Setup
Cut the zip-tie away from your body and remove it from the trigger
handle (Figure 1).
1. Zip-tie
Operation
Important: The battery pack is not fully charged when it is
purchased. Before using the hedge trimmer for the first
time, place the battery pack in the charger and charge it until
the LED indicators turn green. Make sure to read all safety
precautions. With regular use, it will need shorter charging
time. If storing for a prolonged period of time, remove the
battery. When ready to use again, charge the battery pack
until the LED indicators turn green.
Starting the Hedge Trimmer
1. Remove the protective cover from the cutter blades (Figure
2).
WARNING
The hedge trimmer blades can cause cuts or
amputation.
Be careful when handling the hedge trimmer with
the protective cover removed.
1. Protective cover
Figure 1
Figure 2
2. Align the tongue of the battery pack with the cavity in the
handle housing (Figure 3).
1. Auxiliary handle
2. Auxiliary handle trigger
3. Lock switch
4. Trigger
3. Grasp the trigger handle (Figure 3).
4. Push the battery pack into the handle until the latch locks
into place.
Important: The battery pack is not fully charged when it
is purchased. Before using the hedge trimmer for the
first time, place the battery pack in the charger charge
until the LED indicators turn green. Make sure to read all
safety precautions. With regular use, it will need shorter
charging time. If storing for a prolonged period of time,
remove the battery. When ready to use again, charge
the battery pack until the LED indicators turn green.
5. Place one hand on the trigger handle. Place the other hand
on the auxiliary handle and press the auxiliary handle trigger
(Figure 3).
6. Slide the lock switch backwards, towards you, then squeeze
the trigger switch to turn on the hedge trimmer (Figure 3).
Note: The trimmer will stay on as long as the trigger and the
auxiliary handle trigger are squeezed. The lock switch may
be released once hedge trimmer is running
6
Figure 3
5. Trigger handle
6. Tongue
7. Latch