Functional Settings; Start/Stop - ABB PST30 Installation And Commissioning Manual
Softstarters
Hide thumbs
Also See for PST30:
- Installation and maintenance manual (95 pages) ,
- Manual (10 pages) ,
- Quick start (2 pages)
Table of Contents
Advertisement
Chapter 7
Settings and configuration
Top level
Settings
Figure 25: Functional Settings menu
Settings
Functional Settings
Figure 26: Start/Stop group
92
7:2.4 Functional Settings
Application
The Functional setting menu consists of groups with
Settings
parameters arranged by function such as protection,
warning, fault, fieldbus communication etc. This menu should
Basic
be used if a more advanced set-up is required. For a detailed
Settings
description of each parameter, see Chapter 10 "Functions" .
Functional
Settings
Enter the Functional settings
Presentation
Settings
Enter the menu by selecting Functional Settings.
Service
Settings
All
Settings
Changed
Settings
Reset all
Settings
Operation
Mode
7:2.4.1 Start/Stop
To set parameters related to start and stop, enter the Start/
Stop group. Following parameters are available in this group:
Start/Stop
Torque control
Protections
Warnings
Faults
Inputs
Outputs
Analog Output
Fieldbus
Seq Start
Setting of parameters from Setting I
see "Basic Settings" .
• Setting I
e
• External By-Pass
• Start mode
• Stop mode
• Start ramp
• Stop ramp
• Initial voltage
• End voltage
• Step down voltage
• Current limit level
• Torque limit
• Kick start
• Kick level
• Kick time
• Start range
• Stop range
to Torque limit above,
e
1SFC132003M0201
- Quick Links:
- Faults
Hide quick links:
Advertisement
Chapters
Table of Contents
Troubleshooting
