OWNER’S HANDBOOK FOR WET & DRY VACUUM CLEANERS FLEXIO II / MODEL : Z 930 / Z 931 Please read these operating instructions before operating your vacuum cleaner. Operating Instructions...
Electrolux service centre. The safety standards of Electrolux electrical appliances are in keeping • To protect against electric shock do with the recognised rules of technology not immerse the electrical cord, plug...
Detach the flexible authorized Electrolux service centre hose firmly from the air intake duct and only genuine Electrolux spare by turning anti-clockwise. parts should be used. Failure to do so may render the warranty void.
Floor Brush Ideal for the daily cleaning on carpets and hard floors. • Fit the extension tube to the handle. • Fit the brush to the extension tube. For the carpet Fitting a chosen nozzle Extension Tube Floor Brush • Floor brush is intended for cleaning hard floors and carpets. For the hard floor • Crevice/upholstery nozzle is for cleaning corners and cushions.
Operating Procedure Crevice Nozzle Power Regulation • The crevice nozzle can be used for cleaning corners, between cushions or difficult to reach places. • Before using the appliance, pull out Dusting Brush a sufficient length of cord and insert the plug into the power supply. • Press the On/Off button to switch the unit on. To stop it, press the On/ Off button again.
• Please ensure the filter cylinder is Note: When the vacuum cleaner is fitted. working, the suction may get weak. Now you should turn off the unit for • Always operate the cleaner with a moment. If it still does not work, dust bag installed. Undo the clean the body after turning off the clasp and remove the top cover unit.
How To Store CLEANING fILTEr your Vacuum Note: • Choose a storage location that is • Filter must be cleaned at least both safe and dry. twice a year or when it becomes visibly solid. • The vacuum comes with an onboard tool coupling for storing the floor • Disconnect from electrical outlet nozzle, slide the parking clip onto before cleaning filters.
Page 9
Technical Data For Z930 & Z931 220 - 240V, 50/60Hz Max Power (W): 1600W...