hit counter script
Pioneer DJM-700-K Service Manual
  1. Manuals
  2. Brands
  3. Pioneer Manuals
  4. Music Mixer
  5. DJM-700-K
  6. Service manual

Pioneer DJM-700-K Service Manual

Hide thumbs Also See for DJM-700-K:
Table of Contents

Advertisement

Quick Links

DJ MIXER
DJM-700-S
DJM-700-K
THIS MANUAL IS APPLICABLE TO THE FOLLOWING MODEL(S) AND TYPE(S).
Model
Type
DJM-700-S
KUCXJ
DJM-700-K
DJM-700-S
WYXJ5
DJM-700-K
DJM-700-S
RLXJ
DJM-700-K
For details, refer to "Important Check Points for good servicing".
PIONEER CORPORATION
PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936
PIONEER CORPORATION 2007
Power Requirement
AC 120 V
AC 220 V to 240 V
AC 110 V to 120 V / AC 220 V to 240 V
4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan
DJM-700-S
T-ZZR SEPT. 2007 printed in Japan
ORDER NO.
RRV3644
Remarks

Advertisement

Table of Contents
loading

Related Manuals for Pioneer DJM-700-K

Summary of Contents for Pioneer DJM-700-K

  • Page 1 PIONEER CORPORATION 4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A. PIONEER EUROPE NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium PIONEER ELECTRONICS ASIACENTRE PTE. LTD. 253 Alexandra Road, #04-01, Singapore 159936 PIONEER CORPORATION 2007 T-ZZR SEPT.

  • Page 2: Safety Information

    PIONEER Service Manual. A subscription to, or additional copies of, Also test with plug reversed Earth PIONEER Service Manual may be obtained at a nominal (Using AC adapter ground charge from PIONEER. plug as required)
  • Page 3 [Important Check Points for Good Servicing] In this manual, procedures that must be performed during repairs are marked with the below symbol. Please be sure to confirm and follow these procedures. 1. Product safety Please conform to product regulations (such as safety and radiation regulations), and maintain a safe servicing environment by following the safety instructions described in this manual.

  • Page 4: Table Of Contents

    CONTENTS SAFETY INFORMATION ................................2 1. SERVICE PRECAUTIONS ..............................5 1.1 NOTES ON SOLDERING ...............................5 2. SPECIFICATIONS .................................6 2.1 ACCESSORIES ................................6 2.2 SPECIFICATIONS................................6 2.3 PANEL FACILITIES .................................7 3. BASIC ITEMS FOR SERVICE.............................12 3.1 CHECK POINTS AFTER SERVICING..........................12 3.2 PCB LOCATIONS .................................13 3.3 JIGS LIST ..................................14 4.

  • Page 5: Service Precautions

    1. SERVICE PRECAUTIONS 1.1 NOTES ON SOLDERING • For environmental protection, lead-free solder is used on the printed circuit boards mounted in this unit. Be sure to use lead-free solder and a soldering iron that can meet specifications for use with lead-free solders for repairs accompanied by reworking of soldering.

  • Page 6: Specifications

    2. SPECIFICATIONS 2.1 ACCESSORIES Accessories • Operating Instructions • Warranty Card (KUCXJ: DRB1426) (WYXJ5: DRB1425) (RLXJ: DRB1427) 2.2 SPECIFICATIONS 1 General 3 Input/output connector systems Power source...............AC 120 V, 60 Hz PHONO input connectors Power consumption ............... 34 W RCA pin jacks ...................3 Operating temperature ....

  • Page 7: Panel Facilities

    2.3 PANEL FACILITIES OPERATION PANEL POWER 33 34 DJM–700 PROFESSIONAL MIXIER MASTER MIDI MIC1 CH-1 CH-2 CH-3 CH-4 LEVEL ON/OFF START/STOP LINE PHONO LINE PHONO LINE PHONO BEAT EFFECTS MIC1 LEVEL TRIM TRIM TRIM TRIM OVER OVER OVER OVER OVER MIC2 LEVEL –1 –1...
  • Page 8 21 Cross fader curve switch (CROSS FADER) 13 Channel equalizer mid-range adjust dial (MID) This switch allows the user to select from three types of cross fader Use to adjust the mid-range frequency sound for each channel. curve response. (adjustable range: –26 dB to +6 dB) 14 Channel equalizer low-range adjust dial (LOW) •...

  • Page 9: Display Section

    DISPLAY SECTION 31 Headphones jack (PHONES) Connect to headphones equipped with phone-type jack. 32 Beat select buttons ( BEAT ) (Beat up):Doubles the calculated BPM. (Beat down):Halves the calculated BPM. 1 2 3 4 A B M • Some effects can be set for “3/4”. AUTO MIDI With some effects, these are used for functions other than setting...
  • Page 10 4 Beat display section indicator flashes. Although the display includes seven actual indicators, the values of the two ends can also be considered to Displays the location of parameter 1 relative to BPM (1/1 beat). The represent indicators, with the result that nine positions can be lower row is lighted constantly.

  • Page 11: Connection Panel

    16 MASTER 2 output connectors of a Pioneer DJ CD player. RCA type unbalanced output. When the connectors are connected, the DJM-700-S/DJM-700-K’s fader can be used to perform start/stop on the DJ CD player. 17 MASTER 1 output connectors Two microphone input jacks (MIC 2) XLR type (male) balanced output.

  • Page 12: Basic Items For Service

    3. BASIC ITEMS FOR SERVICE 3.1 CHECK POINTS AFTER SERVICING To ensure the quality of the product after repair, check the recommended items shown below: Procedures Item to be checked Check if all the symptoms pointed out by the customer have been addressed.

  • Page 13: Pcb Locations

    3.2 PCB LOCATIONS PANEL 2 ASSY PANEL 1 ASSY MIC VR MIC1 JACK INPUT OUTPUT PRIMARY ASSY ASSY ASSY ASSY ASSY HP JACK MAIN TRANS FADER (CH2) FADER (CH3) ASSY ASSY ASSY ASSY ASSY ASSY FADER FADER (CH1) (CH4) ASSY ASSY FADER (CROSS) ASSY NOTES:...

  • Page 14: Jigs List

    3.3 JIGS LIST Jigs list Jig Name Jig No. Remarks Used for connector conversion Dedicated cable GGD1530 Used for firmware download Interface device GGF1605 DJM-700-S...
  • Page 15 DJM-700-S...

  • Page 16: Block Diagram

    4. BLOCK DIAGRAM 4.1 OVERALL WIRING DIAGRAM MIC2 BOOTH/REC MIDI D_OUT RETURN JA4009 MIC VR DKN1188-A ASSY (DWX2686) CN7601 CN3013 CKS3153-A CKS2643-A MIC1_IN MIC1_IN MIC1 MIC1 MIC1_GND MIC1_GND MIC2_IN MIC2_IN CN3003 MIC2 CN302 MIC2 MIC2_GND MIC2_GND S6B-PH-K-S B6B-PH-K-S INPUT ASSY MUTE MUTE V-15A...
  • Page 17 MASTER1 SEND MASTER2 PRIMARY ASSY TRANS ASSY JA4001 JA4002 (DWX2687: KUCXJ, WYXJ5) (DWX2688: KUCXJ, WYXJ5) DKB1077-A DKB1077-A JA4003 PKB1034-A (DWX2692: RLXJ (DWX2757: RLXJ) CN102 B2P3-VH CN301 B10B-EH 120V 120V B10B-EH KUCXJ, WYXJ5 RKP1751-A V-15_AC V-15_AC GNDA GNDA V+5A_AC V+5A_AC V+15_AC V+15_AC V+5D_AC2 V+5D_AC2...

  • Page 18: Overall Block Diagram

    4.2 OVERALL BLOCK DIAGRAM IC3026 IC3027 IC1604 IC3026 IC3028 IC1401 IC1501 IC3001- IC3002 IC1511 IC1505 IC3007- IC1512- IC3008 IC1514 IC1502 IC1610 IC1506 IC3006 IC1402 IC4008 IC1403 IC1304 DJM-700-S...
  • Page 19 IC1605 IC1603 IC1602 IC1601 IC1611 IC1702 IC1703 DIGITAL IC1205 IC1101 VR(PANEL1) DJM-700-S...

  • Page 20: Main Block Diagram

    4.3 MAIN BLOCK DIAGRAM CHn In CHn Fader CF Assign Phono in 3Band BEAT BEAT PHONO Thru (ch2-4) detect EFFECTS Monitor EFFECTS CF_A [CHx(pre)] [CHx] [CHx(post)] CF_B CDin/Line in Send 3 posi (ch1-4) Return [CHx] CROSS Fader Fader Curve 2 posi CHx Level Meter MIC SW BEAT...
  • Page 21 MIC Data Talk Master Over Balance BEAT Master Rec Out detect EFFECTS Mono Master Level Send BEAT [Master] [Master] Stereo detect Return EFFECTS Send Master Out1 [CF_A] [CF_A] [CF_A(post)] Return [Master] Master Out2 Digital Out Talk Over On/Off Master Level Meter Send BEAT Master CUE...

  • Page 22: Diagnosis

    5. DIAGNOSIS 5.1 TEST MODE 1. Description of Test Modes The Following eight test modes are provided for this unit: 1 Mode 1 : Confirmation of software version. 5 Mode 5 : SELECT SW Operating Test. ”SW TEST” 2 Mode 2 : ALL LED & FL display ”OFF” MODE. ”ALL CLR” 6 Mode 6 : Volume Test.
  • Page 23 1. Test mode contents. 1 Mode 1 : Confirmation of software version. 2 Mode 2 : ALL LED & FL display ”OFF” MODE. ”ALL CLR” 3 Mode 3 : ALL LED & FL display ”ON” MODE. ”ALL SET” 4 Mode 4 : KEY OPERATING TEST. ”KEY TEST” 5 Mode 5 : SELECT SW Operating Test.
  • Page 24 • FPGA versions display F:5.000 For exsample FPGA : 5.000 2 Mode 2 : ALL LED & FL display ”OFF” MODE. ”ALL CLR” • It displays "ALL CLR" on the FL display in the first 2 seconds. 3 Mode 3 : ALL LED & FL display ”ON” MODE. ”ALL SET” •...
  • Page 25 Swich Lighting LED Remark : CD 10dB CD/LINE CH1 Level Meter LED : LINE OVER : CD 10dB CD/PHONO CH2 Level Meter LED : PHONO OVER : LINE 10dB LINE/PHONO CH3 Level Meter LED : PHONO OVER : LINE 10dB LINE/PHONO CH4 Level Meter LED : PHONO...
  • Page 26 6 Mode 6 : Volume Test . “VOLTEST” • Mode to confirm analog to digital translation value of rotary volume on operation panel by lighting Level Meter LED. • In this mode, to display the value of two or more rotary volumes with one level meter LED, each rotary volume is divided into four groups.
  • Page 27 6 Mode 6 : Volume Test. “VOLTEST” • group 3 Rotary volume that can be confirmed • CH1 LOW, CH2 LOW, CH3 LOW, CH4 LOW Volume Lighting LED Remark "-26" : Lights off CH1 LOW CH1 Level Meter LED "+6" : Full Illuminate "-26"...
  • Page 28 7 Mode 7 : Fader Test. “FDRTEST” • Mode that confirms a value of each CH Fader and Cross Fader. FADER Lighting LED Remark "0" : Lights off CH1 FADER CH1 Level Meter LED "10" : Full Illuminate "0" : Lights off CH2 FADER CH2 Level Meter LED "10"...

  • Page 29: Updating Of The Firmware

    5.2 UPDATING OF THE FIRMWARE Purpose: After replacement of the MAIN PCB Assy, updating of the firmware to the latest version is required. Necessary software and tools PC (With Windows 98, Me, 2000, or XP) GGD1530 (Dedicated cable for connector conversion) GGF1605 (Interface device: MINICUBE2) QB-Programmer (software for updating) Refer to the next page.
  • Page 30 Switch number Switch Power supply method Voltage (printed on the device) position Supplied by the host machine via USB Left Draws power from the target machine Center Depends on the power supply Supplied by the host machine via USB Right * If either "3"...
  • Page 31 • Parameter file 1. Access the download site. • Top page of the download site 2. Click [78K0R] under "Each Device Series". • Selecting a parameter file for downloading Click here 3. From [78K0R/KG3] under "Nickname", click either "UPD78F1164" or "UPD78F1166" under "Device Name". * Downloading either one does not change the file downloaded in step 4.
  • Page 32 4. From [ParameterFile_PG-FP4_PG-FPLx_MINICUBE2] under "Product Type", click [PRM78F1188 V1.00 (624,746byte)] under "Product Name Version (File Size)" to download. Download file name : prm78f1188_v100.exe * Includes parameter files and documents for multiple models of the K0R microcomputer. Click here * Click to start downloading Setup instructions after download : •...

  • Page 33: How To Update

    5.3 HOW TO UPDATE Procedures for Updating 1. Updating of the DSP program (only when necessary) 2. Updating of the DSP data (only when necessary) 3. Updating of the microcomputer Note: After updating of the DSP program or/and data is completed, updating of the main microcomputer must be performed. How to Update the Microcomputer Note: Please turn power of DJM-700 into OFF.
  • Page 34 2) Set the command options after setting the parameter file. (You only need to set the command options the first time you start the program *1) *1 Command option settings are cleared when you change the parameter file, making it necessary to reconfigure the settings. Setup procedure: Display the "Device Setup"...
  • Page 35 3) Load the downloaded firmware. Setup procedure: Select "Load" from the "File" menu, select the downloaded firmware from the location you saved it in and then click the "Open" button. The loaded file is shown in the "Load file" box on the right-side of the QB-Programmer. Display format: Name : File name...
  • Page 36 4) Download the new firmware to the microcomputer. Setup procedure: Select "Autoprocedure (EPV)" from the "Device" menu or click the "Autoprocedure" icon. click Update with Autoprocedure is performed in the following order. • The old firmware is erased from the microcomputer (erase). If old firmware does not exist (blank), this step is skipped. •...
  • Page 37 In this situation, do not turn off the power until the following DSP update compete screen is displayed. Do not turn off the power during the update. Otherwise, the DSP may not restart. • Modifying the FL display during the update (for the DSP program update) Power on PIONEER While downloading the update PROGRAM PROGRAM...

  • Page 38: Power On Sequence

    5.4 POWER ON SEQUENCE Main microcomputer 83-pin IC1205 clears the FPGA program at H. Data and clock output at 84- and Load FPGA program 86-pin IC1205. Power-ON 87-pin IC1205 completes correct loading at L. Main microcomputer 85-pin IC1205 clears FPGA reset FPGA reset cleared 90-pin IC1205 clears reset at H reset cleared...
  • Page 39 77-pin IC1205 begins Master DAC initialization at L Master DAC initialized Data and clock output at 76- and 78-pin IC1205 Handshake with DSP Send version number to the sub microcomputer Clear masking of key information In Test Mode? Test Mode processing In MIDI CH configuration mode?
  • Page 40 Sub microcomputer Sub microcomputer reset cleared In Test Mode? Test Mode processing Cut mask In MIDI CH configuration mode? Sub microcomputer MIDI CH configuration mode processing initialization Work initialization Main processing Clear cut masking * 1 to 4: If these processes do not end within 20 seconds, there is a problem.

  • Page 41: Service Mode

    6. SERVICE MODE • There is no information to be shown in this chapter. DJM-700-S...

  • Page 42: Disassembly

    7. DISASSEMBLY Note: Even if the unit shown in the photos and illustrations in this manual may differ from your product, the procedures described here are common. Knobs and Volumes Location POWER DJM–700 PROFESSIONAL MIXIER MASTER MIDI MIC1 CH-1 CH-2 CH-3 CH-4 LEVEL...
  • Page 43 DISASSEMBLY Fader Remove the 5 slider knob (L2). Remove the 5 screws. Remove the fader panel. Fader panel Slider knob (L2) Disconnect the 4 connectors. Remove the 8 screws. Disconnect the connector. Cut the binder. FADER FADER FADER FADER Remove the 2 screws. (CH1) (CH2) (CH3)

  • Page 44: Control Panel

    Control Panel Remove the 6 Knobs (BLACK). Remove the 2 screws. Remove the 2 screws. Remove the 6 screws. Remove the 2 screws. Note: ×6 Be sure to remove the screws that secure the MIC. Not doing so may result in damage to the connector.
  • Page 45 INPUT Assy Remove the 5 screws to remove the side panel L. ×6 Short pin plug Remove the 3 screws. Remove the MIC VR stay by sliding it up and forward. Remove the 6 short pin plugs. Remove the 5 screws and nuts. Remove the 2 screws.

  • Page 46: Each Setting And Adjustment

    8. EACH SETTING AND ADJUSTMENT • There is no information to be shown in this chapter. DJM-700-S...
  • Page 47 DJM-700-S...

  • Page 48: Exploded Views And Parts List

    9. EXPLODED VIEWS AND PARTS LIST NOTES: Parts marked by "NSP" are generally unavailable because they are not in our Master Spare Parts List. mark found on some component parts indicates the importance of the safety factor of the part. Therefore, when replacing, be sure to use parts of identical designation.
  • Page 49 DHA1741 Pad R DHA1742 Pad T DHA1764 Carton Box See Contrast table (2) (2) CONTRAST TABLE DJM-700-S/KUCXJ, WYXJ5, RLXJ, DJM-700-K/KUCXJ, WYXJ5 and RLXJ are constructed the same except for the following: DJM-700-S DJM-700-S DJM-700-S DJM-700-K DJM-700-K DJM-700-K Mark Symbol and Description...

  • Page 50: Exterior Section

    9.2 EXTERIOR SECTION KUCXJ Refer to “9.3 CONTROL PANEL SECTION”. Only PANEL 1 CN5002 PANEL 1 CN5000 PANEL 2 CN6001 KUCXJ Only KUCXJ Only RLXJ Only DJM-700-S...
  • Page 51 (1) EXTERIOR SECTION PARTS LIST Mark No. Description Part No. Mark No. Description Part No. Washer DEC2920 MAIN Assy DWX2674 • • • • • INPUT Assy DWX2675 • • • • • MIC1 JACK Assy DWX2685 Bottom Sheet A DEC3020 MIC VR Assy DWX2686...
  • Page 52 (2) CONTRAST TABLE DJM-700-S/KUCXJ, WYXJ5, RLXJ, DJM-700-K/KUCXJ, WYXJ5 and RLXJ are constructed the same except for the following: DJM-700-S DJM-700-S DJM-700-S DJM-700-K DJM-700-K DJM-700-K Mark Symbol and Description /KUCXJ /WYXJ5 /RLXJ /KUCXJ /WYXJ5 /RLXJ PRIMARY Assy DWX2687 DWX2687 DWX2692 DWX2687...
  • Page 53 DJM-700-S...

  • Page 54: Control Panel Section

    9.3 CONTROL PANEL SECTION Attachment of the encoder KUCXJ Only OUTPUT CN305 MAIN CN1101 MAIN CN1201 DJM-700-S...
  • Page 55 Button (TAP) DAC2397 Button (FL) DAC2398 Button (MIDI) DAC2399 Slide SW Cap DAC2400 (2) CONTRAST TABLE DJM-700-S/KUCXJ, WYXJ5, RLXJ, DJM-700-K/KUCXJ, WYXJ5 and RLXJ are constructed the same except for the following: DJM-700-S DJM-700-S DJM-700-S DJM-700-K DJM-700-K DJM-700-K Mark Symbol and Description...

  • Page 56: Schematic Diagram

    10. SCHEMATIC DIAGRAM 10.1 INPUT ASSY (1/6) INPUT ASSY (DWX2675) V+15A C3018 0.1u CD1_L (CD1) R3005 R3011 GNDA (CH1) R3026 (LI) IC3001 NJM2121MD V+15A JA3001 GNDA VKB1132-A C3015 GNDA R3006 R3101 R3012 0.1u GNDA V-15A CD1_R LINE1 (LI) R3007 R3102 R3013 LINE1_L V+15A...
  • Page 57 STBY C3021 V+15A CN3004 0.1u STBY C3032 VKN1290-A (MIC1) R3343 MIC1 MIC1 R3103 GNDA GNDA(MIC) GNDA(MIC) (MIC2) GNDA(MIC) CH1_L MIC2 MIC2 (CH1) GNDA(MIC) C3023 C3025 C3027 IC3003 GNDA(MIC) 0.33u/50 0.33u/50 0.33u/50 NJM4580MD FADER_ST_1- FADER_ST_1- GNDA(MIC) FADER_ST_1+ FADER_ST_1+ GNDA(CH1) SEL_CH1 SEL_CH1 GNDA GNDA (CH1)

  • Page 58: Input Assy (2/6)

    10.2 INPUT ASSY (2/6) INPUT ASSY (DWX2675) LINE2_L (LI) R3077 R3063 LINE2_R GNDA V+15A R3078 C3080 0.1u GNDA V+15A V+15A JA3005 GNDA VKB1132-A (CH2) (PI) R3064 LINE2 IC3007 (PI) R3361 NJM2121MD C3068 PHONO2 0.1u PHONO2_L GNDA C3077 C3073 R3378 0.1u 10u/50 GNDA V-15A...
  • Page 59 AUDIO SIGNAL ROUTE (PI) : PHONO INPUT L CH SIGNAL (LI) : LINE INPUT L CH SIGNAL (CH2) : CH2 L CH SIGNAL V+15A C3094 STBY R3345 0.1u GNDA (CH2) R3093 CH2_L V+15A (CH2) CH2_L (CH2) C3085 C3087 C3089 IC3009 0.33u 0.33u 0.33u...

  • Page 60: Input Assy (3/6)

    10.3 INPUT ASSY (3/6) INPUT ASSY (DWX2675) (LI) R3143 R3131 GNDA R3144 V+15A JA3007 VKB1132-A GNDA (PI) R3132 V+15A LINE3 (PI) R3363 C3126 PHONO3 0.1u PHONO3_L GNDA R3379 C3131 10u/50 IC3012 NJM4580MD C3117 GNDA R3364 470p CH GNDA R3322 Q3011 Q3013 C3294 STBY...
  • Page 61 AUDIO SIGNAL ROUTE (PI) : PHONO INPUT L CH SIGNAL LINE3_L (LI) : LINE INPUT L CH SIGNAL (CH3) : CH3 L CH SIGNAL (LI) LINE3_R V+15A V+15A C3138 0.1u STBY C3152 GNDA R3347 0.1u (CH3) R3157 GNDA (PI) V+15A IC3013 CH3_L NJM2121MD...

  • Page 62: Input Assy (4/6)

    10.4 INPUT ASSY (4/6) INPUT ASSY (DWX2675) LINE4_L (LI) R3207 R3195 LINE4_R GNDA V+15A R3208 C3196 0.1u GNDA V+15A JA3008 VKB1132-A (CH4) GNDA V+15A (PI) LINE4 R3196 IC3019 C3184 (PI) R3365 NJM2121MD 0.1u PHONO4 PHONO4_L GNDA C3193 R3380 C3189 0.1u 10u/50 IC3018 NJM4580MD...
  • Page 63 AUDIO SIGNAL ROUTE (PI) : PHONO INPUT L CH SIGNAL (LI) : LINE INPUT L CH SIGNAL (CH4) : CH4 L CH SIGNAL V+15A C3210 STBY R3349 0.1u (CH4) R3221 GNDA V+15A CH4_L (CH4) CH4_L (CH4) C3201 C3203 C3205 IC3021 0.33u 0.33u 0.33u...

  • Page 64: Input Assy (5/6)

    10.5 INPUT ASSY (5/6) INPUT ASSY (DWX2675) REC OUT CN3014 VKN1276-A GNDA(CH3) C3239 CH3_L CH3_L GNDA(CH3) 56p CH C3308 GNDA(CH3) 0.33u Q3021 GNDA(CH3) V+15A 2SK209(BL) CH3_R CH3_R GNDA(CH3) C3232 REC_L SEL_CH3 0.1u SEL_CH3 (REC) GNDA(CH4) R3257 R3261 R3265 GNDA (REC) R3271 R3371 C3247...
  • Page 65 AUDIO SIGNAL ROUTE (REC) : REC L CH SIGNAL (BOOTH) : BOOTH L CH SIGNAL (REC) GNDA C3253 56p CH C3309 Q3026 2SK209(BL) 0.33u REC_R V+15A R3273 R3279 R3284 R3289 R3372 C3259 5.1k 4.7k 4.3k 10u/35 R3285 V-15A IC3024 Q3028 RNB4580F 2SC5938A(AB) R3287...

  • Page 66: Input Assy (6/6)

    10.6 INPUT ASSY (6/6) INPUT ASSY (DWX2675) V+15A C3274 C3276 0.1u V+15A 1000p GNDA R3305 MIC1_- R3307 (MIC1) (MIC1) R3293 C3269 3.3k 2.2k 10u/50 IC3026 V-15A RNB4580F MIC1- MIC1- V-15A GNDA (MIC1) CN7502 (MIC1) GNDA MIC1+ V+15A MIC1+ C3277 GNDA V+15A 1000p CKS2643-A...
  • Page 67 V+15A C3285 0.1u R3311 3.3k GNDA V+15A MIC1_IN R3316 (MIC1) MIC1_OUT C3283 R3317 C3288 22u/16 (MIC1) MIC1 IC3027 (MIC1) RNB4580F 10u/50 (MIC1) IC3027 RNB4580F C3281 V-15A 0.1u GNDA GNDA V-15A R3318 GNDA V+15A R3319 C3289 (MIC2) MIC2 10u/50 (MIC2) IC3028 RNB4580F MIC2_OUT C3286...

  • Page 68: Mic1 Jack Assy

    10.7 MIC1 JACK ASSY MIC1 JACK ASSY (DWX2685) MIC1 JACK JA7501 DKN1136-A CN7502 CKS3153-A MIC1+ (MIC1) MIC1+ GNDA CN3011 GNDA MIC1- (MIC1) MIC1- GNDA AUDIO SIGNAL ROUTE (MIC1) : MIC1 SIGNAL DJM-700-S...

  • Page 69: Mic Vr Assy

    10.8 MIC VR ASSY MIC VR ASSY (DWX2686) MICVR MIC1 CN7601 CKS3153-A (MIC1) MIC1_IN (MIC1) MIC1 GND1 MIC1_GND (MIC2) MIC2_IN CN3013 (MIC2) MIC2 MIC2_GND MIC2 GND1 GND2 MIC1_GND MIC2_GND GND2 AUDIO SIGNAL ROUTE (MIC1) : MIC1 SIGNAL (MIC2) : MIC2 SIGNAL DJM-700-S...

  • Page 70: Main Assy (1/4)

    10.9 MAIN ASSY (1/4) MIC_ADC MAIN ASSY (DWX2674) 24M_AD/DA4 6M_AD/DA4 96k_AD/DA4 (MIC1) MIC_1CH MIC_2CH (MIC2) (MIC2) IC1604 V+5A R1699 V+5A AINR CKS0 R1700 AINL CKS2 R1693 R1701 D1601 D1602 CKS1 RB706D-40 VCOM R1702 AGND SCLK R1703 RB706D-40 MCLK R1704 LRCK GNDA_MIC DGND SDTO...

  • Page 71: Midi Out

    MIDI OUT SW_48/96 V+3R3D 48KHz 96KHz V+3R3D R1759 48/96 SW SW_48/96 GNDD (DI) R1760 IC1701 D_OUT GNDD R1750 GNDD MUTE CPU_MUTE (MIDI) R1761 CN4003 MIDI_OUT OUTY R1770 STBY MUTE2 TC7S04FU FL_VHCTRL FL_VHCTRL GNDD POWER_RESET POWER_RESET CN1701 VKN1413-A GNDD (DI) R1756 24M_AD/DA1 C1707 R1757...

  • Page 72: Main Assy (2/4)

    10.10 MAIN ASSY (2/4) MAIN ASSY (DWX2674) V+3R3REF1 V+3R3D C1107 0.01u/50 L1180 0.01u/50 C1108 C1109 0.01u/50 0.01u/50 C1110 V+3R3D R1181 V+3R3D 1/10W GNDREF1 GNDD AVREF0 CN1101 TIME_1 TIME1 VKN1431-A R1126 R1183 FL_BK TIME_0 FL_BK TIME0 R1184 FL_DATA R1121 FL_TxD AVREF1 STAND_BY5 R1120 No_Use1...
  • Page 73 AUDIO SIGNAL ROUTE : MIDI CH SIGNAL 1/4, 4/4 1/4, 4/4 V+2R5D V+2R5D V+1R2D V+1R2D V+3R3D V+2R5D C1303 RAB4C220J-T GNDD 0.1u/25 R1328 SCPU_B0 IC1301 SCPU_B1 SCPU_B2 SCPU_B3 R1306 FPGA_XPGM OUTY FDSP_D1 TC7SH08FUS1 GNDD FDSP_D2 C1315 C1314 RAB4C220J-T R1330 FDSP_D3 0.1u/25 0.1u/25 SCPU_B4 IO/VREF_7...

  • Page 74: Main Assy (3/4)

    10.11 MAIN ASSY (3/4) MAIN ASSY (DWX2674) DATA_CH1 DATA_CH2 DATA_CH3 DATA_CH4 DATA_MIC DATA_RETURN V+3R3D V+1R2D C1406 CVDD24 CVDD18 0.1u/25 VSS27 HD5/AHCLKX1 HD8/GP0[8] EA20 HD6/AHCLKR1 EA19 C1407 DVDD17 EA17 0.1u/25 VSS28 DVDD12 HD7/GP0[3] VSS20 HD9/GP0[9] CVDD17 EA18 HD10/GP0[10] HD11/GP0[11] EA15 HD12/GP0[12] EA12 C1408 CVDD25...
  • Page 75 POWER V+3R3D V+5D V+5D V+5A V+15A V-15A IC1002 CN1001 Vout PVcc 1/8W R1019 V+5D PGND L1001 GNDD BTH1112-A BD9109FVM V+15A GNDA CN304 V-15A GNDA V+5A GNDD FPGA V+5D V+1R2D L1004 V+5A V+3R3A GNDA GNDD DTL1123-A-T IC1003 IC1001 1/10W R1011 PVcc BTH1112-A VOUT 1/8W...

  • Page 76: Main Assy (4/4)

    10.12 MAIN ASSY (4/4) MAIN ASSY (DWX2674) (CH1) V+15A C1502 (MIC1) MIC_1CH 0.1u/25 GNDA_CH1 (MIC2) MIC_2CH R1509 3.3k (CH1) R1537 IC1501 R1510 NJM4580MD 3.3k V-15A (CH1) R1525 2.4k GNDA_CH1 MIC1 V+15A R1511 GNDA(MIC) 3.3k GNDA(MIC) R1533 GNDA(MIC) IC1501 R1512 GNDA_MIC NJM4580MD 3.3k MIC2...
  • Page 77 (D1) DATA_CH1 R1653 (CH1) R1775 V+5A R1771 C1559 C1563 2700p/50 2700p/50 R1766 V+15A D1501 D1505 D1509 D1513 V+5A AINL+ AINR+ RB706D-40 AINL- AINR- (CH1) C1523 RB706D-40 RB706D-40 VREFGND VREF 0.1u/25 RB706D-40 AVDD VMID GNDA C1714 GNDA_CH1 V+3R3A 0.1u/25 AGND DGND R1621 96k_AD/DA1 LRCLK...

  • Page 78: Panel 1 Assy

    10.13 PANEL 1 ASSY PANEL 1 ASSY (DWX2677) V+5D V+5D V+5D V+5D V+5D V+5D V+5D V+5D V+5D V+5D C1_1 V+5D V+5D V+5D C2_1 V+5D GNDD R5183 V+3R3REF1 GNDD GNDD GNDD CN5000 GNDREF1 VKN1258-A R5035 Q5022 GNDD VR_IN1 GNDD 2SC3052(EF) VR_IN1 VR_IN2 R5161 VR_IN2...
  • Page 79 AC2 V+5D V+30 CN5002 VKN1242-A FLAC1 FLAC1 FLAC2 FLAC2 GNDD STBY GNDD CN305 V+5D R5239 V+5D R5238 FL_30V R5237 MUTE2 MUTE2 R5236 FL_GND FL Holder=DNF1772-A GNDD V+5D GNDFL V+5D GNDD R5058 FL_DATA FL_CLK R5059 R5060 FL_LAT R5061 FL_BK V+30 R5056 R5057 PGND LGND...

  • Page 80: Panel 2 Assy

    10.14 PANEL 2 ASSY PANEL 2 ASSY (DWX2678) V+3R3REF2 V+3R3REF2 V+3R3REF2 V+3R3REF2 V+3R3REF2 V+3R3REF2 V+3R3REF2 V+3R3REF2 V+3R3REF2 V+3R3REF2 VR_FD4 VR_FD1 VR_FD2 VR_FD3 GNDREF2 GNDREF2 GNDREF2 GNDREF2 CN6004 CN6006 CN6002 CN6003 GNDREF2 B4B-PH-K-S B4B-PH-K-S B4B-PH-K-Y B4B-PH-K-Y GNDREF2 GNDREF2 GNDREF2 GNDREF2 CN6001 V+3R3REF2 VKN1262-A CN6005...
  • Page 81 V+5D C6024 0.1u/25 GNDD IC6002 V+5D CN6007 V+5D R6021 52492-1320 FL_BK FL_LAT GNDD FL_CLK V+5D(LED) R6022 R6023 FL_DATA FL_DATA FL_DATA R6024 FL_CLK FL_CLK FL_LAT FL_LAT TC74HCT08AF-TBB FL_BK GNDD FL_BK CN5001 GNDD BEAT EFFECTS R6018 S6011 DSX1068-A CRFD ASSIGN CRFD ASSIGN CRFD ASSIGN CRFD ASSIGN 1SS355...

  • Page 82: Output Assy (1/6)

    10.15 OUTPUT ASSY (1/6) OUTPUT ASSY (DWX2676) V+15A C4017 100u/25 C4018 0.1u GNDA R4001 R4037 0.047u 4.3k 3.9k (MA-) C4013 C4026 470p R4025 MASTER_L_HOT B11B-PH-K-S (MA+) C4027 CN4001 HP_L CCH1357-A R4002 R4026 (HP) HP_L HP_L 4.3k V-15A IC4001 GNDA(HP) HP_R NJM4580MD HP_R HP_R...
  • Page 83 Canon Shield(DNF1789-A) V+15A MASTER_L_COLD C4041 JA4001 100u/25 DKB1077-A C4042 V+15A 0.1u R4074 GNDA Q4005 2SK209(BL)-TLB C4037 GNDA (MA+) 82p CH R4055 VTF1093-A INC2001AC1-TLB R4227 L4003 4.7k Q4009 (MA-) R4070 R4098 (MA-) R4056 IC4003 NJM5532DD 4.7k V-15A R4078 R4094 9.1k R4066 C4047 Q4001 2SC5938A(AB)-TLB...

  • Page 84: Output Assy (2/6)

    10.16 OUTPUT ASSY (2/6) OUTPUT ASSY (DWX2676) V+15A C4065 0.1u GNDA C4063 100p CH R4109 MASTER2_L R4102 (MA2+) C4067 R4110 MASTER2_L+ (MA2) 10u/35 (MA2-) IC4005 MASTER2_L- NJM4580MD R4103 C4066 0.1u V-15A GNDA GNDA C4064 100p CH R4108 MASTER2_R R4104 V+15A C4068 R4111 MASTER2_R+...
  • Page 85 V+15A C4069 0.1u GNDA R4114 C4071 JA4003 Q4013 MASTER2_L PKB1034-A 2SK209(BL)-TLB 150p CH (MA2) R4113 C4075 (MA2) (MA2) 10u/35 IC4006 NJM4580MD R4118 C4070 GNDA 0.1u GNDA V-15A GNDA GNDA GNDA GNDA Q4015 INC2001AC1-TLB MASTER_MUTE R4115 C4072 Q4014 2SK209(BL)-TLB 150p CH V+15A MASTER2_R R4112...

  • Page 86: Output Assy (3/6)

    10.17 OUTPUT ASSY (3/6) OUTPUT ASSY (DWX2676) V+15A C4091 10u/50 C4092 0.1u GNDA C4144 SEND_L 0.33u C4093 C4079 R4122 R4126 R4132 (SD) SEND_L 4.7k 4.7k 4.3k 10u/50 (SD) IC4007 SEND_R RNB4580F-TBB C4094 0.1u C4096 GNDA 10u/50 GNDA V-15A (Chip JP) R4238 C4145 SEND_R...
  • Page 87 Q4017 2SK209(BL)-TLB SEND_L JA4006 DKN1452-A R4138 C4101 (SD) (SD) 10u/35 GNDA GNDA R4142 GNDA SEND GNDA Q4019 2SC5938A(AB)-TLB Q4018 2SK209(BL)-TLB SEND_R JA4007 DKN1452-A R4139 C4102 10u/35 GNDA GNDA R4143 GNDA Q4020 2SC5938A(AB)-TLB GNDA V+15A C4099 0.1u GNDA RETURN_L C4103 (RN) RETURN_L (RN) 10u/50...

  • Page 88: Output Assy (4/6)

    10.18 OUTPUT ASSY (4/6) OUTPUT ASSY (DWX2676) V+5D JA4009 DKN1188-A GNDD MIDI OUT R4151 R4157 C4114 0.01u STBY D4009 GNDD V+5D GNDD GNDD GNDD MIDI_OUT R4152 R4158 (MIDI) Q4022 RT1N241M-TLB GNDD GNDD GNDD (DI) V+5D R4162 2.7k GNDD Q4021 R4147 C4109 R4153 (DI)
  • Page 89 FL_VHCTRL PWR_RESET POWER_RESET CPU_MUTE CPU_MUTE MUTE2 PWR_RESET (MIDI) FL_VHCTRL MIDI_OUT MUTE2 MUTE2 MIDI_OUT DIGI_OUT CPU_MUTE (DI) CN1701 GNDD DIGI_OUT V+5D GNDD C4115 48/96 SW C4116 GNDD CN4003 VKN1240-A IC4010 IC4009 DSH1025-A OUT1 OUTY S4002 OUT6 GNDD OUT2 OUT5 R4160 OUT3 OUT4 GNDD GNDD...

  • Page 90: Output Assy (5/6)

    10.19 OUTPUT ASSY (5/6) OUTPUT ASSY (DWX2676) 2SK209(BL)-TLB Q4033 HP_L V+15A C4125 HP_L C4118 R4164 R4168 0.1u (HP) HP_L 5.6k 3.9k GNDA 10u/50 C4128 R4172 R4174 (HP) 10u/50 IC4011 RNB4580F-TBB V-15A STBY Q4023 2SC3326(AB)-TLB R4231 R4170 GNDA GNDA 2SK209(BL)-TLB Q4034 R4232 HP_R HP_R...
  • Page 91 STBY V+15A C4130 1SS355-TRB D1~D8 180p CH Q4029 R4176 2SC4081(QRS)-TLB V+5HP R4252 C4138 R4192 V+15A 0.1u C4134 Q4025 GNDA 2SK209(BL)-TLB 10u/50 C4135 HP_L (HP) 0.1u R4183 R4200 C4142 R4212 GNDA (HP) (HP) 220u/16 IC4012 2W(LMF) NJM5532DD V-15A GNDA R4179 Q4030 R4193 2SA1576A(QRS)-TLB GNDA...

  • Page 92: Output Assy (6/6)

    10.20 OUTPUT ASSY (6/6) OUTPUT ASSY (DWX2676) KN301 VNF1084-A-T STBY C337 C305 0.1u D302 GNDF GNDA (Ref Gnd) D303 D308 D309 1SR154-400-TRB 1SR154-400-TRB 1SR154-400-TRB 1SR154-400-TRB CN301 B10B-EH GNDA V-15_AC GNDA D312 V+5A_AC 1SR154-400-TRB V+15_AC V+5D_AC2 GNDD P105 V+5D_AC1 AEK7017-A (3.5A) V+5D V+30_AC D310...
  • Page 93 CN302 B6B-PH-K-S MUTE MUTE MUTE V-15 V-15A V+15A GNDA V-15A V+15A V+15 CN3003 V+5D GNDA V+5D CN303 52147-0910 V+15_UNREG GNDA V+15A V-15_UNREG JH201 CAUTION - FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,REPLACE GNDA WITH SAME TYPE NO. V-15A V+5_UNREG AEK7017- 49103.5 MFD.

  • Page 94: Fader (Cross), (Ch1), (Ch2), (Ch3) And (Ch4) Assys

    10.21 FADER (CROSS), (CH1), (CH2), (CH3) and (CH4) ASSYS FADER (CROSS) ASSY (DWX2680) CN7001 173979-6 V+3R3REF2 VR_CFD GNDREF2 VR7001 DCV1006-A CN6005 CROSS FADER FADER (CH1) ASSY FADER (CH3) ASSY (DWX2681) (DWX2683) CN7301 CN7101 S4B-PH-K-Y S4B-PH-K-Y GNDREF2 V+3R3REF2 VR_FD3 VR_FD1 CN6002 CN6004 V+3R3REF2 GNDREF2...

  • Page 95: Hp Jack Assy

    10.22 HP JACK ASSY HP JACK ASSY (DWX2690) S4B-PH-K-S CN7701 L7701 JA7702 DKN1281-A VTF1093-A (HP) (HP) HP_L L7702 GNDA(HP) VTF1093-A CN4004 GNDA(HP) HP_R L7703 VTF1093-A STBY GNDHP STBY GNDF Mount JP wire by passport instruction NOTES is STBY CKSRYB AUDIO SIGNAL ROUTE (HP) : HP L CH SIGNAL DJM-700-S...

  • Page 96: Reg Assy

    10.23 REG ASSY REG ASSY (DWX2689) IC201 V+15A NJM78M15FA V+15_UNREG GND1 V+15A GND1 V-15_UNREG GND2 CN303 IC202 NJM79M15FA V-15A V+5_UNREG GND3 V+5A GND2 JH201 V-15A 51048-0900 IC203 V+5A J1(Parallel line BA05T D20PDY0910E NOTES CKSRYB GND3 DJM-700-S...

  • Page 97: Trans Assy

    10.24 TRANS ASSY TRANS ASSY (DWX2688 : KUCXJ, WYXJ5) (DWX2757 : RLXJ) POWER TRANSFORMER T1208 DTT1209 : KUCXJ DTT1208 : WYXJ5, RLXJ STBY CN102 B10B-EH P101 V-15_AC AEK7015-A-T (3A) GNDA KUCXJ, WYXJ5 P102 V+5A_AC P103 AEK7017-A-T (3.5A) V+15_AC P104 AEK7015-A-T (3A) (DKP3785-A) V+5D_AC2...

  • Page 98: Primary Assy

    10.25 PRIMARY ASSY PRIMARY ASSY (DWX2687 : KUCXJ, WYXJ5) (DWX2692 : RLXJ) CAUTION - FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,REPLACE ONLY WITH SAME TYPE NO.218.500 MFD. BY LITTELFUSE FOR FU1. (SY16-22-2) DSA1035-A T500mAL250V STBY RKP1751-A AC IN ACG7033-A AKR7001-A AKR7001-A STBY VEF1040-A...
  • Page 99 NOTES is STBY RLXJ ONLY XKX3005-A PRIMARY B3P5-VH 120V 240V STBY STBY B2P3-VH 100/120V 240V STBY ACE7027 STBY KUCXJ, WYXJ5 ONLY DJM-700-S...

  • Page 100: Voltages

    10.26 VOLTAGES Measurement Condition Input CD/LINE Nothing PHONO Nothing connectors RETURN Nothing MIC1 Nothing MIC2 Nothing Output MASTER1 Non connction MASTER2 Non connction connectors Non connction BOOTH Non connction SEND Non connction DIGITAL OUT Non connction Non connction MIC LEVEL 1 MIC LEVEL 2 MIC EQ HI Center...
  • Page 101 VOLTAGES Confirmation of microcomputer MAIN ASSY MAIN ASSY operation IC1101 (DYW1761-A/J) IC1205 (DYW1760-A/J) Pin No Voltage(V) Pin No Voltage(V) Pin No Voltage(V) Pin No Voltage(V) Although the microcomputers normally operate on the external 0.27 clock (X'tal), they may operate on the internal clock. In such a case, 1.61 performance cannot be guaranteed.
  • Page 102 MAIN ASSY PANEL 1 ASSY IC1304 (XC3S50-4TQG144C) IC5002 (NJM2903M) Pin no Voltage(V) Pin no Voltage(V) Pin no Voltage(V) Pin No Voltage(V) Pin No Voltage(V) 3.01 2.06 4.91 3.01 1.12 2.42 0.14 3.18 2.45 1.11 3.23 3.01 1.56 4.93 3.01 1.62 3.01 2.01 2.99...
  • Page 103 MAIN ASSY MAIN ASSY MAIN ASSY IC1001 (S-1200B33-M5) IC1402 (K4S641632K-UC75) IC1401 (D61OAOO3BPYPA225) Pin No Voltage(V) Pin No Voltage(V) Pin No Voltage(V) Pin No Voltage(V) Pin No Voltage(V) Pin No Voltage(V) Pin No Voltage(V) 4.98 3.22 0.07-3.24 3.12 3.04 2.87 3.24 3.05 3.12 0.09...
  • Page 104 MAIN ASSY MAIN ASSY MAIN ASSY MAIN ASSY IC1511 (WM8786GEDS/V) IC1604 (AK5358AET) IC1603 (PCM1738EG-3) IC1702 (AD1895AYRS) Pin No Voltage(V) Pin No Voltage(V) Pin No Voltage(V) Pin No Voltage(V) Pin No Voltage(V) Pin No Voltage(V) Pin No Voltage(V) Pin No Voltage(V) 3.25 2.54 3.23...

  • Page 105: Waveforms

    10.27 WAVEFORMS Waveform Measurement Conditions IN LEVEL Measure IN or OUT IN CH IN FREQUENCY Other settings Other settings (Trim Max) -6dB LINE -6dB PHONO -46dB MIC 1/2 MIC 1/2 -46dB RETURN RETURN -6dB Center the Level/Depth VR Ω MASTER1/2 CH1/CD -6dB Center all EQs/FADER at Max Ω...
  • Page 106 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram and PCB diagram. PANEL 1 ASSY INPUT ASSY VR3001 - pin4 (CH1_L) C3288 - +Side (MIC1_OUT) CN5002 - pin1,2 (FLAC1) V5000 - Pin16 (FL_BK) V: 0.2 V/div.
  • Page 107 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram and PCB diagram. PANEL 2 ASSY MAIN ASSY CN6007 - pin11 (FL_DATA) IC1303 - pin4 (20M_CPU) IC1204 - pin4 (AD/DA_RESET) R1020 & C1024 (V+1R2D) V: 2 V/div.
  • Page 108 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram and PCB diagram. MAIN ASSY IC1401 - pin143 (DATA_CH1) CN1502 - pin15 (CH3_L) IC1604 - pin9 (DATA_MIC) IC1601 - Pin3 (DATA_SEND) V: 2 V/div. H: 2 μS/div. V: 0.2 V/div.
  • Page 109 NOTE: The following waveforms were measured at the point of the corresponding balloon number in the schematic diagram and PCB diagram. OUTPUT ASSY R4227 & C4053 (MASTER_L_COLD) C4103 - +Side (RETURN_L) Q306 - COLLECTOR (POWER_RESET) V: 2 V/div. H: 200 μS/div. V: 1 V/div.

  • Page 110: Pcb Connection Diagram

    11. PCB CONNECTION DIAGRAM 11.1 INPUT, MIC1 JACK and MIC VR ASSYS SIDE A VR3001 VR3002 INPUT ASSY JA3001 JA3005 C306 J128 C3006 C3065 J154 J123 J111 J181 J180 J151 J102 C3262 C3271 J101 J107 C3292 J137 CN3011 J142 C3070 C3071 J156 J117...
  • Page 111 SIDE A 3002 VR3003 VR3004 3005 JA3007 JA3008 JA3010 C3124 C3066 C3182 C3258 C3245 C3257 C3123 C3181 C3259 C3246 J103 J111 J144 J171 J124 J101 J178 J118 C3294 C3296 C3129 C3186 C3071 C3130 C3187 J113 J127 C3132 C3074 J139 J136 J177 J114 J105...
  • Page 112 SIDE B Q3019 Q3017 Q3018 Q3016 Q3007 Q3005 Q3027 Q3024 Q3028 Q3023 Q3014 Q3012 Q3013 Q3011 IC3018 IC30 Q3022 Q3021 IC3012 IC3020 IC3025 IC3024 IC3014 Q3020 IC3019 Q301 Q3025 Q3026 Q3015 IC3021 IC3015 IC3013 IC3009 INPUT ASSY TP3432 TP3433 TP3436 TP3434 TP3435 TP3438...
  • Page 113 SIDE B Q3007 Q3005 Q3006 Q3004 IC3006 IC3008 IC3002 IC3001 Q3001 Q3002 IC3026 IC3028 Q3010 IC3007 Q3008 Q3009 Q3003 IC3009 IC3003 IC3027 TP3440 TP3441 TP3005 TP3358 TP3104 TP3438 TP3439 TP3100 TP3007 TP3101 TP3002 TP3006 TP3001 TP3098 TP3099 TP3103 TP3003 TP3102 TP3004 TP3359 TP3443...

  • Page 114: Main Assy

    11.2 MAIN ASSY SIDE A MAIN ASSY CN4002 CN4003 CN4001 CN1602 CN1603 CN1701 CN1701 CN1602 CN1603 R1582 R1526 R1530 R1528 R1584 R1586 IC1501 IC1505 IC1502 IC1506 IC1503 R1589 R1591 R1590 R1534 R1535 R1533 C1525 C1508 C1505 C1523 C1502 R1103 R1538 R1539 R1537 R1593...
  • Page 115 SIDE A CN3014 CN3004 CN3015 CN304 CN1503 CN1001 CN1501 CN1502 CN1501 CN1502 CN1503 R1532 R1586 R1588 IC1501 IC1502 IC1503 IC1508 IC1508 IC1504 IC1503 IC1507 IC1505 IC1506 IC1507 R1591 R1592 R1536 IC1504 C1508 C1529 C1512 C1527 R1540 R1539 R1595 R1596 C1716 C1003 C1717 D1507...
  • Page 116 SIDE B MAIN ASSY TP1707 TP1512 TP1515 TP1509 TP1503 TP1518 TP1508 TP1505 TP1521 TP1519 TP1514 TP1708 TP1517 TP1511 TP1507 TP1506 TP1522 TP1520 TP1516 TP1513 TP1510 C1510 C1507 TP1710 TP1709 TP1747 D1601 D1602 C1544 TP1748 TP1724 TP1004 IC1509 TP1731 C1001 TP1003 TP1749 IC1509 TP1723...
  • Page 117 SIDE B TP1504 TP1503 TP1729 TP1730 TP1615 TP1508 TP1505 TP1618 TP1702 R1770 TP1507 TP1506 TP1617 TP1502 TP1501 TP1701 TP1611 TP1612 TP1712 TP1607 TP1610 TP1703 TP1606 TP1713 TP1744 TP1714 TP1746 TP1605 TP1619 TP1608 TP1704 TP1609 TP1614 TP1705 TP1745 C1507 TP1613 TP1743 TP1706 TP1720 C1639...

  • Page 118: Panel 1 Assy

    11.3 PANEL 1 ASSY SIDE A PANEL 1 ASSY S5002 S5005 S5008 VR5000 VR5001 VR5002 J101 J302 J303 VR5012 VR5003 VR5005 VR5004 J173 J187 J192 VR5014 VR5006 VR5007 VR5008 J110 J151 J222 J219 J238 J128 D5016 J125 J144 J209 J208 J164 J226 J247...
  • Page 119 SIDE A S5014 S5011 VR5011 VR5011 J180 J228 VR5000 - VR5002 VR5013 J112 VR5013 J235 J104 S5016 S5000 J154 J136 S5012 VR5012 VR5003 - VR5005 VR5015 J107 VR5015 S5010 J123 J140 J161 D5015 J117 VR5014 VR5006 - VR5009 J188 VR5009 VR5010 VR5010 J201...
  • Page 120 SIDE B TP5123 TP5072 TP5070 TP50 TP5100 TP5099 IC5002 TP5098 TP5091 TP5101 TP5090 TP5103 C5019 TP5104 TP5089 TP5105 TP5106 TP5088 TP5107 TP5087 TP5102 Q5016 TP5149 TP5086 TP5056 TP5012 TP5148 Q5017 TP5085 TP5111 TP5055 TP5084 Q5018 TP5054 TP5147 TP5011 TP5083 TP5010 TP5146 Q5019 TP5053...
  • Page 121 SIDE B PANEL 1 ASSY TP5049 TP5047 TP5064 TP5066 TP5046 TP5045 TP5062 TP5048 TP5061 TP5060 TP5110 TP5108 TP5109 TP5059 TP5154 TP5120 TP5153 TP5113 TP5114 TP5112 TP5155 TP5152 TP5058 TP5156 TP5151 TP5057 TP5157 TP5158 TP5116 TP5075 IC5000 TP5121 TP5073 TP5069 TP5067 TP5118 TP5117 C5056...

  • Page 122: Panel 2, Fader (Cross), (Ch1), (Ch2), (Ch3) And (Ch4) Assys

    11.4 PANEL 2, FADER (CROSS), (CH1), (CH2), (CH3) and (CH4) ASSYS SIDE A FADER FADER FADER (CH1) (CH2) (CH3) ASSY ASSY ASSY (DNP2295-A) (DNP2295-A) (DNP2295-A) CN7101 CN7201 CN7301 CN7101 CN7201 CN7301 CN6002 CN6003 CN6004 PANEL 2 ASSY VR6003 J212 J225 J222 S6004 S6006...
  • Page 123 SIDE A ADER FADER CH3) (CH4) ASSY ASSY NP2295-A) (DNP2295-A) CN7301 CN7401 VR6004 VR6004 CN7301 CN7401 CN6004 CN6006 S6005 S6003 VR6003 VR6001 VR6001 J236 CN6007 J215 S6009 S6008 VR6005 S6007 VR6002 VR6002 J232 S6010 D6003 D6004 CN6005 CN6007 (DNP2293-A) CN5001 NOTE: The encircled numbers denote measuring point.
  • Page 124 SIDE B FADER FADER (CH3) (CH4) ASSY ASSY PANEL 2 ASSY (DNP2295-A) (DNP2295-A) TP6083 TP6069 TP6061 TP6130 TP6133 TP6132 TP6131 TP6129 CN7401 CN7301 CN6006 CN6004 TP6079 TP6080 TP6081 TP6078 TP6082 TP6077 TP6060 TP6103 TP6104 TP6110 TP6076 TP6075 TP6071 TP6047 TP6072 TP6048 TP6137 TP6049...
  • Page 125 SIDE B FADER FADER FADER (CH3) (CH2) (CH1) ASSY ASSY ASSY (DNP2295-A) 2295-A) (DNP2295-A) CN7201 CN7101 CN6003 CN6002 TP6043 TP6031 TP6044 TP6032 TP6045 TP6033 TP6059 TP6046 TP6034 TP6145 TP6144 TP6056 TP6053 IC6002 IC6002 TP6143 TP6142 TP6084 6114 TP6116 TP6107 TP6087 TP6117 TP6105 TP6085...

  • Page 126: Output And Hp Jack Assys

    11.5 OUTPUT and HP JACK ASSYS SIDE A IC4012 Q303 Q305 Q301 IC303 IC304 Q308 OUTPUT ASSY S4002 JA4009 T4001 C4107 C4108 C4105 J4070 C4106 C4090 C4104 J4087 J4058 C4143 HP JACK ASSY C4103 C4119 C4142 J4076 J4116 J4030 J4124 CN4004 Q305 C317...
  • Page 127 SIDE A Q305 Q301 Q302 IC301 IC4003 IC4004 JA4003 S4001 JA4001 JA4002 J4036 J4068 C4078 J4067 C4077 J4042 J4014 C4075 J4018 C4067 C4001 J4104 C4027 C4106 J4064 J4017 J4115 J4144 J4099 J4051 J4080 C4029 J4121 J4085 J4119 J4081 C4031 J4146 C4025 C4017 C4023...
  • Page 128 SIDE B Q4011 Q4012 Q4009 Q4016 Q4016 Q4015 IC4006 IC4001 Q4020 Q4019 Q4017 Q4014 Q4018 Q4008 Q4004 IC4002 IC4007 Q4118 Q4002 Q4007 Q4003 Q4005 Q4001 IC302 Q307 Q403 OUTPUT ASSY TP4257 TP4256 TP4258 TP4255 TP4124 TP4123 TP4158 TP4159 TP4251 TP4098 TP4097 TP4253 TP4122...
  • Page 129 SIDE B IC4009 Q4021 Q4034 Q4024 Q4022 Q4028 IC4010 Q4020 Q4019 Q4026 Q4032 IC4008 Q4017 IC4011 Q4033 Q4031 Q4018 IC4007 Q4023 Q4025 Q4030 Q4029 Q307 Q4036 Q4035 Q4027 TP4166 TP4168 TP4162 TP4169 TP4243 TP4237 TP4167 TP4163 TP4164 TP4195 TP4130 TP4193 TP4194 TP4165 TP4157 TP4175...

  • Page 130: Reg, Trans And Primary Assys

    11.6 REG, TRANS and PRIMARY ASSYS SIDE A TRANS ASSY P101 P102 P103 P104 P312 P107 (DNP22 PRIMARY ASSY DJM-700-S...
  • Page 131 SIDE A CN303 REG ASSY JH201 JH201 IC201 IC203 IC202 (DNP2294-A) (DNP2294-A) (DNP2294-A) AC IN DJM-700-S...
  • Page 132 SIDE B REG ASSY JH201 D201 D202 C206 C201 C202 C203 C204 C205 (DNP2294-A) PRIMARY ASSY N O P DJM-700-S...
  • Page 133 SIDE B TRANS ASSY C107 C106 C105 C104 C103 C102 C110 C109 C108 C101 D301 R101 (DNP2294-A) TP10 (DNP2294-A) DJM-700-S...

  • Page 134: Pcb Parts List

    Ex.2 When there are 3 effective digits (such as in high precision metal film resistors). 5.62k Ω 562 x 10 5621 RN1/4PC 5 6 2 1 LIST OF WHOLE PCB ASSEMBLIES DJM-700-S DJM-700-S DJM-700-S DJM-700-K DJM-700-K DJM-700-K Mark Symbol and Description /KUCXJ /WYXJ5 /RLXJ /KUCXJ /WYXJ5 /RLXJ 1..MAIN ASSY...
  • Page 135 PCB PARTS LIST FOR DJM-700-S/KUCXJ UNLESS OTHER WISE NOTED Mark No. Description Part No. Mark No. Description Part No. R3298,3299,3303 RS1/16S3302D INPUT ASSY R3301,3302,3304 RN1/16SE2000D R3305,3306,3309 RS1/16S1002D SEMICONDUCTORS R3307,3308,3310,3311 RS1/16S3301D IC3001,3002,3007,3008 NJM2121MD R3317,3319 RN1/16SE2200D IC3003,3006,3009,3012 NJM4580MD IC3013,3014,3019,3020 NJM2121MD R3375-3380 RS1/10S0R0J IC3015,3018,3021 NJM4580MD Other Resistors...
  • Page 136 Mark No. Description Part No. Mark No. Description Part No. CN1201 31P CONNECTOR VKN1435 MIC1 JACK ASSY CN1501 30P CONNECTOR VKN1434 MISCELLANEOUS CN1502 16P CONNECTOR VKN1420 CN1503 CONNECTOR AKM1279 JA7501 CONNECTOR DKN1136 CN1602 CONNECTOR AKM1282 CN7502 PLUG CKS3153 CN1701 9P CONNECTOR VKN1413 RESISTORS MIC VR ASSY...
  • Page 137 Mark No. Description Part No. Mark No. Description Part No. C1409,1454,1601,1602 CKSRYB103K50 D5044,5060,5061,5076 SLR-343VC(NPQ) C1410-1453,1456 CKSRYB104K25 D5062-5065,5078-5081 SLI-343YYW(RST) C1458-1463,1502,1503 CKSRYB104K25 D5066-5074,5082-5090 SLR-343MC(NPQ) C1501,1504,1507,1510 CEVW100M25 D5077,5094,5095,5109 SLR-343VC(NPQ) C1505,1506,1508,1509 CKSRYB104K25 D5091-5093,5124-5126 1SS355 C1511,1514,1633,1635 CEVW100M25 D5096-5099,5111-5114 SLI-343YYW(RST) C1512,1513,1523-1530 CKSRYB104K25 D5100-5108,5115-5123 SLR-343MC(NPQ) C1515-1522,1531-1538 CCSRCH101J50 D5110 SLR-343VC(NPQ) C1539,1540,1543-1546...
  • Page 138 Mark No. Description Part No. Mark No. Description Part No. CN6001 31P CONNECTOR VKN1262 JA4004-4007 HP JACK DKN1452 CN6002,6004 CONNECTOR B4B-PH-K-Y JA4008 JACK BOARD PKB1033 CN6003,6006 CONNECTOR B4B-PH JA4009 CONNECTOR DKN1188 CN6005 WIRE ASSEMBLY PG06MR-E07 KN301,4001 WRAPPING TERMINAL VNF1084 CN6007 CONNECTOR 13P 52492-1320 S4001 SLIDE SWITCH DSH1063...
  • Page 139 Mark No. Description Part No. Mark No. Description Part No. CAPACITORS FADER (CROSS) ASSY C301,303,307 CKSRYB473K50 MISCELLANEOUS C302,304,306,308 CKSRYB473K25 C305,318-320,322 CKSRYB104K25 VR7001 VARIABLE RESISTOR DCV1006 C309,4026,4028,4030 CKSRYB473K25 CN7001 CONNECTOR(MT) 173979-6 C310 CEHAT471M50 C311 CEAT682M25 C312 CEAT102M25 FADER (CH1) ASSY C313 CKSQYB105K16 C314,315 CEAT332M35...
  • Page 140 Mark No. Description Part No. TRANS ASSY MISCELLANEOUS CONNECTOR ASSY DKP3785 CN102 10P TOP POST B10B-EH RESISTORS All Resistors RS1/16S###J MISCELLANEOUS P101,103 PROTECTOR (3 A) AEK7015 P102,104 PROTECTOR (3.5 A) AEK7017 P312 PROTECTOR (750 mA) AEK7007 PRIMARY ASSY MISCELLANEOUS FILTER DTL1131 H2,3 FUSE CLIP...

This manual is also suitable for:

Djm-700-s

Table of Contents

Save PDF