Table of Contents
Advertisement
Use the Menu Key
to scroll through
the Menus
Section 5.5, Page 34
CONFIG.ALARMS
Config. Alarm 1
A1: Type
A1: Assign
Use the Downscroll
A1: Failsafe
Key to scroll through
the Frames
A1: Action
within each Page
A1: Setpoint
A1: Hysteresis
A1: Delay
Section 5.6, Page 38
CONFIG.OUTPUTS
Config. Output 1
AO1: Assign
AO1: Range
AO1: Span Value
AO1: Zero Value
AO1: Default
AO1: Default Val
Section 5.7, Page 40
CONFIG.CLOCK
Set Clock?
Format
Date
Time
Press
To Set
Displayed only if option board fitted and serial communications feature enabled (Section 7.3) –
CONFIG.SERIAL
see Supplementary Manual PROFIBUS Datalink Description (IM/PROBUS)
CONFIG. CONTROL
Single Input Analyzer Only — see Supplementary Manual PID Control (IM/AX4PID)
Section 5.8, Page 41
CONFIG.SECURITY
Alter Sec.Code
Alter Cal.Code
Section 5.9, Page 41
CONFIG.LOGBOOK
Section 5.10, Page 42
TEST/MAINTENANCE
Test Outputs
Test Output 1
Test Output 2
Test Output 3
Test Output 4
To
FACTORY SETTINGS
(see Section 7.3, Page 57)
Use the Sidescroll Key to scroll through the Pages within each Menu
Config. Alarm 2
A2: Type
A2: Assign
A2: Failsafe
A2: Action
A2: Setpoint
A2: Hysteresis
A2: Delay
Config. Output 2
AO2: Assign
AO2: Range
AO2: Span Value
AO2: Zero Value
AO2: Default
AO2: Default Val
dd/mm/yy
01:01:02
12:00
Press
To Abort
Logbook
Maintenance
Hold Outputs
Automatic Time
Press
Fig. 2.3B Overall Programming Chart
Config. Alarm 3
A3: Type
A3: Assign
*
A3: Failsafe
Wash Mode
Wash Frequency
A3: Action
Wash Duration
A3: Setpoint
A3: Hysteresis
Recovery Period
A3: Delay
*
Applicable only
to Alarm 3
Config. Output 3
Config. Output 4
AO3: Assign
AO4: Assign
AO3: Range
AO4: Range
AO3: Span Value
AO4: Span Value
AO3: Zero Value
AO4: Zero Value
AO3: Default
AO4: Default
AO3: Default Val
AO4: Default Val
Key
Load/Save Config
Factory Config.
User Config.
To Set
Press
To Abort
2 OPERATION...
Config. Alarm 4
Config. Alarm 5
A4: Type
A5: Type
A4: Assign
A5: Assign
A4: Failsafe
A5: Failsafe
A4: Action
A5: Action
A4: Setpoint
A5: Setpoint
A4: Hysteresis
A5: Hysteresis
A4: Delay
A5: Delay
Available only if option board fitted and
analog features enabled – see Section 7.3
5
- Quick Links:
- Sensor Calibration
Hide quick links:
Advertisement
Table of Contents
