Page 1
Condenser Sensor Dryer DCU 8230 DCSC 821 W DCUR 801 W DCUR 801 S...
Page 2
Dear Customer, Thank you for prefering a Beko product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference.
TABLE OF CONTENTS 1 Important safety and environmental 6 Selecting a Programme and Operating instructions Your Machine 1.1 General safety ..........4 6.1 Control panel ..........19 1.1.1 Electrical safety ........5 6.2 Preparation of the dryer ......20 1.1.2 Product safety ........6 6.3 Programme selection ......20 1.2 Mounting over a washing machine .....8 6.4 Main programmes ........20 1.3 Intended use ..........9...
Important safety and environmental instructions This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.1 General safety • The dryer can be used by children at and above 8 years old and by persons whose physical, sensory or mental capabilities were not fully developed or who lack experience and knowledge provided that they are supervised or trained on the safe usage of the product and the risks...
Important safety and environmental instructions 1.1.1 Electrical safety Electrical safety instructions should be followed while electrical connection is made during the installation. • Connect the dryer to a grounded outlet protected by a fuse at the value specified on the type label. (See 2.1 Overview) Have the grounding installation performed by a qualified electrician.
Important safety and environmental instructions 1.1.2 Product safety Points to be taken into consideration for fire hazard: Below specified laundry or items must not be dried in the dryer considering fire hazard. • Unwashed laundry items • Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin or paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.
Page 7
Important safety and environmental instructions • You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect. Underwear that contains metal reinforcements should not be dried in the dryer.
Important safety and environmental instructions 1.2 Mounting over a washing machine • A fixing device should be used between the two machines when installing the dryer above a washing machine. The fitting device can be obtained through spare part suppliers. • Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx.
Important safety and environmental instructions 1.3 Intended use • Dryer has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use. • Use the dryer only for drying laundry that are marked accordingly. • The manufacturer waives any responsibility arisen from incorrect usage or transportation.
Take them to the packaging material collection points designated by the local authorities. Please visit the following website to get more information on the product. www.beko.com Dryer / User Manual 10 /32 EN...
Important safety and environmental instructions 1.8 Technical Specifications Height (Min. / Max.) 84,6 cm / 86,6 cm* Width 59,5 cm Depth 59,8 cm Capacity (max.) 8 kg** Weight (net) 38 kg Voltage Rated power input See rating label*** Model code * Min.
Your dryer 2.2 Package Contents 1. Water drain hose * 2. Filter drawer spare sponge* 3. User Manual 4. Drying basket* 5. Drying basket user manual* *It can be supplied with your machine depending on its model. Dryer / User Manual 13 / 32 EN...
Installation 3.2 Removing the transportation Before the calling the nearest Authorised Service for the safety assembly installation of the dryer, ensure that electrical installation and water drain is appropriate referring to the user's Remove the transportation safety manual. (See 3.3 Connecting to the drain and 3.5 assembly before using the dryer for the Electrical connection) If they are not suitable, contact first time.
Installation 3.4 Adjusting the feet Connecting the water drain hose 1-2 Pull hose at the behind of the dryer by hand in order In order to ensure that the dryer operates more silently to disconnect it from where it is connected. Do not and vibration-free, it must stand level and balanced on use any tools to remove the hose.
Electrical Connection Make sure that you have an earthed power outlet socket rated at 13 amps (minimum). Important 4.1 Attention! When installed, the socket must be reachable after installation, or a separate switch (which can disconnect 4.3 Fitting a different plug the two poles) must be used in the installation.
Preparation 5.1 Laundry suitable for drying in the dryer • Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme. LAUNDRY DRYING SYMBOLS Drying Suitable for...
Preparation 5.5 Correct load capacity Following weights are given as examples. Follow the instructions in the “Programme selection and Approximate weights Laundry consumption table”. Do not load more than the capacity (g)* values stated in the table. Cotton quit covers (double) 1500 Cotton quit covers (single) 1000...
Selecting a Programme and Operating Your Machine 6.1 Control panel 1. Filter cleaning warning light 5. Programme selection knob Warning light turns on when the filter is full. Used to select a programme. 2. Programme follow-up indicator 6. Start/Pause/Cancel button Used to follow-up the progress of the current Used to start, pause or cancel the programme.
Selecting a Programme and Operating Your Machine 6.2 Preparation of the dryer Normal laundry (E.g.: tablecloths, • Plug in the dryer. underwear) are dried in a way • Open the loading door. that they do not require ironing Normal dry • Place the laundry in the machine without before placing in the drawers, but compressing.
Page 21
Selecting a Programme and Operating Your Machine In order to obtain better results from the dryer programmes, your laundry must be washed with suitable programme and spun at the recommended spin speeds in your washing machine. • Shirts Dries the shirts in a more sensitive way so that they are less creased and ironed easily.
Selecting a Programme and Operating Your Machine 6.6 Programme selection and consumption table Approximate Spin speed in washing Drying time Programmes Capacity (kg) amount of machine (rpm) (minutes) remaining humidity Cottons / Coloreds Cupboard dry 1000 % 60 Normal dry 1000 % 60 Iron dry...
Selecting a Programme and Operating Your Machine 6.7 Auxiliary function • Delayed operation of the selected programme is Cancel audio warning started by pressing the “Start/Pause/Cancel” button Your dryer will give an audio warning when the after selecting the time delay. programme comes to an end.
Selecting a Programme and Operating Your Machine 6.13 Changing the programme after it Any laundry added after the drying process has started has started may cause the dried clothes in You can use this feature to dry your clothes under higher the machine intermingle with wet clothes or lower temperatures after your dryer has started.
Selecting a Programme and Operating Your Machine 6.16 End of programme Press the relevant buttons for 3 seconds The “End/Anti-creasing”, “Filter cleaning” and “Water to activate the child-proof lock. A long tank” warning lights on the programme follow up beep will be heard and the child-proof lock indicator will turn on when the programme comes to an will be activated.
Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals. 7.1 Cleaning Lint Filter / Loading Door Inner Surface Lint and fibre released from the laundry to the air during the drying cycle are collected in the Lint Filter.
Maintenance and cleaning 7.2 Cleaning the sensor 7.3 Draining the water tank There are dampness sensors in the dryer that detect Dampness of the laundry is removed and condensed whether the laundry is dry or not. during drying process and the water that arise To clean the sensors: accumulates in the water tank.
Maintenance and cleaning 7.4 For the condenser 4. Clean the condenser by applying pressurized water with a shower head and wait until the water drains. Hot and humid air in the condenser is cooled with the cold air from the room. Thus, the humid air circulating in your dryer is condensed and then pumped into the tank.
Suggested solutions for problems Drying process takes too much time • Meshes of the filter may be clogged. Wash with water Laundry comes out wet at the end of drying. • Meshes of the filter may be clogged. Wash with water. • Excessive laundry might have been loaded in. Do not load the dryer in excess. Dryer does not switch on or the programme does not start. Dryer is not activated when set. • It might have not been plugged in. Make sure that the machine is plugged in.
Guarantee 9.3 Important notes Your new product is guaranteed against the cost of breakdown repairs for twelve months from the date of • Your product is designed and built for domestic the original purchase. household use only. 9.1 What is covered? • The guarantee will be void if the product is installed or used in commercial or non-residential domestic • Repairs necessary as a result of faulty materials, household premises.
Service Service once the manufacturers Please keep your purchase receipt or other proof of guarantee has expired. purchase in a safe place; you will need to have it should the product require attention under guarantee. If you have purchased an extended guarantee please You should also complete the details below;...