CONTENTS BEFORE USE BEFORE USE IMPORTANT • To ensure proper use, please read through this manual before using this product. It is especially important BASICS that you read and observe Warning and Caution in this manual. • Please keep the manual in a safe and accessible place for future reference. GETTING STARTED 1 Select the display language Warning...
BASICS Faceplate Remote control (RC-406) Loading slot Display window Remote sensor (Do not expose to bright sunlight.) Pull out the insulation sheet when using for the * Not used first time. How to replace the battery Reset button Volume knob •...
GETTING STARTED To set the date Turn the volume knob to select [DATE FORMAT], then press the knob. Turn the volume knob to select [DD/MM/YY] or [MM/DD/YY], then press the knob. Turn the volume knob to select [DATE SET], then press the knob. Turn the volume knob to make the settings, then press the knob.
YES: Starts upgrading the firmware. ; NO: Cancels (upgrading is not activated). • To store a station: Press and hold one of the number For details on how to update the firmware, see: www.kenwood.com/cs/ce/ buttons (1 to 6). • To select a stored station: Press one of the number CLOCK buttons (1 to 6) (or press one of the number buttons...
Page 6
RADIO Direct Access Tuning (using RC-406) AF SET ON: Automatically searches for another station broadcasting the same program in the same Radio Data System network with better reception Press DIRECT to enter Direct Access Tuning. when the current reception is poor. ; OFF: Cancels. Press the number buttons to enter a frequency.
Do not leave the cable inside the car when not using. When connecting an Android device, “Press [VIEW] to install KENWOOD MUSIC PLAY APP” is shown. Follow the instructions to install the application. You can also install the latest version of KENWOOD MUSIC PLAY application on your Android device before connecting.
Page 8
IPOD/ ANDROID source, While in ANDROID source, press iPod USB press iPod USB. repeatedly. BROWSE MODE : Control Android device from this unit via KENWOOD MUSIC On the faceplate On the remote control PLAY application installed in the Playback / pause...
Page 9
CD / USB / iPod / ANDROID Listen to TuneIn Radio/ TuneIn Radio Pro/ Aupeo Direct Music Search (using RC-406) While listening to TuneIn Radio, TuneIn Radio Pro or Aupeo, connect the Press DIRECT. iPod/iPhone to the USB input terminal of the unit. Press the number buttons to enter a track/file number.
Pandora® Preparation: Create and save a new station Install the latest version of the Pandora application on your device Press (iPhone/ iPod touch), then create an account and log in to Pandora. Turn the volume knob to select [NEW STATION], then press the knob. •...
AUDIO SETTINGS Pandora® While listening to any source... Delete a station Press AUD to enter [AUDIO CONTROL] directly. While listening to PANDORA... Turn the volume knob to select an item (see the following table), then press the Press the volume knob to enter [FUNCTION]. knob.
DISPLAY SETTINGS AUDIO SETTINGS PRESET EQ DRIVE EQ/ TOP40/ POWERFUL/ ROCK/ POPS/ EASY/ JAZZ/ NATURAL/ USER: Selects a preset equalizer suitable to the music genre. (Select [USER] to use the settings made in [EQ PRO].) [DRIVE EQ] is a preset equalizer that reduces noise outside the car or running noise of the tyres.
TROUBLESHOOTING DISPLAY SETTINGS Default: XX Symptom Remedy COLOR SELECT Select color for ALL ZONE, ZONE 1 and ZONE 2 separately. • Adjust the volume to the optimum level. Sound cannot be heard. • Check the cords and connections. 1 Select a zone. ( 12) 2 Select a color for the selected zone.
Page 14
( 15) Muting upon the reception of a phone call • Make sure KENWOOD MUSIC PLAY APP is installed on the Cannot playback at Connect the MUTE wire to your telephone using a commercial telephone accessory. ( 19) [BROWSE MODE].
- iPhone 3G, 3GS, 4, 4S, 5, 5S, 5C, 6, 6 Plus – Any other latest information • You cannot operate iPod if “KENWOOD” or “ ” is displayed on iPod. • Depending on the version of the operating system of the iPod/iPhone, some functions may not operate General on this unit.
SPECIFICATIONS REFERENCES Change the display information FM Frequency Range 87.5 MHz — 108.0 MHz (50 kHz space) Each time you press DISP, the display information changes. Channel Space Selection 50 kHz • If the information is unavailable or not recorded, “NO TEXT”, “NO INFO”, or other information (eg.
Page 17
SPECIFICATIONS Laser Diode GaAIAs Maximum Output Power 50 W × 4 Digital Filter (D/A) 8 times over sampling Full Bandwidth Power 22 W × 4 (at less than 1 % THD) Spindle Speed 500 rpm — 200 rpm (CLV) Speaker Impedance 4 Ω — 8 Ω Wow & Flutter Below measurable limit Tone Action Bass 100 Hz ±8 dB Frequency Response (±1 dB)
Warning Installing the unit (in-dash mounting) • The unit can only be used with a 12 V DC power supply, negative ground. Install onto the car brackets using the supplied screws (C) or (D). The screw holes differ depending on • Disconnect the battery’s negative terminal before wiring and mounting. the model of the cars.
Brown when the telephone rings or To front speaker (right) Gray/Black (Mute control wire) during conversation ( 14) (To connect the Kenwood Green (C) Round head screws navigation system, refer your To rear speaker (left) (M5 × 8 mm) Green/Black navigation manual.)
Page 20
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.
Page 21
• “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.