Page 1
KD-LX333R 3 7 63 1515 0 SERVICE MANUAL CD RECEIVER KD-LX333R KD-LX333R L 13942296513 SOURCE Area Suffix Continental Europe Central Europe Contents Safety precaution Flow of finctional operation intil opelation Preventing static electricity until TOC read 1-14 Disassembly method...
KD-LX333R 3 7 63 1515 0 Safety precaution Burrs formed during molding may be left over on some parts of the chassis. Therefore, pay attention to such burrs in the case of preforming repair of this system. Please use enough caution not to see the beam directly or touch it in case of an adjustment or operation check.
Page 3
KD-LX333R 3 7 63 1515 0 Preventing static electricity Electrostatic discharge (ESD), which occurs when static electricity stored in the body, fabric, etc. is discharged, can destroy the laser diode in the traverse unit (optical pickup). Take care to prevent this when performing repairs.
KD-LX333R 3 7 63 1515 0 Disassembly method Bottom cover <Main body> Removing the top chassis (See Fig.1 to 5) Remove the two screws A attaching the bottom cover to the top chassis on the bottom of the body.
Page 5
KD-LX333R 3 7 63 1515 0 Removing the front panel assembly (See Fig.6 to 8) Prior to performing the following procedure, remove the top chassis assembly. Disconnect the flexible harness from connector CN701 on the main board assembly. CN701 Remove the four screws H attaching the front panel assembly on both sides of the body.
Page 6
KD-LX333R 3 7 63 1515 0 Removing the lifter unit (See Fig.10) Prior to performing the following procedure, remove the top chassis assembly and the front panel assembly. Disconnect the harness from connector CN503and CN504 CN503 CN504 on the main board.
Page 7
KD-LX333R 3 7 63 1515 0 Removing the operation assembly (See Fig.13 to 16) Prior to performing the following procedure, remove the top chassis assembly, the front panel assembly and the lifer unit. Disconnect the card wire from connector CN702 on Bracket (L) the main board and remove the operation assembly.
Page 8
KD-LX333R 3 7 63 1515 0 Removing the operation switch board (See Fig.17 and 18) Prior to performing the following procedure, remove the operation assembly. Remove the six screws N attaching the button panel on the operation assembly. Pull out the operation switch board from inside of the Button panel button panel.
Page 9
KD-LX333R 3 7 63 1515 0 Removing the main board assembly (See Fig.20 to 22) Prior to performing the following procedure, remove the top chassis. CN504 Disconnect the flexible harness from connector CN503 CN701, the card wire from CN702 on the main board...
KD-LX333R 3 7 63 1515 0 Damper bracket <CD mechanism section> CD mechanism assembly Removing the CD mechanism control board (See Fig.1 and 2) Unsolder the part a and b on the CD mechanism control board. Remove the stator fixing the CD mechanism control board and the damper bracket (To remove the stator smoothly, pick up the center part).
Page 11
KD-LX333R 3 7 63 1515 0 Damper bracket assembly CD mechanism Removing the CD mechanism assembly (See Fig.1, 6 to 9) Prior to performing the following procedure, remove the CD mechanism control board and the front bracket (loading motor).
Page 12
KD-LX333R 3 7 63 1515 0 Removing the feed motor assembly FD screw Part i Feed motor assembly (See Fig.10) Prior to performing the following procedure, remove the CD mechanism control board, the front bracket Part j (loading motor) and the CD mechanism assembly.
KD-LX333R 3 7 63 1515 0 Adjustment method Test instruments required adjustment Standard volume position 1.Digital oscilloscope (100MHz) Balance and Bass & Treble volume : Indication "0" 2.AM Standard signal generator Loudness : OFF 3.FM Standard signal generator Frequency Band 4.Stereo modulator...
Page 14
KD-LX333R 3 7 63 1515 0 Flow of functional operation until TOC read Power ON Set Function CD When the laser diode correctly When the pickup correctly moves emits to the inner area of the disc Microprocessor $82 $81...
Page 15
KD-LX333R 3 7 63 1515 0 Feed section Is the voltage output at Is the wiring for IC541 Is 3.3V present at IC501 IC541 pin "40" 5V or 0V? (56)~(64) correct? pin "20"? Check CD 8V Check the vicinity of and 5V.
Page 16
KD-LX333R 3 7 63 1515 0 Maintenance of laser pickup (1) Cleaning the pickup lens Before you replace the pickup,please try to clean the lens with a alcohol soaked cotton swab. (2) Life of the laser diode When the life of the laser diode has expired.
Page 18
KD-LX333R 3 7 63 1515 0 2.Pin function (1/2) TC9490FA(2/3) Pin No. Symbol Function Bit clock outputpin 32fs, 48fs, or 64fs selectable by command. LRCK L/R channel clock output pin."L" for L channe and "H" for R channel. Output polarity can be inverted by command.
Page 19
KD-LX333R 3 7 63 1515 0 2.Pin function (2/2) TC9490FA(3/3) Pin No. Symbol Function RFGC RF amplitude adjustment control signal output pin. TEBC Tracking balance control signal output pin. APC circuit ON/OFF signal output pin. At laser on,high impedance with UHS="L"...
Page 21
KD-LX333R 3 7 63 1515 0 3.Pin function Pin No. Symbol Function 3.3V Power supply pin Main-beam amp input pin Main-beam amp input pin Sub-beam amp input pin Sub-beam input pin Monitor photo diode amp input pin Laser diode amp output pin APC circuit ON/OFF control signal,laser diode (LDO) control signal input or bottom/peak detection frequency change pin.
Page 22
KD-LX333R 3 7 63 1515 0 TA8273H (IC941) : Power amp 1.Block diagram 2200 F 0.022 F Vcc 1/2 Vcc 3/4 INRF OUT RF+ 0.22 F OUT RF- AC CONT1 Protective circuit OUTRR+ INRR OUTRR- 0.22 F L 13942296513...
Page 23
KD-LX333R 3 7 63 1515 0 2.Terminal layout 3.Pin function TA8273H Pin No. Symbol Function Header of IC AC CONT 1 Power GND OUTRR- Outpur(-) for Rear Rch STBY Stand by input Output (+) for Rear Rch OUTRR+ VCC1/2...
Page 24
KD-LX333R 3 7 63 1515 0 UPD784217AGC168 (IC701) : Main micon 1.Pin layout 100 ~ 76 26 ~ 50 2.Pin functions(1/3) Pin No. Symbol Function CD mechanical switch 2 detection signal input CD mechanical switch 3 detection signal input...
Page 25
KD-LX333R 3 7 63 1515 0 2.Pin functions(2/3) Pin No. Symbol Function LCD-CE1 Chip enable output 1 to LCD driver BUZZER Buzzer output 12C-DAI 12C communication data input 12C-DAO 12C communication data output 12C-CLK 12C communication clock output BUS-I/O...
Page 26
KD-LX333R 3 7 63 1515 0 2.Pin functions(3/3) Pin No. Symbol Function BUSO Data communication input and output port 0 with CDLSI BUS1 Data communication input and output port 1 with CDLSI BUS2 Data communication input and output port 2 with CDLSI...
Page 28
KD-LX333R 3 7 63 1515 0 BR24C32F-X (IC703) : EEPROM 1. Pin layout 2. Pin function WPIN Symbol I/O Function Power supply. A0,A1,A2 No use connect to GND. Serial clock input. Serial data I/O of slave and word address.
Page 32
KD-LX333R 3 7 63 1515 0 HD74HC126FP (IC771) : Changer control NJM2100M (IC821) : Operational amp A OUT B OUT – A IN– + – A IN+ B IN– B IN+ HD74HC126 M5282FP-X (IC321) : E. volume 1. Pin layout 2.
Page 34
KD-LX333R 3 7 63 1515 0 L 13942296513 u163 VICTOR COMPANY OF JAPAN, LIMITED MOBILE ELECTRONICS DIVISION PERSONAL & MOBILE NETWORK BUSINESS UNIT. 10-1,1Chome,Ohwatari-machi,Maebashi-city,371-8543,Japan 200206 (No.49715) http://www.xiaoyu163.com...
KD-LX333R 3 7 63 1515 0 SCHEMATIC DIAGRAMS CD RECEIVER KD-LX333R CD-ROM No.SML200106 KD-LX333R SOURCE L 13942296513 Area Suffix Continental Europe Central Europe Contents Block diagram Standard schematic diagrams 2-3,4 Printed circuit boards u163 No.49715SCH COPYRIGHT 2002 VICTOR COMPANY OF JAPAN, LTD.
Page 36
http://www.xiaoyu163.com 3 7 63 1515 0 < M E M O > L 13942296513 u163 http://www.xiaoyu163.com...
Page 38
KD-LX333R KD-LX333R 3 7 6 3 1 5 1 5 0 Standard schematic diagram Main amp section 1 3 9 4 2 2 9 6 5 1 3 Parts are safety assurance parts. When replacing those parts make sure to use the specified one.
Page 41
http://www.xiaoyu163.com 3 7 63 1515 0 < M E M O > L 13942296513 u163 http://www.xiaoyu163.com...
Page 42
KD-LX333R 3 7 63 1515 0 L 13942296513 u163 VICTOR COMPANY OF JAPAN, LIMITED MOBILE ELECTRONICS DIVISION PERSONAL & MOBILE NETWORK BUSINESS UNIT. 10-1,1Chome,Ohwatari-machi,Maebashi-city,371-8543,Japan 200206 (No.49715SCH) http://www.xiaoyu163.com...
LX-333R 3 7 63 1515 0 PARTS LIST [ KD-LX333R ] * All printed circuit boards and its assemblies are not available as service parts. Area suffix L 13942296513 E ----------- Continental Europe EX --------------- Central Europe - Contents - 3- 3 Exploded view of general assembly and parts list (Block No.M1)
KD-LX333R 3 7 6 3 1 5 1 5 0 Exploded view of general assembly and parts list Block No. 80 88 82 86 80 89 1 3 9 4 2 2 9 6 5 1 3 w w w...
Page 46
KD-LX333R KD-LX333R 3 7 6 3 1 5 1 5 0 Parts list (General assembly) Parts list (General assembly) Block No. M1MM Block No. M1MM Item Parts number Parts name Q'ty Description Area Item Parts number Parts name Q'ty...
Page 47
http://www.xiaoyu163.com LX-333R 3 7 63 1515 0 CD mechanism assembly and parts list Block No. Grease G-31SA G-31SA(Bottom side) TN-CCD1001Z-150S CFD-005H L 13942296513 133 22 u163 http://www.xiaoyu163.com...
KD-LX333R 3 7 63 1515 0 Parts list (CD mechanism) Block No. MBMM Item Parts number Parts name Q'ty Description Area 30310101T FRAME 30310103T DANPER PIN 303101073T UPPER PL(3) 30310108T SEL STOP PLATE 30310164T SEL ARM (L8)L SEL ARM (R)L...
http://www.xiaoyu163.com LX-333R 3 7 63 1515 0 Parts list (CD mechanism) Block No. MBMM Item Description Parts number Parts name Q'ty Area DET SWITCH 2 ESE22MH1 64180402T DET SWITCH 2 ESE22MH3 64180403T 68150232T CONNECTOR 1 TKC-W26X-C1 30311105T SOPPORT PLATE 30311138T GR MT BLK(N) 30311109T LDG GEAR (2)
Page 50
KD-LX333R 3 7 63 1515 0 Electrical parts list (Main board) Block No. 01 Item Remarks Item Remarks Parts number Parts name Area Parts number Parts name Area BZ791 000393760 BUZZER CD11PA-XZ C253 CZ1216D2J C.CAPACITOR 120 PF CN301 KN2507297 CONN.TERMINAL...
Page 51
http://www.xiaoyu163.com LX-333R 3 7 63 1515 0 Electrical parts list (Main board) Block No. 01 Item Parts number Parts name Remarks Area Item Parts number Parts name Remarks Area C507 CY103623J C.CAPACITOR 0.01 MF C719 CZ2216D2J C.CAPACITOR 220PF C508 CY104423J C.CAPACITOR 0.1 MF C720...
Page 52
KD-LX333R 3 7 63 1515 0 Electrical parts list (Main board) Block No. 01 Item Parts number Parts name Remarks Area Item Parts number Parts name Remarks Area D701 DI0CRS03L SI.DIODE CRS03-X Q501 TRB1241(PQR)8 TRANSISTOR 2SB1241 (PQR) D711 DI1SS400L SI.DIODE...
Page 53
http://www.xiaoyu163.com LX-333R 3 7 63 1515 0 Block No. 01 Electrical parts list (Main board) Item Remarks Item Parts number Parts name Remarks Area Parts number Parts name Area R211 RK224JA0J COMP.RESISTOR 1/10W 220K R352 RK224JA0J COMP.RESISTOR 1/10W 220K R213 RK472JA0J C.RESISTOR 1/10W 4.7 K...
Page 54
KD-LX333R 3 7 63 1515 0 Electrical parts list (Main board) Block No. 01 Item Remarks Item Parts number Parts name Remarks Area Parts number Parts name Area R585 RK682JA0J C.RESISTOR 1/10W 6.8 K R763 RK222JA0J C.RESISTOR 1/10W 2.2 K...
Page 55
http://www.xiaoyu163.com LX-333R 3 7 63 1515 0 Block No. 02 Electrical parts list (Front board) Item Remarks Item Remarks Parts number Parts name Area Parts number Parts name Area R611 RK472JA0J C.RESISTOR 1/10W 4.7 K CN601 KZ040160L CONN.TERMINAL 16P FPC CONNECT CN631 KZ040060L CONN.TERMINAL...
Page 56
KD-LX333R 3 7 63 1515 0 Packing materials and accessories parts list Block No. Block No. A11,A18,A21 L 13942296513 A3,A22,A23 A6,A7,A8, A9,A10 A12,A13,A14,A15, A16,A17,A20 u163 3-14 http://www.xiaoyu163.com...
Page 57
http://www.xiaoyu163.com LX-333R 3 7 63 1515 0 Parts list (Packing) Block No. M3MM Item Parts number Parts name Q'ty Description Area PPB022000 POLLY BAG 1 QPC03004315P PPB022200 POLLY BAG 1 QPA00801205 PPB022100 POLLY BAG 2 FSPG4002-001A CUSHION DG2153010 PDB450196 GIFT BOX Parts list (Accessories) Block No.