1.
If the device is not on, switch it on. Check for
adequate signal strength. Depending on your
device, you may also need to complete the
following:
Insert a SIM card if your device uses one
●
Remove certain call restrictions you have
●
activated in your device.
Change your profile from offline or flight
●
profile mode to an active profile.
2.
Press the end key as many times as needed to
clear the display and ready the device for calls.
3.
Enter the official emergency number for your
present location. Emergency numbers vary by
location.
4.
Press the call key.
When making an emergency call, give all the
necessary information as accurately as possible.
Your wireless device may be the only means of
communication at the scene of an accident. Do not
end the call until given permission to do so.
CERTIFICATION INFORMATION
(SAR)
This mobile device meets guidelines for
exposure to radio waves.
190
Your mobile device is a radio transmitter and
receiver. It is designed not to exceed the limits for
exposure to radio waves recommended by
international guidelines. These guidelines were
developed by the independent scientific
organization ICNIRP and include safety margins
designed to assure the protection of all persons,
regardless of age and health.
The exposure guidelines for mobile devices employ
a unit of measurement known as the Specific
Absorption Rate or SAR. The SAR limit stated in the
ICNIRP guidelines is 2.0 watts/kilogram (W/kg)
averaged over 10 grams of tissue. Tests for SAR are
conducted using standard operating positions with
the device transmitting at its highest certified
power level in all tested frequency bands. The actual
SAR level of an operating device can be below the
maximum value because the device is designed to
use only the power required to reach the network.
That amount changes depending on a number of
factors such as how close you are to a network base
station. The highest SAR value under the ICNIRP
guidelines for use of the device at the ear is 0.91 W/
kg.
Use of device accessories and enhancements may
result in different SAR values. SAR values may vary
depending on national reporting and testing
requirements and the network band. Additional SAR