Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Panasonic TH-32LR11UK
Summary of Contents for Panasonic TH-32LR11UK
-
Page 1: Operating Instructions
Operating Instructions High Defi nition Hospitality LCD Display TH-32LR11UK Model No. TH-32LR11UH The illustration shown is an image. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. English... - Page 2 WARNING: To reduce the risk of electric shock, do not remove cover or back. No user-serviceable parts inside. Refer servicing to qualifi ed service personnel. The lightning flash with arrow-head within a triangle is in tended to tell the user that parts inside the product are a risk of electric shock to per sons.
-
Page 3: Important Safety Instructions
Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifi... -
Page 4: Table Of Contents
Dear Panasonic Customer Welcome to the Panasonic family of customers. We hope that you will have many years of enjoyment from your new LCD Display. To obtain maximum benefit from your set, please read these Instructions before making any adjustments, and retain them for future reference. -
Page 5: Fcc Statement
To assure continued compliance, follow the attached installation instructions and use only shielded interface cables when connecting to computer or peripheral devices. Any changes or modifi cations not expressly approved by Panasonic Corp. of North America could void the user's authority to operate this device. Responsible Party:... -
Page 6: Safety Precautions
Disconnect the power plug from the wall outlet as a safety precaution before carrying out any cleaning. • Electric shocks can result if this is not done. (All of the following accessories are manufactured by Panasonic Corporation.) Clean the power cable regularly to prevent it from becoming dusty. -
Page 7: Maintenance
WARNING Setup Do not place the Display on sloped or unstable surfaces. • The Display may fall off or tip over. Do not place any objects on top of the Display. • If water spills onto the Display or foreign objects get inside it, a short-circuit may occur which could result in fi... -
Page 8: Accessories
Accessories Accessories Supplied Check that you have the Accessories and items shown Operating Instruction book The remote control is not included with this set. Available for purchase separately. Object model : N2QAYB000178 Location Place the display at a comfortable distance for viewing. Avoid placing it where sunlight or other bright light (including refl... -
Page 9: Preparation For Wall-Hanging
WARNING • Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer. Any damage resulting from not having a professional installer mount will void your unit’s warranty. •... -
Page 10: Pc Input Terminals Connection
Connections PC Input Terminals connection COMPUTER Notes: • Computer signals which can be input are those with a horizontal scanning frequency of 15 to 110 kHz and vertical scanning frequency of 48 to 120 Hz. (However, the image will not be displayed properly if the signals exceed 1,200 lines.) •... -
Page 11: Serial Terminals Connection
Slot3 input PC input SL1A Slot1 input (INPUT1A) SL1B Slot1 input (INPUT1B) SL2A Slot2 input (INPUT2A) SL2B Slot2 input (INPUT2B) None Screen mode select (toggle) ZOOM ZOOM FULL FULL JUST JUST NORM SELF Panasonic Auto SJST JUST SNOM SFUL H-FILL... -
Page 12: Power On / Off
Power ON / OFF Connecting the plug to the Wall Outlet. Press the Power switch on the Display to turn the set on: Power-On. Power Indicator: Green Press the button on the remote control to turn the Display off. Power Indicator: Red (standby) Press the button on the remote control to turn the Display on. -
Page 13: Initial Selections
Initial selections Selecting the input signal Select the input signals to be connected by installing the optional Terminal Boards. Press to select the input signal to be played back from the equipment which has been connected to the Display. Input signals will change as follows: INPUT1 Notes: •... -
Page 14: Basic Controls
Basic Controls Main Power On / Off Switch INPUT button (INPUT1, INPUT2, INPUT3 and PC selection) (see page 13) MENU Screen ON / OFF This button is locked by initial setting. Each time the MENU button is pressed, the menu screen will switch. (see page 20) Normal Viewing PICTURE SOUND... -
Page 15: Remote Control Transmitter
Remote Control Transmitter The remote control is not included with this set. Available for purchase separately. Object model : N2QAYB000178 ACTION button Press to make selections. ASPECT button Press to adjust the aspect. (see page 16) POWER button The Display must fi rst be plugged into the wall outlet and turned on at the power switch (see page 12). -
Page 16: Aspect Controls
For VIDEO (S VIDEO) signal input: Zoom1 Zoom2 Notes: • When selecting an input slot that attaches BNC Dual Video Terminal Board (TY-FB9BD), Panasonic Auto cannot be selected. • In All Aspect mode, “Panasonic AUTO” is displayed as “Panasonic Auto”. ZOOM... -
Page 17: Multi Pip
For PC signal input: Zoom 16:9 For SD signal input (525 (480) / 60i • 60p, 625 (575) / 50i • 50p): Zoom1 Zoom2 For HD signal input [1125 (1080) / 60i • 50i • 60p • 50p • 24p • 25p • 30p • 24sF, 1250 (1080) / 50i, 750 (720) / 60p • 50p]: 4:3 Full Zoom1 Zoom2... -
Page 18: Advanced Pip
MULTI PIP Advanced PIP Set “Advanced PIP” to “On” in Options menu. (see page 35) Press repeatedly. Each time pressing this button main picture and sub picture will be displayed as follows. One screen Notes: • To use , buttons for the screen operations, follow the procedures in the previous page. •... -
Page 19: Digital Zoom
Digital Zoom This displays an enlargement of the designated part of the displayed image. Display the operation guide. Press to access Digital Zoom. The operation guide will be displayed. During Digital Zoom, only the following buttons can be operated. [Remote control] Select the area of the image to be enlarged. -
Page 20: On-Screen Menu Displays
+/▲ ENTER/ Press several times. SIGNAL 3D Y/C FILTER (NTSC) COLOR SYSTEM 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) NOISE REDUCTION (see page 30-33) ENGLISH ( US ) BRIGHT SET UP TIMER PRESENT TIME OF DAY 99:99 POWER ON FUNCTION... -
Page 21: Adjusting Pos. /Size
POS. /SIZE function. • If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode, the adjustment is not memorized. When exiting the mode, the screen will return to a former adjustment. -
Page 22: Picture Adjustments
PICTURE Adjustments Press to display the PICTURE menu. Select to adjust each item. Press to select the menu to adjust. Select the desired level by looking at the picture behind the menu. Note: Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting. -
Page 23: Advanced Settings
Item Effect BACKLIGHT Darker Brighter PICTURE Less More BRIGHTNESS Darker Brighter COLOR Less More TINT Reddish Greenish SHARPNESS Less More ADVANCED SETTINGS Item Effect BLACK EXTENSION Less More INPUT LEVEL Less More GAMMA Down Notes: • The adjustment values are memorized separately for each input terminal. •... -
Page 24: Sound Adjustment
SOUND Adjustment Press to display the SOUND menu. Select to adjust each item. Press to select the menu to adjust. Select the desired level by listening to the sound. Press to exit from adjust mode. Item STANDARD: Emits the original sound. AUDIO MENU DYNAMIC: CLEAR:... -
Page 25: Present Time Setup / Set Up Timer
PRESENT TIME SETUP / SET UP TIMER The timer can switch the Display ON or OFF. Before attempting Timer Set, confi rm the PRESENT TIME OF DAY and adjust if necessary. Then set POWER ON TIME / POWER OFF TIME. Press to display the SET UP menu. -
Page 26: Side Bar Adjust
SIDE BAR ADJUST Do not display a picture in 4:3 mode for an extended period, as this can cause an image retention to remain on the side bars on either side of the display fi eld. To reduce the risk of such an image retention, illuminate the side bars. -
Page 27: Reduces Power Consumption
Reduces power consumption • POWER SAVE: When this function is turned ON, luminous level of the LCD Display is suppressed, so power consumption is reduced. • STANDBY SAVE: When this function is turned ON, power consumption of the microcomputer is reduced during power supply standby (see page 12, 14, 15), so standby power of the set is reduced. -
Page 28: Customizing The Input Labels
Customizing the Input labels This function can change the label of the Input signal to be displayed. Select the input signal which you would like to change its label before customizing the Input labels. (see page 13, 15) Press to select INPUT LABEL. Press to change the INPUT LABEL. -
Page 29: Set Up For Input Signals
SET UP for Input Signals COMPONENT / RGB IN SELECT Select to match the signals from the source connected to the COMPONENT / RGB input terminals. Y, P signals “COMPONENT” RGB signals “RGB” Press to display the SET UP menu. Press to select the “COMPONENT / RGB-IN SELECT”. -
Page 30: Signal Menu
When ON, this setting only affects NTSC input signals. For VIDEO (S VIDEO) SIGNAL 3D Y/C FILTER (NTSC) COLOR SYSTEM 3 : 2 PULLDOWN Panasonic AUTO (4 : 3) NOISE REDUCTION For COMPONENT SIGNAL 3 : 2 PULLDOWN XGA MODE NOISE REDUCTION H-FREQ. -
Page 31: Color System / Panasonic Auto
To display M.NTSC signal, select “M.NTSC” in COLOR SYSTEM. Panasonic AUTO Set to “4:3” to view 4:3 images in an unchanged format when Panasonic AUTO is selected. (4 : 3 ) If you would like to view 4:3 images in Just format, set to “JUST”. -
Page 32: Noise Reduction
SET UP for Input Signals NOISE REDUCTION Sets the following three NR (Noise Reduction) functions together. VIDEO NR, MOSQUITO NR, BLOCK NR Press to select “NOISE REDUCTION”. Press to select “OFF”, “MIN”, “MID”, “MAX”, “ADVANCED”. Advanced NR Sets the three NR functions separately. Press to select “ADVANCED”. -
Page 33: Sync
SYNC Select SIGNAL from the “SET UP” menu during RGB input signal. Press to select the “SYNC”. Press to adjust. Setting RGB sync signal Confi rm that the input is set to RGB INPUT (this setting is valid only for RGB INPUT signal). -
Page 34: Options Adjustments
Options Adjustments Press to display the SET UP menu. Press to select “OSD LANGUAGE”. Press and hold until the Options menu is displayed. Press to select your preferred menu. Press to adjust the menu. Press to exit from Options menu. Item Weekly Command Timer Sets Weekly Command Timer. - Page 35 Item Locks the input switch operation. Notes: • Only the adjusted signal is displayed (see page 13). • Signal can be displayed when the Terminal board is installed. INPUT lock • Input switch can be used when this is set to “Off”. •...
- Page 36 Options Adjustments Item You can set the power-on delay time of the displays to reduce the power load, when you press POWER switch to turn on the multiple displays that are set together. Set each display’s setting individually. Off: 1 to 30 (sec.): Set the power-on delay time (second). Power On Screen Notes: Delay...
-
Page 37: Weekly Command Timer
Weekly Command Timer You can set 7-day timer programming by setting time and command. Note: Before setting Weekly Command Timer, set PRESENT TIME SETUP. (see page 25) Press to select Function. Press to select “On”. Note: • When Function is set to On, SET UP TIMER (see page 25) is unavailable. -
Page 38: Shipping Condition
Options Adjustments Press to select Command No. Press to select a command number. Press to select Time / Command. Press to set each item. Time: Set the time to execute a command program. Pressing “ minute. Pressing “ Command:Select a command to execute at the set time. This unit has 58 commands to set. (see page 41) Notes: •... -
Page 39: Troubleshooting
Troubleshooting Before you call for service, determine the symptoms and make a few simple checks as shown below. Symptoms Picture Sound Interference Noisy Sound Normal Picture No Sound No Picture No Sound No Picture Normal Sound No Color Normal Sound No remote control operations can be performed. -
Page 40: List Of Aspect Modes
List of Aspect Modes Aspect mode All Aspect: Factory setting Picture All Aspect: Off 16:9 FULL 14:9 – Just JUST Just1 Just2 JUST 4:3 (1) 4:3 (2) 4:3 Full H-FILL Zoom ZOOM Zoom1 Zoom2 ZOOM Zoom3 – Enlarged screen The display of the pictures fi lls the screen. In the case of SD signals, pictures with a 4:3 aspect ratio are enlarged horizontally, and displayed. -
Page 41: Pc Input Signals
PC input signals Applicable input signals for Mini D-sub 15P (Component) / Mini D-sub 15P (RGB) (* Mark) Signal name 525 (480) / 60i 525 (480) / 60p 625 (575) / 50i 625 (575) / 50p 750 (720) / 60p 750 (720) / 50p 1,125 (1,080) / 60p 1,125 (1,080) / 60i... -
Page 42: Command List Of Weekly Command Timer
Audio Volume (60) DAM:FULL Aspect (FULL) DAM:JUST Aspect (JUST) DAM:NORM Aspect (4:3) DAM:SELF Aspect (Panasonic Auto) DAM:ZOOM Aspect (ZOOM) DWA:OFF Dual Picture mode (OFF) DWA:OVL1 Advanced PIP mode (1) (see page 18) DWA:OVL2 Advanced PIP mode (2) (see page 18) -
Page 43: Specifi Cations
Speaker Audio Output Note: Design and specifi cations are subject to change without notice. Mass and dimensions shown are approximate. TH-32LR11UK, TH-32LR11UH 110 - 127 V AC, 50/60 Hz 160 W Save OFF 1.1 W, Save ON 0.4 W 0.1 W 16:9 27.5”... - Page 44 Executive Offi ce : One Panasonic Way 1F-10, Secaucus, NJ 07094 EASTERN ZONE : One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 348-7621 Mid-Atlantic/New England : One Panasonic Way 4E-7 Secaucus, NJ 07094 (201) 348-7621 Southeast Region : 1225 Northbrook Parkway, Ste 1-160 Suwanee GA 30024 (770)338-6835 Central Region : 1707 N Randall Road E1-C-1, Elgin, IL 60123 (847)468-5200 WESTERN ZONE : 3330 Cahuenga Blvd W., Los Angeles, CA 90068 (323) 436-3500...