Table of Contents
Advertisement
Quick Links
24in Cordless Hedge Trimmer
Model No. 51022—Serial No. 314000001 and Up
Model No. 51022T—Serial No. 314000001 and Up
Model 51022T does not include a battery or a charger.
This product is intended for trimming hedges and bushes on residential properties.
General Power Tool
Safety Warnings
WARNING Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
electric shock, fire, and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in all of the warnings listed below refers
to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1. Work area safety
A. Keep work area clean and well lit. Cluttered or dark
areas invite accidents
B. Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
C. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose
control.
2. Electrical safety
A. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk
of electric shock.
B. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
C. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
D. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges or
moving parts. Damaged or entangled cords increase
the risk of electric shock.
E. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
F. If operating a power tool in a damp location is
unavoidable, use a supply protected by a residual
© 2013—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
current device (RCD) in AUS or a ground fault
interrupt (GFI) in the USA. Use of an RCD or GFI
reduces the risk of electric shock.
3. Personal safety
A. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result
in serious personal injury.
B. Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
C. Prevent unintentional starting. Ensure the switch
is in the off-position before connecting to power
source and/or battery pack, picking up or carrying
the tool. Carrying power tools with your finger on the
switch or energising power tools that have the switch
on invites accidents.
D. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to
a rotating part of the power tool may result in personal
injury.
E. Do not overreach. Keep proper footing and balance
at all times. This enables better control of the power
tool in unexpected situations.
F. Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewelry, or long hair
can be caught in moving parts.
G. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust-related hazards.
4. Power tool use and care
A. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will
do the job better and safer at the rate for which it was
designed.
B. Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
C. Disconnect the plug from the power source and/or
the battery pack from the power tool before making
any adjustments, changing accessories, or storing
power tools. Such preventive safety measures reduce
the risk of starting the power tool accidentally.
Original Instructions (EN)
All Rights Reserved *3379-460* A
Printed in the USA.
Form No. 3379-460 Rev A
Operator's Manual
Advertisement
Table of Contents
Related Manuals for Toro 51022
Summary of Contents for Toro 51022
-
Page 1: General Power Tool Safety Warnings
Form No. 3379-460 Rev A 24in Cordless Hedge Trimmer Model No. 51022—Serial No. 314000001 and Up Model No. 51022T—Serial No. 314000001 and Up Operator's Manual Model 51022T does not include a battery or a charger. This product is intended for trimming hedges and bushes on residential properties. -
Page 2: Sound Pressure
D. Store idle power tools out of the reach of children exposed metal parts of the power tool “live” and could give and do not allow persons unfamiliar with the power the operator an electric shock. tool or these instructions to operate the power tool. •... -
Page 3: Safety And Instructional Decals
Safety and Instructional Decals. Safety decals and instructions are easily visible to the operator and are located near any area of potential danger. Replace any decal that is damaged or lost. 121–7679 1. Read the Operator’s 3. Do not throw Lithium-Ion Manual. - Page 4 121–7687 1. Warning—read the 4. Warning—do not operate Operator’s Manual. in wet conditions. 2. Warning—stay away from 5. Do not dispose with other moving parts; keep guards household waste—recycle according to your local in shields in place. codes. 3. Thrown object hazard—wear eye protection.
- Page 5 Symbol Name Designation/Explanation Direct current Type of current Amperes Current Hertz Frequency (cycles per second) Strokes per minute Speed of blade Volts Voltage...
-
Page 6: Operation
Setup 2. Align the tongue of the battery pack with the cavity in the handle housing (Figure 3). Cut the zip-tie away from your body and remove it from the trigger handle (Figure 1). Figure 1 1. Zip-tie Figure 3 1. -
Page 7: Rotating The Hedge Trimmer Handle
Rotating the Hedge Trimmer Stopping the Hedge Trimmer Handle 1. Release either the trigger switch or the auxiliary handle trigger (Figure 3). 1. Press and hold the rotational lock button. 2. Allow at least 5 seconds for the cutting blade to stop moving. Charging the Battery Pack Important: For best results, your battery tool should be charged in a location where the temperature is more than 5°... - Page 8 Figure 6 1. LED indicators (level of 3. Battery terminal charge) 2. Release button 4. Test button 3. Slide the battery into the charger until it clicks into place. 4. To remove the battery, hold down the charger, pull up on the release button, and slide the battery backwards out of the charger.
-
Page 9: Maintenance
Service Should this item need service, take the product to your Authorized Toro Service Dealer. Your Toro Dealer is specially trained to repair Toro products and will ensure that your Toro stays “All” Toro. Storage •... - Page 10 Notes:...
- Page 11 The Way Toro Uses Information Toro may use your personal information to process warranty claims, to contact you in the event of a product recall and for any other purpose which we tell you about. Toro may share your information with Toro's affiliates, dealers or other business partners in connection with any of these activities. We will not sell your personal information to any other company.
- Page 12 The Toro Company and its affiliate, Toro Warranty Company, pursuant to an agreement between them, jointly warrant this product for two years against defects in material or workmanship when used for normal residential purposes.* If you think your Toro Product contains a defect in materials or workmanship, if you have questions or problems, and before returning this product call toll free:...