Table of Contents
Advertisement
FORM NO. 3317–998GB
Wheel Horse
267HE
Lawn & Garden
Tractor
Model No. 72104 – 6900001 & Up
Operator's Manual
IMPORTANT: Read this manual carefully. It contains information about your
safety and the safety of others. Also become familiar with the controls and
their proper use before you operate the product.
Advertisement
Table of Contents
Related Manuals for Toro 72104
Summary of Contents for Toro 72104
- Page 1 Wheel Horse 267HE Lawn & Garden Tractor Model No. 72104 – 6900001 & Up Operator’s Manual IMPORTANT: Read this manual carefully. It contains information about your safety and the safety of others. Also become familiar with the controls and their proper use before you operate the product.
- Page 2 Read this manual carefully to learn how to operate and maintain your product correctly. Reading this All of us at Toro want you to be completely satisfied manual will help you and others avoid personal injury with your new product, so feel free to contact your and damage to the product.
-
Page 3: Table Of Contents
Contents Page Page Positioning the Seat ....Safety ....... . . Headlights . -
Page 4: Safety
Safety Safe Operation Practices for Preparation Ride-on (riding) Rotary While mowing, always wear substantial footwear and long trousers. Do not operate the Lawnmower Machines equipment when barefoot or wearing open sandals. Training Thoroughly inspect the area where the equipment is to be used and remove all objects Read the instructions carefully. - Page 5 Safety Operation Watch out for traffic when crossing or near roadways. Do not operate the engine in a confined space Stop the blades rotating before crossing surfaces where dangerous carbon monoxide fumes can other than grass. collect. When using any attachments, never direct Mow only in daylight or in good artificial light.
-
Page 6: Vibration Level
Safety Sound Pressure Level 15. Stop the engine and disengage drive to attachment This unit has an equivalent continuous A-weighted before refuelling; sound pressure at the operator ear of: 100 dB(A), based on measurements of identical machines per before removing the grass catcher; ANSI B71.5-1984 procedures. -
Page 7: Slope Chart
Safety Slope Chart Read all safety instructions on pages 2–9. -
Page 9: Symbols Glossary
Safety Symbols Glossary Safety alert symbol Dismemberment–Mower in rearward motion Safety alert symbol Stay a safe distance from the machine Read operator’s manual Stay a safe distance Consult Technical Manual for from the mower proper service procedures Keep children a safe distance Thrown or flying objects–... - Page 10 Safety Symbols Glossary Cutting element– Riding on this machine is allowed basic symbol only on a passenger seat & only if the driver’s view is not hindered Cutting element– height adjustment Crushing of fingers or hands–Force applied Cutting unit–lower from side Cutting unit-raised Kickback or upward motion–Stored energy...
- Page 11 Safety Symbols Glossary Fuel Fast Slow Fuel level Decreasing/Increasing Volume empty On/Run Volume full Off/Stop Engine Battery charging conditin Engine start Head lights– Main/high beam Engine stop Brake system Choke Parking brake Clutch Engine temperature PTO (Power Take Off) Engine lubricating Engage oil pressure Disengage...
-
Page 12: Gasoline And Oil
Gasoline and Oil Recommended Gasoline Stabilizer/Conditioner Use UNLEADED Regular Gasoline suitable for Add the correct amount of gas stabilizer/conditioner automotive use (85 pump octane minimum). Leaded to the gas. Using a stabilizer/conditioner in the regular gasoline may be used if unleaded regular is machine: not available. -
Page 13: Operation
Operation Think Safety First Parking Brake Please carefully read all the safety instructions and Always set the parking brake when you stop the symbols in the safety section. Knowing this machine or leave it unattended. information could help you, your family, pets or While the ignition key is in the “RUN”... -
Page 14: Starting And Stopping The Engine
Operation Starting and Stopping the Engine Starting Sit down on the seat. Set the parking brake; refer to Setting the Parking Brake, page 11. 1207 1206 Figure 3 Figure 4 Note: The engine will not start unless you set the parking brake or fully depress the 1. -
Page 15: Operating The Power Take Off (Pto)
Operation Operating the The Safety Interlock System Power Take Off (PTO) Understanding the Safety Interlock System The power take off (PTO) engages and disengages power to the electric clutch. The safety interlock system is designed to prevent the engine from starting unless: While the ignition key is in “RUN”... -
Page 16: Indicator Control Module
Operation Indicator Control Module The oil light will be “ON” when the key is in the The indicator control module (optional on some “RUN” or “LIGHTS” positions and the engine is not models) (Fig. 7) lights when the parking brake or running, after the engine is started the light should go power take off (PTO), is actuated and when there is a out. -
Page 17: Driving Forward Or Backward
Operation Driving Forward or Backward Stopping the Machine The throttle control regulates the engine speed as To stop the machine, release the traction control measured in rpm (revolutions per minute). Place the pedal, disengage the power take off (PTO), and turn throttle control in the “FAST”... -
Page 18: Attachment Lift Lever
Operation Attachment Lift Lever Adjusting Dial-A-Height The attachment lift lever (Fig. 9) is used to raise and The Dial-A-Height control (Fig. 9) is used to limit the lower various attachments. downward travel of the attachment. The Dial-A-Height knob is rotated to change the location of this stop, up or down. -
Page 19: Positioning The Seat
Operation Positioning the Seat Positioning the Tilt Steering Wheel The seat can move forward and backward. Position the seat where you have the best control of the The steering wheel has four tilt locations. Position the machine and are most comfortable. steering wheel where you have the best control of the machine and are most comfortable. -
Page 20: Using The Cruise Control
Operation Using the Cruise Control Pushing the Machine by Hand The cruise control is optional on some models. A 3 IMPORTANT: Always push the machine by position: Lock-Set (spring loaded), On and hand. Never tow the machine because Off-Unlock dash switch (Fig. 13) controls the transaxle damage may occur. -
Page 21: Maintenance
Maintenance Service Interval Chart Each Storage Spring Service Operation Hours Hours Hours Hours Service Service Oil—check level Oil—change* Initial Oil Filter—change* (200 hours, every other oil change or yearly) Safety System—check Brake—check 200 hours Chassis—grease* Foam Air Cleaner—service* Paper Air Cleaner—replace* Spark Plug(s)—check Belts—check for wear/cracks Gasoline—drain... -
Page 22: Air Cleaner
Maintenance Air Cleaner Carefully slide the foam element off the paper element (Fig. 15). Service Interval/Specification Unscrew the cover nut and remove the cover and paper element (Fig. 15). Foam Element: Clean and re-oil after every 25 operating hours, or yearly, whichever occurs first. Cleaning the Foam and Paper Elements Paper Element: Replace after every 100 operating hours or yearly, whichever occurs first. - Page 23 Maintenance Installing the Foam and Paper Elements Paper Element A. Lightly tap the element on a flat surface to IMPORTANT: To prevent engine damage, remove dust and dirt (Fig. 17). always operate the engine with the complete foam and paper air cleaner assembly B.
-
Page 24: Engine Oil
Maintenance Engine Oil Checking Oil Level Park the machine on a level surface, disengage Service Interval/Specification the power take off (PTO), set the parking brake, and turn the ignition key to “OFF” to stop the Change oil: engine. Remove the key. After the first 5 operating hours. - Page 25 Maintenance Changing/Draining Oil Change Oil Filter Service Interval/Specification Start the engine and let it run five minutes. This warms the oil so it drains better. Replace the oil filter every 200 hours or every other Park the machine so that the drain side is slightly oil change.
-
Page 26: Spark Plug
Maintenance Spark Plug Checking the Spark Plug Look at the center of the spark plug(s) (Fig. 22). Service Interval/Specification If you see light brown or gray on the insulator, the engine is operating properly. A black coating Check the spark plug(s) after every 200 operating on the insulator usually means the air cleaner is hours. -
Page 27: Greasing And Lubrication
Maintenance Greasing and Lubrication Lubricate the traction control pedal on hydrostatic models (or brake and clutch pedals on gear drive models) where they pivot on Service Interval/Specification mounting shaft (Fig. 24). Grease the machine after every 50 operating hours or yearly, whichever occurs first. -
Page 28: Brake
Maintenance Brake Adjusting the Brake The brake lever is on top of the transaxle (Fig. 26). If Always set the parking brake when you stop the the parking brake does not hold securely, an machine or leave it unattended. If the parking brake adjustment is required. -
Page 29: Fuel Tank
Maintenance Fuel Tank Pull the fuel line off the filter (Fig. 28). Open fuel shut-off valve and allow gasoline to drain into a gas can or drain pan. Draining The Fuel Tank Note: Now is the best time to install a new fuel filter because the fuel tank is empty. -
Page 30: Fuel Filter
Maintenance Fuel Filter Service Interval/Specification Replace the fuel filter after every 100 operating hours or yearly, whichever occurs first. Replacing the Fuel Filter Never install a dirty filter if it is removed from the fuel line. Disengage the power take off (PTO), set the parking brake, and turn the ignition key to “OFF”... -
Page 31: Front Wheel Toe-In
Maintenance Front Wheel Toe-In Adjusting Toe-In Check the toe-in before you adjust it; refer to Service Interval/Specification Measuring Toe-In, Page 29. Maintain toe-in of the front wheels as specified. If Remove ball joint from one steering lever uneven tire wear, lawn scuffing or hard steering (Fig. -
Page 32: Transaxle Fluid
Maintenance Transaxle Fluid Fuse Service Interval/Specification Service Interval/Specification Check fluid level after every 100 hours or yearly The electrical system is protected by fuses. It requires whichever comes first. Always keep the fluid level at no maintenance, however, if a fuse blows check the full level when the transaxle is cold. -
Page 33: Headlights
Maintenance Headlights Installing the Bulb The bulb has metal pins on the side of its base. Specification: Bulb # 1156 Automotive Type Align the pins with the slots in the bulb holder and insert the base into the holder (Fig. 34). Removing the Bulb Push and rotate the bulb clockwise until it stops. -
Page 34: Battery
Maintenance Battery Service Interval/Specification Check the electrolyte level in the battery before each use. Always keep the battery clean and fully charged. Use a paper towel to clean the battery case. If the battery terminals are corroded, clean them with a solution of four parts water and one part baking soda. - Page 35 Maintenance Adding Water to the Battery The best time to add distilled water to the battery is just before you operate the machine. This lets the water mix thoroughly with the electrolyte solution. Clean the top of the battery with a paper towel. Lift off the filler caps (Fig.
- Page 36 Maintenance Charging the Battery IMPORTANT: Always keep the battery fully charged (1.260 specific gravity). This is especially important to prevent battery damage when the temperature is below 32 F (0 C). Remove the battery from the chassis; refer to Removing the Battery, page 32. Check the electrolyte level;...
-
Page 37: Wiring Diagram
Maintenance Wiring Diagram 4-LIGHT MODULE 2329... -
Page 38: Cleaning And Storage
Maintenance Cleaning and Storage 40 F (4 C). If the temperatures will be above 40 F (4 C), check the water level in the battery and charge it every 30 days. Disengage the power take off (PTO), set the parking brake, and turn the ignition key to Check the tire pressure;... -
Page 39: Troubleshooting
Troubleshooting PROBLEM POSSIBLE CAUSES CORRECTIVE ACTION Starter does not crank Blade control (PTO) is Move blade control (PTO) to ENGAGED. DISENGAGED. Parking brake is not on. Set parking brake. Operator is not seated. Sit on the seat. Battery is dead. Charge the battery. - Page 40 Troubleshooting PROBLEM POSSIBLE CAUSES CORRECTIVE ACTION Engine overheats. Engine load is excessive. Reduce ground speed. Oil level in crankcase is low. Add oil to crankcase. Cooling fins and air passages Remove obstruction from under engine blower housing cooling fins and air passages. are plugged.