hit counter script
Panasonic TC-P55ST60 Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Plasma TV
  5. Viera TC-P55ST60
  6. Service manual

Panasonic TC-P55ST60 Service Manual

55 inch class 1080p plasma hdtv
Hide thumbs Also See for TC-P55ST60:
Table of Contents

Advertisement

Quick Links

See also: Owner's Manual , Technical Manual
For detailed troubleshooting information and circuit explanations,
refer to the "QSM/Service Hints/Troubleshooting Information(TI)" and Seminar/Training Manual/Technical
Guide(TG) documents posted on the TSN web site.
For information about this model, type TC-P2013 in the model box under "Direct Search".
55 inch Class 1080p Plasma HDTV
TC-P55ST60
Model No.
GPF16DU Chassis
© Panasonic Corporation 2013.
Unauthorized copying and distribution is a violation
of law.
ORDER NO.MTNC130227CE
B34 Canada: B62

Advertisement

Table of Contents
loading

Related Manuals for Panasonic TC-P55ST60

Summary of Contents for Panasonic TC-P55ST60

  • Page 1 "QSM/Service Hints/Troubleshooting Information(TI)" and Seminar/Training Manual/Technical Guide(TG) documents posted on the TSN web site. For information about this model, type TC-P2013 in the model box under "Direct Search". © Panasonic Corporation 2013. Unauthorized copying and distribution is a violation of law.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Safety Precautions -----------------------------------------------3 1.1. General Guidelines ----------------------------------------3 2 Warning --------------------------------------------------------------4 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices ----------4 2.2. About lead free solder (PbF) ----------------------------5 3 Service Navigation------------------------------------------------6 3.1. PCB Layout --------------------------------------------------6 4 Specifications ------------------------------------------------------7 5 Technical Descriptions------------------------------------------8 5.1.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. When conducting repairs and servicing, do not attempt to modify the equipment, its parts or its materials. 2. When wiring units (with cables, flexible cables or lead wires) are supplied as repair parts and only one wire or some of the wires have been broken or disconnected, do not attempt to repair or re-wire the units.

  • Page 4: Warning

    2 Warning 2.1. Prevention of Electrostatic Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor [chip] components.

  • Page 5: About Lead Free Solder (Pbf)

    2.2. About lead free solder (PbF) Note: Lead is listed as (Pb) in the periodic table of elements. In the information below, Pb will refer to Lead solder, and PbF will refer to Lead Free Solder. The Lead Free Solder used in our manufacturing process and discussed below is (Sn+Ag+Cu). That is Tin (Sn), Silver (Ag) and Copper (Cu) although other types are available.

  • Page 6: Service Navigation

    3 Service Navigation 3.1. PCB Layout Board Name Function Power Supply Main AV input, processing Remote receiver, Power LED, C.A.T.S sensor Data Driver (Lower Right) Data Driver (Lower Center) Data Driver (Lower Left) Scan Drive Sustain Drive Sustain out (Lower) Scan out (Upper) Non serviceable.

  • Page 7: Specifications

    3D Eyewear Battery Coin-shaped lithium battery CR2025 Operation time: Approx. 75 hours in continuous use of the battery made by Panasonic • Use Panasonic 3D Eyewear supporting Bluetooth wireless technology. Note Design and Specifications are subject to change without notice. Mass and Dimensions shown are approximate.

  • Page 8: Technical Descriptions

    5 Technical Descriptions 5.1. Specification of KEY for DTCP-IP, WMDRM and Widevine 5.1.1. General information: 1. NAND Flash (IC8900) for spare parts has the seed of KEY for each DTCP-IP for DLNA, WMDRM for Netflix and Widevine for CinemaNow. 2. The final KEY data will be generated by Main IC (IC8000) when SELF CHECK was done and are stored in both Main IC (IC8000) and NAND Flash (IC8900).

  • Page 9: Service Mode

    6 Service Mode 6.1. How to enter into Service Mode 6.1.1. Purpose After exchange parts, check and adjust the contents of adjustment mode. While pressing [VOLUME ( - )] button of the main unit, press [INFO] button of the remote control three times within 2 seconds Note: Service Mode can not be entered when 3D signal input.

  • Page 10: Contents Of Adjustment Mode

    Contents of adjustment mode 6.1.4. • Value is shown as a hexadecimal number. • Preset value differs depending on models. • After entering the adjustment mode, take note of the value in each item before starting adjustment. Main item Sub item Sample Data Remark ADJUST...

  • Page 11: Option - Mirror

    6.2. Option - Mirror Picture can be reversed left and right or up and down. 00 : Default (Normal picture is displayed) 01 : Picture is reversed left and right. 02 : Picture is reversed up and down. Hint : If the defective symptom (e.g. Vertical bar or Horizontal bar) is moved by selection of this mirror, the possible cause is in A-board.

  • Page 12: Hotel Mode

    6.4. Hotel mode 1. Purpose Restrict a function for hotels. Item Function 2. Access command to the Hotel mode setup menu Mode Select hotel mode On/Off In order to display the Hotel mode setup menu: Input Select input signal modes. While pressing [VOLUME (-)] button of the main unit, Set the input, when each time power is switched on.

  • Page 13: Data Copy By Usb Memory

    6.5. Data Copy by USB Memory Note: SD card can not be used for Data Copy. 6.5.1. Purpose (a) Board replacement (Copy the data when exchanging A-board): When exchanging A-board, the data in original A-board can be copied to USB Memory and then copy to new A-board. (b) Hotel (Copy the data when installing a number of units in hotel or any facility): When installing a number of units in hotel or any facility, the data in master TV can be copied to USB Memory and then copy to other TVs.
  • Page 14 6.5.3. Data copy from TV set to USB Memory 1. Turn on the TV set. 2. Insert USB Memory with a startup file (pwd file) to USB terminal. On-screen Display will be appeared according to the startup file automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2770 (b) For Hotel : 4850 Data will be copied from TV set to USB Memory.
  • Page 15 6.5.4. Data copy from USB Memory to TV set 1. Turn on the TV set. 2. Insert USB Memory with Data to USB terminal. On-screen Display will be appeared according to the Data folder automatically. 3. Input a following password for (a) or (b) by using remote control. (a) For Board replacement : 2771 (b) For Hotel : 4851 Data will be copied from USB Memory to TV set.

  • Page 16: Troubleshooting Guide

    7 Troubleshooting Guide For detailed troubleshooting information and circuit explanations, refer to the "QSM/Service Hints/Troubleshooting Information(TI)" and Seminar/Training Manual/Technical Guide(TG) documents posted on the TSN web site. For information about this model, type TC-P2013 in the model box under "Direct Search".

  • Page 17: Service Fixture & Tools

    8 Service Fixture & Tools 8.1. SC jig Purpose: To find the failure board (SC or SU/SD) when the power LED is blinking 7 times. SC jig: Jumper connector to connect to SC50 connector on SC board Part number: TZSC09187 How to use: Caution: Remove SC jig from SC board after inspection.

  • Page 18: Disassembly And Assembly Instructions

    9 Disassembly and Assembly Instructions 9.1. Disassembly Flow Chart for the Unit This is a disassembly chart. When assembling, perform this chart conversely.

  • Page 19: Disassembly Procedure For The Unit

    9.2. Disassembly Procedure for the Unit 9.2.1. Remove the Pedestal stand 9.2.4. Remove the Wi-Fi module 1. Remove the Plasma panel section from the servicing 1. Remove the screw (×1 ) and remove the Wi-Fi stand and lay on a flat surface such as a table (covered module.
  • Page 20 9.2.7. Remove the P-Board 8. Remove the screws (×2 9. Remove the Heatsink (bottom) and the Thermal pad. Caution: To remove P.C.B. wait 1 minute after power was off for discharge from electrolysis capacitors. 1. Unlock the hooks and the tapes to free the cables 2.

  • Page 21: Remove The Woofer

    9.2.11. Remove the Woofer 9.2.13. Remove the SD-Board 1. Unlock the hooks and the tapes to free the cables. 1. Disconnect the flexible cables (SD1, SD2, SD3, SD4 and 2. Disconnect the Relay connector. SD5) connected to the SD-Board. 2. Disconnect the flexible cable (SU11-SD11) and the bridge 3.
  • Page 22 9.2.15. Work instructions for the Rubber 9.2.17. Work instructions for the Rubber sheet for SC-Board sheet for SS-Board 1. Rubber sheets are put between the board and rear cover 1. Rubber sheets are put between the board and rear cover for EMC requirement and heat radiation.
  • Page 23 9.2.20. Remove the Metal bracket bottom 9.2.23. Remove the Cabinet assy from the Plasma panel section , ×2 1. Remove the screws (×6 ) and the Metal bracket bottom. 1. Place the Cabinet assy on a flat surface of a table (covered by a soft cloth) and a cushion.

  • Page 24: Remove The Contact Metals

    9.2.24. Remove the Contact metals 9.2.27. Remove the C3-Board 1. Disconnect the flexible cables (CB12, CB13, CB14 and 1. Remove the screws (×18 CB15). 2. Remove the Contact metal side (L, R). 2. Disconnect the flexible cables (C31 and C36). 3.

  • Page 25: Measurements And Adjustments

    10 Measurements and Adjustments 10.1. Adjustment 10.1.1. Vsus selection Caution: When Plasma panel or A-board is replaced, Vsus should be set to LOW or HIGH. Procedure 1. Go into main item [VSUS] in Service Mode. LOW or HIGH will be displayed. 2.

  • Page 26: White Balance Adjustment

    10.1.2. White balance adjustment Name of measuring instrument Remarks Color analyzer (Minolta CS-1000 or equivalent) Procedure Remarks 1. Enter the Service mode. 2. Receive the Analog-RF (except for no signal) or set CVBS/YUV/HDMI (no signal is available). 3. Select [WB-ADJ] by using [1] and [2] key in the remote controller. 4.

  • Page 27: Block Diagram

    11 Block Diagram 11.1. Main Block Diagram MAIN AV INPUT,PROCESSING HDMI1-3 (HDMI2) TMDS DATA ETHERNET DATA HDMI I/F LAN_TX/RX ETHERNET ASPDIF1 SD CARD DATA IF_P/N SD CARD I/F SD CARD TUNER IF_P/N USB_DP/DN PARAGON USB0-3_DP/DN USB1-2 USB_DP/DN WiFi V/YPbPr/RGB VIDEO/ V/YPbPr/RGB AV IN COMPONENT...

  • Page 28: Block (1/4) Diagram

    11.2. Block (1/4) Diagram JK8600 SPEAKER_L SPEAKER_R WOOFER D3101 SD CARD DIGITAL JK8650A JK8601A JK8602A JK8605 JK4701B JK4702B JK4703B AUDIO TU6706 ETHERNET USB1 USB2 WiFi MAIN AV INPUT,PROCESSING TER IN HDMI1 HDMI2 HDMI3 TUNER IIC2 IC4900 IC4901 USB_DP/DN AUDIO AMP AUDIO AMP2 IIC0 PA4900...

  • Page 29: Block (2/4) Diagram

    11.3. Block (2/4) Diagram MAIN AV INPUT,PROCESSING USB_DP/DN IC9300 PD6H VIDEO DATA PLASMA AI VIDEO DATA LVDS DATA H/V Sync Control VIDEO DATA Sub Filed Processor P3.3V IC9803 P1.2V P3.3V DCDCIN P1.2V KEYSCAN IIC0 KEYSCAN +1.2V 1.2V KEY3 KEY3 IC9005 P2.5V 3.3V_DET1 DCDCEN2...

  • Page 30: Block (3/4) Diagram

    11.4. Block (3/4) Diagram POWER SUPPLY COLD COLD Q300-Q303 D105 F102 RESONANCE Q600 T301 D600 Q100 IC600 L100 Q101 L101 T303 CONTROL ERROR DET Q102 Q103 T302 Q701 D700 Q702 IC100 D704 IC300 Q601 DRIVER Vsus Q602 Vsus RESONANCE D302 CONTROL SS11 Q004...

  • Page 31: Block (4/4) Diagram

    11.5. Block (4/4) Diagram SCAN DRIVE SCAN OUT (UPPER) SUSTAIN DRIVE Reference Voltage SRV_VF5V TPVSUS Vsus Lo : 210V SRV_VSUS Vsus Hi : 215V IC16784,85 Reference Voltage IC14601-03 Vsus Vad = 200 5V(VFG_BASE) PC16897 Reference Voltage SRV_VFO SVR_VSUS TPVSUS Vsus Lo : 210V IPD CIRCUIT TPVAD Vsus Hi : 215V...

  • Page 33: Wiring Connection Diagram

    12 Wiring Connection Diagram 12.1. Caution statement. Caution: Please confirm that all flexible cables are assembled correctly. Also make sure that they are locked in the connectors. Verify by giving the flexible cables a very slight pull. 12.2. Wiring (1)

  • Page 34: Wiring (2)

    12.3. Wiring (2)

  • Page 35: Wiring (3)

    12.4. Wiring (3)

  • Page 36: Wiring (4)

    12.5. Wiring (4) 12.6. Wiring (5)
  • Page 37 Model No. : TC-P55ST60 Exploded View 1 1 / 3...
  • Page 38 Model No. : TC-P55ST60 Exploded View 2 2 / 3...
  • Page 39 Model No. : TC-P55ST60 Accessories 3 / 3...
  • Page 40 Print Parts List Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks TXN/A1UHUUS CIRCUIT BOARD A 1 (RTL)PAVCA TXNC31URUUS CIRCUIT BOARD C3 1 (RTL)PAVCA TZRNP06URUU CIRCUIT BOARD C1 1 (RTL)PAVCA TZRNP07URUU CIRCUIT BOARD C2...
  • Page 41 C 0.1UF 16V C2010 F1G1A105A047 C 1UF 10V C2013 F1G1E103A059 C 0.01UF 25V C2014 F1G1E103A059 C 0.01UF 25V Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C2019 F1G1E103A059 C 0.01UF 25V...
  • Page 42 C 100PF, J, 16V C5013 F1G1A105A047 C 1UF 10V C5014 F1G1A105A047 C 1UF 10V C5015 F1G1A105A047 C 1UF 10V Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C5016 F1G1A105A047 C 1UF 10V...
  • Page 43 Print Parts List Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C8110 F1G1C183A146 C 0.018UF, 16V 1 PAVCA C8111 F1G1C104A077 C 0.1UF 16V C8112 F1K1V106A010 C 10UF, 25V 1 PAVCA C8114...
  • Page 44 C 1UF 10V C9325 F1G1A105A047 C 1UF 10V C9326 F1G1A105A047 C 1UF 10V C9335 F1J1A106A043 C 10UF, 10V Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C9336 F1J1A106A043 C 10UF, 10V...
  • Page 45 C 1 uF 16 V C16193 F2A1E1010130 E 100UF, 25V C16195 F1K1E105A029 C 1UF, 25V C16202 F0C2E225A286 C 2.2UF, 250V 1 PAVCA Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C16203 F0C2E225A286 C 2.2UF, 250V...
  • Page 46 C 1UF, 10V C17331 F1L2E224A028 C 0.22UF, 250V C17334 F1L2E224A028 C 0.22UF, 250V C17335 F1L2E224A028 C 0.22UF, 250V Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks C17338 F1L2E224A028 C 0.22UF, 250V...
  • Page 47 D503 B0AAFK000004 DIODE 1 PAVCA D504 DA2J10100L DIODE D505 B0ECKM000053 DIODE D506 DZ2J100M0L ZENER DIODE Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks D507 DZ2J051M0L ZENER DIODE D509 DZ2J100M0L ZENER DIODE...
  • Page 48 DA2J10100L DIODE D16134 DZ2J051M0L ZENER DIODE D16135 DA2J10100L DIODE D16191 B0ECKP000055 DIODE D16192 DA2J10100L DIODE Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks D16196 DZ2J051M0L ZENER DIODE D16243 DA3X103E0L DIODE D16251...
  • Page 49 1 PAVCA IC16603 C0JBAA000344 IC16725 C1ZBZ0004715 1 PAVCA IC16784 MIP3910MSSCF IC16785 C0DBZYY00532 1 PAVCA IC16786 MIP3910MSSCF IC16787 C0DBZYY00532 1 PAVCA Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks IC16795 C0CBALC00012 IC16921 C1ZBZ0004557...
  • Page 50 L16045 G0ZZ00002737 PEAKING COIL 1 PAVCA L16046 G0ZZ00002737 PEAKING COIL 1 PAVCA L16047 G0ZZ00002737 PEAKING COIL 1 PAVCA Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks L16070 G0ZZ00002183 PEAKING COIL L16071...
  • Page 51 Q004 B1CHPD000013 1 PAVCA Q100 B1CERR000079 1 PAVCA Q101 B1CERR000079 1 PAVCA Q102 B1ABPF000011 TRANSISTOR 1 PAVCA Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks Q103 B1ABPF000011 TRANSISTOR 1 PAVCA Q104...
  • Page 52 R129 D1BB3242A073 M32.4KOHM,J.1/10W 1 PAVCA R131 D0GB104JA065 M 100KOHM J 1/10W R132 D1BD3303A076 M 330KOHM.F.1/8W 1 PAVCA Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R134 D1AB3004A023 M 3MOHM J 1/4W...
  • Page 53 M 1KOHM,J,1/10W R516 D0GB101JA065 M 100 OHM,J,1/10W R517 D0GD101JA052 M 100 OHM,J,1/8W R518 ERX2SJR30E M 0.3HM,J, 2W 1 PAVCA Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R521 D0GB102JA065 M 1KOHM,J,1/10W...
  • Page 54 1 PAVCA R728 D0GB102JA065 M 1KOHM,J,1/10W R729 D0GB333JA065 M 33KOHM,J,1/10W R730 D0GB103JA065 M 10K OHM J 1/10W Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R731 D0GB103JA065 M 10K OHM J 1/10W...
  • Page 55 R5005 D0GA223JA023 M 22K OHM J 1/16W R5006 D0GA154JA023 M 150KOHM J 1/16W R5008 D0GA473JA039 M 47KOHM, J,1/16W 1 PAVCA Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R5009 D0GA103JA039 M10KOHM, J.1/16 W...
  • Page 56 R8614 D0GA272JA023 M 2.7KOHM, J.1/16W R8615 D0GA272JA023 M 2.7KOHM, J.1/16W R8618 D1BA3742A023 M 37.4 KOHM,F.1/16 W 1 PAVCA Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R8619 D1BA3742A023 M 37.4 KOHM,F.1/16 W...
  • Page 57 Print Parts List R9119 D1BA8201A023 M 8.2 KOHM,F.1/16 W 1 PAVCA Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R9126 D0GA101JA039 M 100 OHM, J,1/16W 1 PAVCA R9160 D0GA103JA039 M10KOHM, J.1/16 W...
  • Page 58 1 PAVCA R16441 D0GF5R6JA047 M 5.6 OHM,J, 1/3W R16451 D0GF5R6JA047 M 5.6 OHM,J, 1/3W R16452 D0GF5R6JA047 M 5.6 OHM,J, 1/3W Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R16466 D0GF473JA048 M 47KOHM,J,1/3W...
  • Page 59 M 1KOHM,J, 1/3W R16678 D0GF102JA047 M 1KOHM,J, 1/3W R16683 D0GD100JA059 M 10 OHM,J,1/4W R16684 D0GD100JA059 M 10 OHM,J,1/4W Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R16685 D1BD1500A066 M 150 OHM,F.1/8 W...
  • Page 60 1 PAVCA R17289 D1H84704A041 NETWORK RESISTER 1 PAVCA R17292 D0GB470JA065 M 47 OHM,J,1/10W R17295 D1H86814A041 NETWORK RESISTER 1 PAVCA Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks R17301 D0GD224JA052 M 220KOHM,J,1/8W R17304...
  • Page 61 CONTROL 10KOHMB X8300 H0J270500166 CRYSTAL 1 PAVCA X9300 H0J200500091 CRYSTAL ZA100 K4AD01A00002 TERMINAL ZA101 K4AD01A00002 TERMINAL Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks ZA600 K4AD01A00002 TERMINAL ZA601 K4AD01A00002 TERMINAL ZA602...
  • Page 62 1 PAVCA XTV3+8GFJK SCREW XYN3+F6FJ SCREW(C:13) XYN3+F6FJ SCREW(P:5 SS:5 SC:7 SUSD:3 SS2:2) XYN3+J10FJ SCREW XYN3+J10FJ SCREW XYN3+J10FJ SCREW Model No. : TC-P55ST60 Parts List Ref. Change Safety Part No. Part Name & Description Q'ty Remarks XYN3+J10FJ SCREW XYN3+J10FJ SCREW XYN3+J10FJ...

Table of Contents