Explanation Of Symbols - Husqvarna Rider 11 Operator's Manual
Hide thumbs
Also See for Rider 11:
- Workshop manual (77 pages) ,
- Operator's manual (56 pages) ,
- Operator's manual (47 pages)
Table of Contents
Advertisement
These symbols are on the machine and in the operator's manual.
N
R
Reverse
Neutral
Oil level
Cutting height
Use hearing protection
Clutch in
Noise emission to surround-
ings in accordance with the
directive of the European
Community. The machine's
emission is indicated in the
chapter TECHNICAL DATA
and on the decal.
Never use the machine if persons,
especially children, or animals,
are in the vicinity.
4
– English
EXPLANATION OF SYMBOLS
Study them carefully so that you know what they mean.
Read the operator's manual
Fast
Slow
Backwards
Clutch out
Warning! Rotating blades.
Warning! Risk that the
machine can tip over
Never carry passengers on
the machine or equipment.
Starting instructions
Read the instructions
Check the engine's oil level
Check the hydrostat's oil level
Lift up the cutting unit
Put the gear shift/hydrostat pedal in
neutral
Brake
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
Engine off
Battery
Forwards
Ignition
Parking brake
Brake
Never drive across
a slope
Keep hands and feet away
from under the hood when
the engine is running.
Choke
Fuel
Hydrostatic free wheel
Clutch
Warning
CE conformity marking
Drive very slowly
without the cutting unit.
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off
the ignition cable before repairs or
maintenance
- Quick Links:
- Changing the Oil
- Technical Data
Hide quick links:
Advertisement
Table of Contents
