hit counter script

Connections - Panasonic Series Hi-Fi NV-HV61 Operating Instructions Manual

Nv-hv61 series video cassette recorder
Hide thumbs Also See for Series Hi-Fi NV-HV61:
Table of Contents

Advertisement

Setting the Remote Control to Operate
Your TV
You can operate the TVs of the manufacturers listed below
with the remote control after setting it.
This setting procedure allows you to operate the TVs of some
manufacturers using the supplied remote control.
Preparation
• Turn on the TV.
Operations
1 Find the manufacturer number of your TV while
referring to the following table.
2 While holding down [TV-ON/OFF] (17) on the remote
control, use [Numeric] (3) to enter the manufacturer
number. This completes the settings for the TV
manufacturer.
• Be sure to enter the number in two digits.
Example: 1 ) 01
3 To confirm the correct settings were made, check
whether the TV can be operated properly.
• When a manufacturer has multiple numbers in the
following table, try entering other numbers if the TV
operations cannot be performed properly, and then select
the optimal number.
Notes:
• If you are using a Panasonic TV, this setting has already
been made, and so you do not need to perform the above
setting procedure. However, this remote control may not
work with some Panasonic TVs.
• Some TV models cannot be operated using this remote
control (including all TVs non-remote compatible).
List of TVs Compatible with the VCR Remote Control
[Brand]
Panasonic/National
SONY
TOSHIBA
JVC
HITACHI
MITSUBISHI
SHARP
PHILIPS, SAMSUNG
NEC
SANYO
GOLDSTAR/LG
SAMSUNG
SANYO
This section shows you how to connect the VCR to an aerial,
TV, etc.
When the VCR is turned on after unpacking and
connecting the aerial cable and the mains lead, Plug in
Auto Tuning starts automatically. (NV-HV61GN only)
Basic Connections
The following connections are required to record and play
back the video cassette through the TV.
(1) Aerial (Not supplied)
(2) TV Set (Not supplied)
(3) Aerial Connector
(4) RF IN socket (45)
(5) RF OUT socket (48)
Connection to a TV using the Audio/Video Input Socket:
Set the RF output channel of the VCR to [ss] (RF OFF)
when the VCR is connected to the TV via the Audio/Video
cable. (See page 5.)
[Code]
01-04
05
06
07
08
09, 10
11
12
(1) Aerial (Not supplied)
(2) TV Set (Not supplied)
13
(3) Aerial Connector
(4) VIDEO IN
14
(5) AUDIO IN
(6) AV Cable (Supplied)
15, 16
(7) RF IN socket (45)
(8) RF OUT socket (48)
17, 18
Connection to a Stereo Amplifier:
19
(1) Stereo amplifier (Not supplied)
(2) For RECORDING
(3) For PLAYBACK
(4) AUDIO OUT (47)
(5) AUDIO IN (46)
4

Connections

(3)
2
VIDEO
~
AC IN
L
2
AUDIO
(6)
2
R
IN (AV1)
OUT
¢
(3)
(4)
2
VIDEO
~
AC IN
2
L
AUDIO
(10)
R
2
IN (AV1)
OUT
(9)
¢
(2)
2
¢
VIDEO
~
AC IN
2
L
AUDIO
2
R
(3)
IN (AV1)
OUT
(5)
(4)
(1)
(2)
(4)
2
IN
2
OUT
RF
(5)
(6) AC Input socket (42)
¢ To mains supply
(1)
(2)
(5)
(6)
(7)
2
IN
2
OUT
RF
(8)
(9) VIDEO OUT (44)/
AUDIO OUT (47)
(10)AC Input socket (42)
¢ To mains supply
2
IN
2
OUT
(1)
RF
¢ Audio Cables (Not supplied)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nv-hv61glNv-hv61gn

Table of Contents

Save PDF