unauthorized users at all times. TOSHIBA is not liable for any failure or
damage that might arise out of the use of the fingerprint software.
Set up Fingerprint Registration
Use the following procedure when first using fingerprint authentication.
1.
2.
3.
4.
5.
6.
7.
User's Manual
The fingerprint sensor compares and analyzes the unique
characteristics in a fingerprint. However, there might be instances
where certain users are unable to register their fingerprints due to
insufficient unique characteristics in their fingerprints.
The recognition success rate might differ from user to user.
In use, the fingerprint authentication system uses the same username
and password as defined within the Windows operating system. If no
Windows password has been configured, you must do this before
starting the fingerprint registration process.
This sensor has the memory space for at least twenty fingerprint
patterns. You might be able to register more fingerprint patterns
depending on the sensor memory usage.
Click Start -> All Programs -> TOSHIBA -> Tools & Utilities ->
Fingerprint Utility.
The Enroll screen is displayed. Enter the current account password
into the Windows Password field. If no Windows password has been
configured, you will be asked to configure the new logon password.
Then click Next.
Click the non-enrolled finger you want to register and then click Next.
The instructions for enrollment operation screen is displayed. Carefully
read them and then click Next.
The scanning practice screen is displayed. You are able to practice
swiping (three times) your finger to ensure you use the correct
method. When you have finished practicing swiping your finger, click
Next.
Swipe four times with the same finger. If scanning of fingerprint
succeeds, "Enrollment succeeded! Do you want to save this
fingerprint?" message box appears. Click OK.
The following message appears: "It's strongly recommended you
enroll one more fingerprint.". Click OK and repeat Step 3, 4, 5 and 6
with another finger.
It is strongly recommended that you register 2 or more fingerprints.
You cannot enroll the same fingerprint more than once, even on a
different user account.
4-13