uMove function
This function activates the entire flexible cooking zone,
M o v e f u n c t i o n
which is divided into three cooking areas and which has
preset heat settings.
Only use one item of cookware. The size of the cooking
area depends on the cookware used and whether it is
positioned correctly.
Cooking areas
This means that an item of cookware can be moved
during the cooking process to another cooking area
with another heat setting:
Preset heat settings:
Front area = heat setting
Middle area = heat setting
Rear area = heat setting
The preset heat settings can be changed independently
of one another. You can find out how to change these in
the section on ~ "Basic settings".
Notes
If more than one item of cookware is detected on the
■
flexible cooking zone, the function is deactivated.
If the cookware is moved within the flexible cooking
■
zone or lifted up, the hob automatically starts
searching and the heat setting of the area in which
the vessel was detected is set.
You can find information on the size and positioning
■
of the cookware in the section on ~ "Flex Zone"
Š
†
‚
.
†
Activation
Select one of the two hotplates in the flexible
1.
cooking zone.
Touch the
ÿ
symbol; it lights up more brightly. The
2.
flexible cooking zone is activated as a single
hotplate.
The heat setting in the area in which the cookware is
located lights up in the hotplate display.
The function has now been activated.
Changing the heat setting
The heat settings for the individual cooking areas can
be changed during the cooking process. Set the
cookware down on the cooking area and change the
heat setting in the settings range.
Notes
Only the heat setting in the area in which the
■
cookware is located is changed.
If the function is deactivated, the heat settings for the
■
three cooking areas are reset to the preset values.
Deactivating
Touch the
symbol. It lights up dimly.
ÿ
The function was deactivated.
If one of the cooking areas is set to
Note:
function deactivates after a few seconds.
Move function
en
, the
‹
21