Table of Contents
Advertisement
Quick Links
Copyright
Fujitsu Limited has made every effort to ensure the accuracy and completeness of this document. However, as
ongoing development efforts are continually improving the capabilities of our products, we cannot guarantee the
accuracy of the contents of this document. We disclaim liability for errors, omissions, or future changes.
LifeBook is a trademark of Fujitsu Limited.
Microsoft, Windows, MS, MS-DOS, and Windows NT are registered trademarks of the Microsoft Corporation of the
United States in the United States and other countries.
Intel is a registered trademark of the Intel Corporation of the United States.
Celeron is a trademark of the Intel Corporation of the United States.
ATI is registered trademark of ATI Techbologies INC.
Macrovision :-
This product incorporates copyright protection technology that is protected by method claims of certain U.S.
patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of
this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home
and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering
or disassembly is prohibited. Apparatus Claims of U.S. Patent Nos. 4,631,603, 4,577,216, 4,819,098 and 4,907,093
licensed for limited viewing uses only.
Dolby :-
Manufactured under license from Dolby Laboratories. "DOLBY", "PRO LOGIC," and the double-D symbol are
trademarks of Dolby Laboratories. Copyrights 1992-1999 Dolby Laboratories, All rights reserved.
Phoenix is a registered trademark of Phoenix Technologies Corporation of the United States.
K56flex is a trademark of Rockwell International Corporation and Lucent Technologies Corporation.
Other product names are trademarks or registered trademarks of their respective companies.
Other products are copyrighted by their companies.
Copyright© 1981-2000 Microsoft Corporation, All rights reserved.
Copyright© 2000 Phoenix Technologies, Ltd., All rights reserved.
All other products are trademarks or registered trademarks of their respective companies.
Explanations of the adjustments for the track pad cursor control are taken in part from the ALPS GlidePoint Driver
User's Guide, copyright by LCS/Telegraphics in 1996.
© Copyright 2000 Fujitsu Limited. All rights reserved. No part of this publication may be copied, reproduced, or
translated, without the prior written consent of Fujitsu Limited. No part of this publication may be stored or transmitted
in any electronic form without the written consent of Fujitsu Limited.
Declares that product: Model
This device complies with Part 15 of the FCC Rules. Operations are subject to the following two conditions:
(1) This device must not be allowed to cause harmful interference, (2) This device must accept any interference
received, including interference that may cause undesired operation.
DECLARATION OF CONFORMITY
according to FCC Part 15
Responsible Party Name
Address
Telephone
:
FPCA
:
Fujitsu PC (Asia) Pte Ltd
200 Pandan Loop
#05-03, Pantech 21
The Computer Centre
Singapore 128388
:
65-776 0688
:
LifeBook C6598/C6560
Complies with Part 15
of the FCC Rules.
Advertisement
Table of Contents
Related Manuals for Fujitsu LifeBook C6598
Summary of Contents for Fujitsu LifeBook C6598
- Page 1 © Copyright 2000 Fujitsu Limited. All rights reserved. No part of this publication may be copied, reproduced, or translated, without the prior written consent of Fujitsu Limited. No part of this publication may be stored or transmitted in any electronic form without the written consent of Fujitsu Limited.
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS Read these instructions carefully. Save these instructions for future reference. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water. - Page 3 AUSTRALIAN WARNINGS WARNING FOR SAFETY REASONS, ONLY CONNECT EQUIPMENT WITH A TELECOMMUNICATIONS COMPLIANCE LABEL. THIS INCLUDES CUSTOMER EQUIPMENT PREVIOUSLY LABELLED PERMITTED OR CERTIFIED. Connection of Non Certified/Approved peripherals may result in the equipment operating outside the Australian EMI Standards. Modems connected to the Australian telecommunications network must be operated in accordance with the Labelling Notice.
- Page 4 NEW ZEALAND WARNINGS The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services.
- Page 5 Note: Modem setting in Windows 98 / Windows Me The default modem setting in Windows 98 / Windows Me operating system is United States of America. If you are residing in Australia or New Zealand, please choose the appropriate country where you are located.
- Page 6 NOTATION IN THIS DOCUMENT Warnings This manual uses a variety of icons as visual marks so that you can use this computer safely and correctly and avoid damage and danger to yourself and to others. These icons and their mean- ings are as follows.
- Page 7 Notation in text Here is what symbols in text mean. Symbol Meaning Critical Point Indicates a point necessary for correctly operating the Critical Points hardware or software. Column Gives the meaning and brief explanation of a term. Column → Indicates the page to see elsewhere in this manual. Command input (key input) Within the text of this manual, command input (giving commands to the computer by pressing keys) is indicated as follows.
- Page 8 Configuration of this Manual SECTION 1 This section explains basic operations and basic items for using this computer, including the names of the parts and their functions, flat point operation methods, floppy disk unit handing, and battery operation. SECTION 2 This section explains installation of options for this computer.
-
Page 9: Table Of Contents
CONTENTS SECTION 1 1. Names of the Parts and their Functions ......2 Front ....................2 Right Side ..................5 Left Side ..................7 Rear/Bottom .................. 8 One-touch Buttons / CoolView / CoolScroll ......... 10 2. Keyboard ................14 Keyboard ..................14 Numeric Keypad Mode .............. - Page 10 SECTION 1 10. SPDIF Features .............. 42 How to use the SPDIF Output Connector? ........42 SECTION 2 1. Options ................44 Options ..................44 2. PC Cards ................46 Precautions for PC Cards ............46 Installing PC Cards ..............47 Removing PC Cards ..............
- Page 11 SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION 1 1 1 1 1 1 1 1 1 1 This section explains basic operations and basic items for using this computer, including the names of the parts and their functions, Flat point operation methods, floppy disk unit handing, and battery operation.
-
Page 12: Names Of The Parts And Their Functions
SECTION 1 1. Names of the Parts and their Functions Front... - Page 13 Display Panel Latch Locks the LCD panel so that it will not inadvertently be opened. To unlock and open the LCD panel, slide this latch to the right. Liquid Crystal Display (LCD) Panel Shows a screenful of data from the computer main unit. Critical Points About the characteristics of the LCD panel Note that the following symptoms reflect the characteristics of the LCD and imply no hardware...
- Page 14 CoolView Shows the status of messages from the personal computer, notification on incomming E-mail with messages and blinking backlight. Speakers Produce the sound of the personal computer. One-touch Button Pressed to activate an application or to receive incoming e-mail. This button is also used to play back an audio CD.
-
Page 15: Right Side
Right Side Caution Failure of an attached device or a hideous or deafening sound may cause harmful effects on your ears. Set the volume control on your personal computer’s main unit to its minimum before plugging a cable into the HEADPHONE, LINE IN, or MICRO IN jack. - Page 16 Stereo Line-in Jack and Optical Digital Audio Output Terminal The stereo line-in jack allows you to connect an external audio source. This terminal also serves as an Optical Digital Audio Output Terminal. The Optical Digital Audio Output Terminal allows you to download digital audio onto Sony & Philips Mini-disc player’s SPDIF (Sony Philips Digital Interface) format.
-
Page 17: Left Side
Left Side MAIN Switch The main power switch of the personal computer. Cooling Fan Used to vent hot air out of the personal computer interior. The fan starts rotating when the temperature inside the personal computer increases to a certain level. Caution Do not block the vent of the cooling fan. -
Page 18: Rear/Bottom
Rear/Bottom 67 890 ! - Page 19 Theft Prevention Lock Slot Can accept a commercially available theft prevention cable. Critical Points The theft prevention lock is compatible with the Kensington microsaver security system. Extended Keyboard/Mouse Connector Connects to an optional keyboard or mouse. Parallel Connector Connects to an optional printer. IEEE 1394 (DV) Terminal Used to connect between the personal computer and a peripheral, such as digital video camera (DV), with a DV cable.
-
Page 20: One-Touch Buttons / Coolview / Coolscroll
One-touch Buttons / CoolView / Cool Scroll "-$ % & ( ~ + , Mode Switch The position of the Mode Switch determines the functionality of the one-touch buttons. Set the Mode Switch at the center when you are not using one-touch button. CoolView Shows the status of and messages from the personal computer. - Page 21 One-touch Buttons The one-touch buttons are used to start applications, control audio CD, with the display panel closed. The functionality of the one-touch buttons is determined as summarized in the table below depending on the position of the Mode switch. Mode Switch Button Position...
- Page 22 CD Track Display The number of the track on playback is shown when an audio CD is being played back using the one-touch buttons for the CD player. • Numerals Indicate the track number of the track on playback. The track number of the first track is indicated when the CD player is in the stopped state.
- Page 23 Floppy Disk Drive Access ( Stays on when the floppy disk is being accessed. PC Card Access ( Stay on when the corresponding PC card is being accessed. Num Lock ( ) Indicator Stays on when the keyboard is in the numeric lock mode. Press [Num Lk] to turn on and off the numeric lock mode.
-
Page 24: Keyboard
SECTION 1 2. Keyboard Keyboard The keyboard is the device for giving instructions to the computer, inputting data, and executing. The keys can be divided into two types. : Control keys : Character keys Num Lk Insert Delete Pause Scr Lk Prt Sc SysRq Break... -
Page 25: Names Of The Main Keys And Their Functions
Names of the Main Keys and their Functions [Esc] (escape) key The usage is determined by the application software. It is often used to return to the previous operation. [F1]-[F12] (function) keys The usage depends on the application software. [Fn] key A key unique to this computer;... - Page 26 [Shift] key Used in combination with other keys. [Alt] key Used in combination with other keys; its functions depend on the application software. [Caps Lock] key To lock the keyboard into caps mode, press the Caps Lock key. Pressing this key again ends caps mode.
- Page 27 [Sys Rq] (system request) key When this key is supported by the application software, this key is used for such functions as resetting the keyboard. Press this key together with the Alt key. ] (Windows) key Press this key to display the Start menu. ] (Application) key Press this key to display the shortcut menu for the selected item.
-
Page 28: Turning On The Power
SECTION 1 3. Turning on the Power Turning on the power This item explains the normal way to turn the computer main unit power on and off. Connect the AC adaptor. Open the LCD display panel. Latch AC adaptor Pull the latch to release the lock, then lift the display panel with your hand. - Page 29 Critical Point Do not carry this computer around or subject it to shock or vibration with the power on. These can result in breakdown. Column POST is the abbreviation for POWER ON SELF TEST, which is a self-diagnostic test that checks for abnormalities within the computer.
-
Page 30: Turning Off The Power
SECTION 1 4. Turning off the Power Turning Off the Power This item explains how to turn off the power. Critical Points Do not turn back on the computer immediately after turning it off, but wait for 10 seconds or When the computer is not used for a long time, unload the floppy disk and the CD-ROM from the computer before turning it off. - Page 31 Critical Points If the MAIN switch is not turned off after the step 3, press the SUS/RES button to turn on the personal computer next time. If “Restart” or “Restart computer” is selected on the dialog box that appears as a result of the steps 2, the personal computer will be restarted.
-
Page 32: Suspend/Resume Function
SECTION 1 5. Suspend/Resume Function What Is the Suspend/Resume Function? When this computer is suspended with the SUS/RES button, the suspend/resume function retains the programs and data in memory as is so that you can resume operations immediately the next time you press the SUS/RES button. -
Page 33: Suspending
Suspending There are three ways to suspend this computer, using the SUS/RES button, Closed Cover switch and using the [Shut Down] dialog in Windowa 98 / Windows Me Using the SUS/RES button Suspending Check that are out. When you press the SUS/RES button, flashes and the computer goes into suspend mode. - Page 34 Using the Closed Cover switch Close the LCD display panel. This unit goes into suspend mode using the Closed Cover switch. Critical Point When the BIOS setup “Lid Closure Suspend” setting is “Disabled”, this unit does not go into suspend mode even if you close the LCD display panel.
-
Page 35: Using The Resume Function
Using the Resume Function You can make the computer resume the current application program, using either the SUS/RES button or the closed cover switch. Critical Point Immediately after putting it into the Suspend mode, do not make the computer resume the program but wait for 10 seconds or so. -
Page 36: Battery Charging
SECTION 1 6. Battery Battery Charging For portability, this computer can operate either from the AC adaptor or from its battery. This item explains how to charge the battery. Connect the AC adaptor. is displayed. AC adaptor During charging, is displayed on the status indicator LCD and the remaining battery charge is displayed. -
Page 37: Battery Operation
Battery Operation This item explains operation with the battery. Disconnect the AC adaptor and switch on When the main switch is on, press the the main switch. SUS/RES button. Main Switch SUS/RES switch stops flashing and stays lit up. Critical Points When the ambient temperature is lower, the battery operating time is reduced. -
Page 38: Checking The Remaining Battery Charge
Checking the Remaining Battery Charge This computer can indicates the amount of battery charge remaining with the remaining battery charge indicator on the status indicator LCD. Remaining battery charge indicator Indicates battery charge level of about 76% to about 100% Indicates battery charge level of about 51% to about 75% Indicates battery charge level of about 26% to about 50% Indicates battery charge level of about 16% to about 25%... -
Page 39: Low Battery State
Low Battery State This item explains the display when this computer’s battery is low and what to do. The low battery is announced in the following way. The warning beeps and the battery mark on the status indicator LCD flashes. Critical Point If the audio volume is set too low, you may not be able to hear the warning beep. -
Page 40: Replacing The Battery Pack
Replacing the Battery Pack Turn off the computer and disconnect the WARNING AC adaptor from it. (ELECTRIC SHOCK) Before replacing the battery pack, be sure to turn off the computer and disconnect the AC adaptor from it. Otherwise you might get an electric shock. - Page 41 Remove the battery pack. Install a new battery pack. Battery pack Battery pack Slide guide Tilt the battery pack up and then take it Put the battery pack in the slot by positioning out of the battery pack slot in a tilt the slide guide with the main unit.
-
Page 42: Bridge Battery
Bridge Battery The bridge battery is a NiCd battery that is built-in your notebook and is constantly being recharged. A bridge battery allows a charged Lithium ion battery to be exchanged for a discharged one by “warm-swapping”. To warm-swap have a charged battery ready, put your notebook in Suspend mode, remove the low battery and quickly insert a charged battery. -
Page 43: Precautions For Battery Pack
Precautions for Battery Pack WARNING (ELECTRIC SHOCK) The battery pack is an extremely delicate products. When installing or removing one, do not drop it or subject it to strong shocks. If this should happen, do not use that battery pack in the interest of safely, because there is a risk of electric shock or malfunction. Discharge After you charge the battery pack, even if you store it without using it, over about 1 month it will naturally discharge. -
Page 44: Floppy Disk Drive
SECTION 1 SECTION 1 7. Floppy Disk Drive Loading/Ejecting a Floppy Disk This item explains how to load and eject a floppy disk. Ejecting Loading Press the EJECT button. Insert into the floppy disk drive. Eject Eject button button Insert the floppy disk with the label Check that the on the Status Indicator upwards and the shutter side first until the... -
Page 45: What Is A Floppy Disk
What is a Floppy Disk? A floppy disk is a medium for storing programs or data. This item explains basic knowledge and precautions regarding floppy disks. Types of floppy disks If floppy disks are classified according to the amount of data they can store (the memory capacity), typically there are the following 2 types. -
Page 46: Precautions On Handling
Precautions on Handling Take the following precautions when using floppy disks in order to avoid damaging them. Be careful not to spill liquids such Do not place them in places with Do not bend them or place heavy as coffee onto them. high temperatures or in direct objects on top of them. -
Page 47: Cd-Rom Drive
SECTION 1 8. CD-ROM Drive CD-ROMs Take the following precautions when handling CD-ROMS. When removing a CD-ROM from its case, lift it out while pressing the center holder of the case, as in the diagram on the right. Handle the CD-ROM by its edges, trying as much as possible not to touch the surfaces. -
Page 48: Loading/Ejecting A Cd-Rom
Loading/Ejecting a CD-ROM This item explains how to load/eject a CD-ROM. Critical Point Press the EJECT button. There is a protective sheet on the expansion unit’s CD-ROM tray upon delivery. Remove this sheet when you use the CD-ROM drive. You can only install/eject a CD-ROM when the computer main unit is in operating mode because of the electronic lock of the CD-ROM drive. - Page 49 Set the tray. Push the tray in gently. Critical Points CD-ROM drive is an extremely delicate device in which the CD-ROM revolves at high speed. Do not carry it when the power to the computer is switched on, and do not expose it to shocks or vibrations.
-
Page 50: Internal Fax Modem
SECTION 1 9. Internal Fax Modem What is a Fax Modem? A modem is a device for exchanging data between a computer and a telephone line. If you have a modem, you can carry out computer communications (connecting computers by a telephone line and exchanging information). -
Page 51: Modem Warnings
Modem Warnings CAUTION The internal modem has a maximum speed of 56000bps by ITU-T V.90 standard. Its maximum speed of 53000bps is the highest allowed by FCC, and its actual connection rate depends on the line conditions. The maximum speed is 33600bps at upload. CAUTION The internal modem is not intended for use with Digital PBX systems. -
Page 52: Spdif Features
SECTION 1 10. SPDIF Features How to use the SPDIF Output Connector? This model comes equipped with an Optical Digital Audio Out connector which allows you to connect to devices (Sony or Philips MiniDisc players) which supports SPDIF (Sony Philips Digital Interface) format. - Page 53 SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION 2 2 2 2 2 2 2 2 2 2 This section explains installation of options for this computer.
-
Page 54: Options
SECTION 2 1. Options Options You can expand the functions of this computer by connecting various options. Connecting options such as a printer or a modem card makes it possible to print documents created with this computer and to communicate them to other computers. Other options include hard disks and expansion memory. - Page 55 WARNING (ELECTRIC SHOCK) Only connect equipment recommended by Fujitsu. Connecting any other equipment can cause electric shock, fire, or breakdown. CAUTION (INJURY) When installing/removing options, do not remove any screws other than those specified by this manual. Removing any other screws can cause injury and breakdown.
-
Page 56: Pc Cards
SECTION 2 2. PC Cards Precautions for PC Cards Observe the following points when using PC cards to prevent breakdown. Do not place PC cards in high- Do not subject PC cards to Avoid rubbing PC cards and temperature locations and strong shocks. -
Page 57: Installing Pc Cards
Installing PC Cards PC card is a generic term for business card sized cards which have a program and data memory function or peripheral equipment functions such as a modem or LAN adaptor. This item explains how to install a PC card. Install the PC card. -
Page 58: Removing Pc Cards
Removing PC Cards This item explains how to remove a PC card. Click the PC card indicator on the task Click the PC card to be removed. bar. The PC card operations stop and the A message is displayed for stopping the following screen is displayed. -
Page 59: Expansion Ram Modules
SECTION 2 3. Expansion RAM Modules Installing an Expansion RAM Module This item explains how to install expansion RAM modules. Turn off the computer and disconnect WARNING the AC adaptor. Always turn computer and disconnect the AC adaptor when installing an expansion RAM module in order to avoid electric shock. - Page 60 Fit the cover. Cover Fit the cover removed in 2. CAUTION The expansion RAM module is made up of parts that are extremely vulnerable to static electricity and can be damaged by the static electricity built up in the body. When installing or removing an expansion RAM module, hold it by the edges.
-
Page 61: Removing An Expansion Ram Module
Removing an Expansion RAM Module This item explains how to remove an expansion RAM module. WARNING Always turn off the computer and disconnect the AC adaptor when removing an expansion RAM module in order to avoid electric shock. Remove the cover. Turn off the computer and disconnect the AC adaptor from it. -
Page 62: Mouse
SECTION 2 4. Mouse Connecting the Mouse Turn off the computer and disconnect Connect the connector at the end of the AC adaptor from it. the mouse cable to the expansion keyboard/mouse connector on the rear side of the computer main unit. Main Switch connector Have the arrow marked on the connector... - Page 63 Button operations • Click Press the left mouse button once until it clicks. The action of pressing the right button once firmly enough that it clicks is called a “right click”. Click • Double click Press the mouse left button two times quickly in a row.
-
Page 64: Numeric Keypad / Keyboard / Mouse
SECTION 2 5. Numeric Keypad / Keyboard / Mouse Connecting a Numeric Keypad / Keyboard / Mouse This item explains how to connect a numeric keypad. Turn off the MAIN switch. Connect the numeric keypad. Main switch connector Slide the MAIN switch in the direction of Have the arrow marked on the connector facing down. -
Page 65: Printer
SECTION 2 6. Printer Connecting a Printer This item explains how to connect a printer to the parallel interface connector on the rear of the computer main unit. WARNING (ELECTRIC SHOCK) Always turn off the computer main unit and disconnect the AC adaptor before connecting/ disconnecting a printer. - Page 66 Turn off the main unit and disconnect the AC adaptor. Connect the printer to the computer main unit. Connect the printer cable securely at both ends and fasten securely at both ends with the screws and fixtures. Connect the printer’s power cord and turn on its power. Connect the AC adaptor to the computer main unit and press the SUS/RES button.
-
Page 67: Crt Monitor / Tv
SECTION 2 7. CRT Monitor / TV Connecting an External CRT Monitor An external CRT monitor can be connected to this computer. This item explains how to connect a CRT monitor to the CRT interface connector on the rear of the computer main unit. WARNING (ELECTRIC SHOCK) Always turn off the computer main unit and disconnect the AC adaptor before connecting/... -
Page 68: Connecting To A Tv
Connect the AC adaptor to the computer main unit and switch on main switch. Connect the CRT monitor’s power cord and press the SUS/RES button. Switch the screen display. When you press [Fn] + [F10], the display switches to the next step in the sequence: LCD →... -
Page 69: Wireless Mouse
SECTION 2 8. Wireless Mouse This chapter explains fundamentals of handling and operation of the wireless mouse with matters that require attention. Before using the wireless mouse, carefully read this chapter so that you’ll have a good knowledge to use this wireless mouse. Precautions on safety Strictly observe the following instructions for safe use of the wireless mouse. - Page 70 CAUTION Don’t leave the wireless mouse in a place where it is directly exposed to the sun or the temperature is expected to rise extremely, for example, in a car exposed to the scorching sun, for a long time. Extremely high temperature may cause the cover and other parts of the wireless mouse to be heated, deformed, melted, or to fire because its inside is heated.
-
Page 71: Preparation And Preliminary Knowledge
Preparation and Preliminary knowledge Loading of batteries Load the wireless mouse with two AAA-size alkaline batteries referring to the article “Replacing batteries” of this manual. H-L-OFF switch Infrared transmission power of this wireless mouse can be switched between low and high with the H-L-OFF switch. -
Page 72: Setup Of Personal Computer And Wireless Mouse
Setup of personal computer and wireless mouse Setup of personal computer See Bios section to enable infrared mouse. Ensure that the setup menu is Enabled. Critical Points When “enabled” is selected for the item of “Infrared mouse”, the external PS/2 mouse that is connected with the extension keyboard/mouse connector is unusable. -
Page 73: Replacing Batteries
Replacing batteries Remove the lid of the battery chamber. Remove the old batteries. Fit the lid of the battery chamber to Set new batteries in the battery chamber. the wireless mouse. Pay heed to the polarities (+ and - poles) of each battery so as to set it in correct orientation. -
Page 74: For Good Maintenance
For good maintenance If the ball or roller of the wireless mouse gets dust or soiled, it may cause malfunction of the mouse. Be sure to clean the mouse regularly (once a month or so) according to the following procedure. Remove the mouse ball cover. -
Page 75: Caution
Caution Don’t use the wireless mouse pointing it at the infrared communication port of the personal computer to avoid malfunction of the infrared communication port. If the button of the wireless mouse is held depressed, the battery is depleted in a short time. Don’t put anything on the mouse and don’t leave the mouse upside down. -
Page 76: Specifications
Specifications Item Description Transmission system Infrared transmission Service life of battery 6 months approximately (under operating conditions: (alkaline battery) 8-hours/day, 5-days/week, net operating rate of mouse (in Low Power mode) = 10 %) (condition not in use: power off, temperature 20 degree centigrade) Operable range H: Distance - within 1.5 m, angle - right and left 0 degree,... - Page 77 SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION SECTION 3 3 3 3 3 3 3 3 3 3 This section explains what to do when trouble occurs with this computer and when messages are displayed. Read this section as the necessity arises.
-
Page 78: When This Happens
SECTION 3 1. When This Happens When you are having trouble with this computer, there is something you think is strange, or there is something you want to do, but do not know how. This section is divided into related items. - Page 79 Checkpoint Cause and Solution Have you been pressing any On this computer, if the power management functions are set of the keys? and no key is pressed for a certain period of time, the CPU stops and the LCD panel backlight goes out. (In this state, pressing any key lights up the backlight again.) If the computer stops too frequently, change the BIOS setup settings.
- Page 80 The remaining battery charge indicator does not stop flashing. Checkpoint Cause and Solution Is the battery connected Check that the battery is connected correctly. If it is connected correctly? correctly, there is an abnormality in the battery pack, so replace the battery pack.
- Page 81 No sound or minimal sound from speaker Checkpoint Cause and Solution Is the volume control Turn the volume control for the correct volume. If this does not correctly adjusted? change the volume, double click the task bar sound indicator and adjust the volume.
- Page 82 Data cannot be read from the CD-ROM drive. Checkpoint Cause and Solution Is the CD-ROM correctly set? Set the CD-ROM correctly with its label facing upwards. Is there any dirt, condensation Wipe it from the center outwards with a dry, soft cloth. or water on the CD-ROM? Is the CD-ROM scratched or Replace the CD-ROM.
-
Page 83: Care And Maintenance
SECTION 3 2. Care and Maintenance If you use your Fujitsu LifeBook notebook carefully, you will increase its life and reliability. This section provides some tips for looking after the notebook and its devices. Caution: Electrical equipment may be hazardous if misused. Operations of this product or similar products, must always be supervised by an adult. - Page 84 Storing your LifeBook Notebook • If storing your notebook for a month or longer, turn your LifeBook notebook off and remove all Lithium Ion batteries. • Store your LifeBook notebook and batteries separately. If you store your notebook with a battery installed, the battery will discharge, and battery life will be reduced.
-
Page 85: Floppy Disks And Drives
• When travelling with the hard drive removed, wrap the drive in a non-conducting materials (cloth or paper). If you have the drive checked by hand, be ready to install the drive if needed. Never put your hard drive through a metal detector. Have your hard drive hand-inspected by security personnel. - Page 86 Caring for your Floppy Disk Drive • To clean, wipe the floppy disk drive clean with a dry soft cloth, or with a soft cloth dampened with water or a solution of neutral detergent. Never use benzene, paint thinner or other volatile material. •...
- Page 87 Caring for your DVD/CD-RW/CD-ROM Drive Your DVD/CD-RW/CD-ROM drive is durable but you must treat it with care. Please pay attention to the following points: • The drive rotates the compact disk at a very high speed. Do not carry it around or subject it to shock or vibration with the power on.
-
Page 88: Glossary
SECTION 3 3. Glossary AC Adapter A device which converts the AC voltage from a wall outlet to the DC voltage needed to power your notebook. Active-Matrix Display A type of technology for making flat-panel displays which has a transistor or similar device for every pixel on the screen. - Page 89 CMOS RAM Complementary metal oxide semiconductor random access memory. This is a technology for manufacturing random access memory which requies very low level power to operate. COMM Port Abbreviation for communication port. This is your serial interface connection. Command An instruction which you give your operating system. Example: run a particular application or format a floppy disk.
- Page 90 Megahertz 1,000,000 cycles per second. Memory A repository for data and applications which is readily accessible to your notebook CPU. Megahertz. MIDI Musical Instrument Digital Interface. A standard communication protocol for exchange of information between computers and sound producers such as synthesizers. Modem A contraction for MOdulator-DEModulator.
- Page 91 Pitch (keyboard) The distance between the centers of the letter keys of a keyboard. Pixel The smallest element of a display, a dot of color on your display screen. The more pixels screen. The more pixels per area the clearer your image will appear. POST Power On Self Test.
- Page 92 Electro-Static Discharge. The sudden discharge of electricity form a static charge which has built-up slowly. Example: the shock you get from a doorknob on a dry day or the sparks you get form brushing hair on a dry day. Extended Memory All memory more than the 640KB recognized by MS-DOS as system memory.
- Page 93 Kilobyte. Program An integrated set of coded commands to your computers telling your hardware what to do and how and when to do it. PS/2 An IBM series of personal computers which established a number of standards for connecting external devices such as keyboards and monitors.
- Page 94 SMART Self-Monitoring, Analysis and Reporting Technology (SMART) is an emerging technology that provides near-term failure predictions for hard drives. When SMART is enabled the hard drive monitors predetermined drive attributes that are susceptible to degradation over time. If a failure is likely to occur.
- Page 95 VRAM Video Random Access Memory. A memory dedicated to video display data and control. Wired for Management is Intel’s broad-based initiative to reduce the total cost of ownership (TCO) of business computing without sacrificing power and flexibility. Write Protect Prevent alteration of the binary state of all bits in a storage media. Example: all information on a device such as a floppy diskette;...
- Page 96 Fujitsu PC (Asia) Pte Ltd 200 Pandan Loop #05-03 Pantech 21 The Computer Centre Singapore 128388 Tel: 65-776 0688 Fax: 65-776 0788 Fujitsu PC (Asia) Pte Ltd (Malaysia Branch) 8th Floor Wisma Damansara Jalan Semantan 50490 Kuala Lumpur Malaysia Tel:...