio player (commercially available).
When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting. ( 15) For ANDROID: Applicable only when [BROWSE MODE] is selected.
While in ANDROID source, press 5 repeatedly. Turn the volume knob quickly to enter character search. BROWSE MODE : Control Android device from this unit via KENWOOD Turn the volume knob to select the character. MUSIC PLAY application installed in the Android To search for a character other than A to Z and 0 to 9, enter only “...
Pandora® CD / USB / iPod / ANDROID (for Preparation: Listen to TuneIn Radio/ TuneIn Radio Pro/ Install the latest version of the Pandora application on your device (iPhone/ iPod touch), then Aupeo (for create an account and log in to Pandora. While listening to TuneIn Radio, TuneIn Radio Pro or •...
AUDIO SETTINGS Pandora® (for While listening to any source... Search for a registered station Press AUD to enter [AUDIO CONTROL] directly. Press Turn the volume knob to select an item (see the following table), then Turn the volume knob to select an item, then press the knob. press the knob.
DISPLAY SETTINGS AUDIO SETTINGS (For TRE ADJUST TRE CTR FRQ 10.0KHZ/ 12.5KHZ/ 15.0KHZ/ 17.5KHZ: Selects the center frequency. TRE LEVEL –8 to +8 (+1): Adjusts the level. PRESET EQ DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/ NATURAL/ USER: Selects a preset equalizer suitable to the music genre. (Select [USER] to use the settings made in [EQ PRO].) [DRIVE EQ] is a preset equalizer that reduces noise outside the car or running noise of the tyres.
TROUBLESHOOTING DISPLAY SETTINGS Default: XX Symptom Remedy COLOR SELECT (For • Adjust the volume to the optimum level. Sound cannot be heard. Select color for ALL ZONE, ZONE 1 and ZONE 2 separately. • Check the cords and connections. 1 Select a zone. ( 12) “MISWIRING CHECK WIRING Turn the power off, then check to be sure the terminals 2 Select a color for the selected zone.
Page 14
• If this does not solve the problem, the connected Android deliverable. device is unable to route the audio signal to unit. ( 16) • Make sure KENWOOD MUSIC PLAY APP is installed on the Cannot playback at Muting upon the reception of a phone call [BROWSE MODE].
- iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C, 6, 6 Plus General • You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod. • This unit can only play the following CDs: • Detailed information and notes about the playable audio files are stated in an online manual on the following website: www.kenwood.com/cs/ce/audiofile/...
Page 16
REFERENCES About Android device Change the display information • This unit supports Android OS 4.1 and above. Each time you press DISP, the display information changes. • Some Android devices (with OS 4.1 and above) may • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg. station name, playing time) appears. not fully support Android Open Accessory (AOA) 2.0.
INSTALLATION / CONNECTION Warning Part list for installation • The unit can only be used with a 12 V DC power supply, negative ground. • Disconnect the battery’s negative terminal before wiring and mounting. • Do not connect Battery wire (yellow) and Ignition wire (red) to the car chassis or Ground wire (A) Faceplate (B) Trim plate (black) to prevent a short circuit.
Page 18
INSTALLATION / CONNECTION Installing the unit (in-dash mounting) When installing without the mounting sleeve Remove the mounting sleeve and trim plate from the unit. Align the holes in the unit (on both sides) with the vehicle mounting bracket and secure the unit with screws (supplied).
Page 19
To the terminal that is grounded when the telephone To front speaker (right) rings or during conversation ( 14) Gray/Black (Mute control wire) (To connect the Kenwood navigation system, refer your Green navigation manual.) To rear speaker (left) Green/Black Purple...
Red (Ignition wire) when the telephone rings or during (Mute control wire) MUTE conversation ( 14) Battery wire A4 (Yellow) (To connect the Kenwood (Yellow) navigation system, refer your Default wiring navigation manual.) Color and function ANT CONT To the power control terminal...
SPECIFICATIONS Frequency Range 87.5 MHz — 108.0 MHz (50 kHz space) Frequency Range 87.5 MHz — 108.0 MHz (50 kHz space) Usable Sensitivity (S/N = 26 dB) 0.71 μV/75 Ω Channel Space Selection 50 kHz Quieting Sensitivity 2.0 μV/75 Ω Usable Sensitivity (S/N = 26 dB) 8.2 dBf (0.71 μV/75 Ω) (DIN S/N = 46 dB) Quieting Sensitivity 17.2 dBf (2.0 μV/75 Ω) Frequency Response (±3 dB) 30 Hz —...
Page 22
SPECIFICATIONS Laser Diode GaAIAs Maximum Output Power 50 W × 4 Digital Filter (D/A) 8 times over sampling Full Bandwidth Power 22 W × 4 (at less than 1 % THD) Spindle Speed 500 rpm — 200 rpm (CLV) Speaker Impedance 4 Ω — 8 Ω Wow & Flutter Below measurable limit Tone Action Bass 100 Hz ±8 dB Frequency Response (±1 dB)
Page 23
• Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered 2011/65/EU trademarks of Pandora Media, Inc., used with permission. Manufacturer: JVC KENWOOD Corporation 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, 221-0022, libFLAC Japan Copyright (C) 2000,2001,2002,2003,2004,2005,2006,2007,2008,2009 Josh Coalson...
Page 26
Please note that the use of this accessory with iPod or iPhone may affect wireless performance. JVC KENWOOD Corporation • iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered 3-12, Moriya-cho, Kanagawa-ku, Yokohama-shi, Kanagawa, in the U.S.