Table of Contents
Advertisement
CONNECTIONS
Cautions :
1. Keep the DC POWER ON/OFF switch in the OFF posi-
tion until all connections have been properly made.
2. Connect the camera head and camera control unit.
Internal Sync Operation
1. Connect the camera cable between the camera head
and the camera control unit.
2. Connect the coaxial cable with BNC connectors
between the video output connector of the camera
control unit and the video monitor or VCR.
Video
Monitor
VIDEO
75
Coaxial
IN
Cable
S-VIDEO
75
VBS/HD
VD
OUT
ON
OFF
3. Connect the power cable between the DC 12 V input
terminals and the 12 V DC power supply unit (obtained
locally).
• The maximum cable length between camera control
unit and power supply unit is calculated as follows:
11.5 V DC < V
- (R x 0.42 x L) < 16 V DC
A
L : Cable length (meter)
R : Resistance of copper wire ( /meter)
V
: DC output voltage of power supply unit
A
L standard = V
- 12 / 0.42 x R (meter)
A
L minimum = V
- 16 / 0.42 x R (meter)
A
L maximum = V
- 11.5 / 0.42 x R (meter)
A
Cautions :
1. Connect to 12 V DC (11.5 V - 16 V) class 2 power
supply only.
2. To prevent fire or electric shock hazard, use a UL
listed wire VW-1, Style 1007 cable for 12 V DC
input terminals.
9
VCR or
Video Monitor
VIDEO
Hi-Z
75
Hi-Z
OUT
IN
OUT
CCU
DC 12V IN
RS-232C
1
VIDEO
2
RGB/SYNC
Gen-lock Operation
1. Connect the camera cable between the camera head
and the camera control unit.
2. Connect the coaxial cable with BNC connectors
between the video output connector of the camera
control unit and the video input connector of Special
Effects Generator (SEG), and between the VBS/HD
input connector of the camera control unit.
75
S-VIDEO
VBS/HD
VD
OUT
ON
OFF
VBS/HD In
75
S-VIDEO
VBS/HD
VD
OUT
ON
OFF
VBS/HD In
Black Burst
Out
Special Effects Generator
(SEG)
3. Connect the power cable between the DC 12 V input
terminals and the 12V DC power supply unit (obtained
locally).
Cautions :
1. Connect to 12 V DC (11.5 V - 16 V) class 2 power
supply only.
2. To prevent fire or electric shock hazard, use a UL
listed wire VW-1, Style 1007 cable for 12 V DC
input terminals.
CCU
DC 12V IN
RS-232C
1
VIDEO
2
RGB/SYNC
VIDEO Out
75 set to ON
CCU
DC 12V IN
RS-232C
1
VIDEO
2
RGB/SYNC
VIDEO Out
75 set to ON
VIDEO In
Advertisement
Table of Contents
